Likes
Comments
Share
@DogDoctorOfficial
Follow
Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report!
🌟 Harvest Details:
Day 75: Harvest Day
• Harvest Date: Day 75
• Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼
• Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️
Current Drying Process:
• Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄
• Environment:
• Temperature: 18-22°C (65-72°F)
• Humidity: 50-60%
Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧
🌟 Plant and Bud Characteristics:
Auto Northern Dragon Fuel:
• Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain.
• Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come.
• Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨
🌟 Care Tips:
• Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧
• Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿
• Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁
🌟 Genetics Spotlight:
Auto Northern Dragon Fuel:
• Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma.
• Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes.
🌍🌿 Fun Fact:
Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience.
For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together!
👉 Join me on YouTube Link in my profile 👈
🌟 Conclusion:
Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest!
Happy growing, and see you next time! 🌿💚✨
#SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney
Likes
7
Share
@Wiffz_CBD
Follow
A real fun grow. Loving the purple color. She weighed in around 8oz with the stems attached she smells real fruity. Had a bit of leaf burn in early flower because the cored came out ever so slightly of the controller. My fault. I noticed ZERO gnats or pest.
Likes
168
Share
@Still_Smoq
Follow
📆 Harvest Week, 19-25 August 2024
19-22 Aug - Observed and let the plant grow.
23-24 Aug - Flushed with RO water, turned lights down to 40% power.
25 Aug - Harvested the plant, began the curing process.
💚 Thank you Divine Seeds for this sponsored grow!
📑 The final week of flowering for Pablo Escobar! I gave her a good 71 days as recommended by the breeder. She grew using every one of them until the end. Another genetic hit by all means. A pleasure to grow. This is a sativa dominate variety so expect a longer flower time. You will be rewarded with thick dense buds, covered with resins and trichomes, with a sweet herb, earthy smell, nice and danky.
Began the curing process in a climate controlled closet with a RH of 53% and temp of 71deg F. The main leaves are removed before the branches are hung upside down for 7-10 days for drying. From there the buds are removed from the branches, separated, and are trimmed to remove as much leaf as possible. Then placed in quart mason jars with a 62% Boveda TerpShield packet, burped daily for about a week or until 62% RH is maintained. Then labeled and placed in a cool, dark closet for long term storage for up to about 8 months or so.
🔥 Smoke Report:
It took Pablo 10 days to slowly dry out. I cut all the buds off the branches and used my 19” Bud Trimmer for a quick finished product! I’m really impressed just how fast this trimmer works. It can take about 1/2oz or 14g at a time and with 4 or 5 turns of the handle it’s finished. Nice beautiful manicured buds in about 10 seconds. No more trim jail for me.
As for the smoke. The taste definitely is the same as the smell. Lemony or citrus. The high is definitely that of a sativa. Comes on slow, then creeps up on you hard. Stays with you for a couple of hours, needing only a hit or two to recharge the high afterwards. No doubt this strain is very high in THC, and should be taken into account for the beginner. Another genetic hit Divine Seeds!
🍶 19 Aug final nutrient solution change
🍽️ 19 Aug final feeding schedule update
💧 Using reverse osmosis water with EC/TDS at 0
🐉 Nutrient Solution EC 1.1 at 74 degree F
🔆 Light power at 50%, DLI 35 canopy coverage at 12hrs
😤 Using PYPABL, Air Pump, 400GPH
That is it for this grow. Thanks for the all the looks, reads and stopping by.
Likes
9
Share
@Munchiesfrommars
Follow
Not sure if you can believe me
I did this clone for the first time around 2,5 months ago
I have small photos but I can't upload still error uploads
This clone is a cola from my Durban poison dutch passion report
You can check
Few days ago I took few clones from go kiss and flowering Durban poison
Will see what it will show me
This Clone I guess one of the best, because I haven't seen something like this in real life
Will see how it will flower !
So its around 3 months
Hope you will enjoy this guys !
Likes
60
Share
@julian100614
Follow
Seguimos las semanas creciendo con mucha fuerza, para la semana que viene meterla a floracion y que empiece a crear buenos frutos 💪
Hemos aplicado canna zym para una mejor absorción de todos los nutrientes y la semana que viene empezaremos a cambiar su comida para que cree esos cogollos grandes 🔥
Processing
Likes
13
Share
@Meezer
Follow
Start of week 6, ended week 5 with a few only water feeds on the topped and natural girl as they showed some claw. New growth looks good and the HST girls are in their stretch...not much stretch with natural.
Hopefully the stretch and node spacing continue as is and they continue to grow through this week. It is much better than my first run.
Hope you all enjoy the photos and video and please chime in, like the grow or give me a follow. I am a sponge for information. One thing I have noticed is that all 3 girls droop hard at night, sometimes as early as 3hrs before dark...growth has seemed fine. Maybe they are tired from their daily stretch who knows.
Likes
8
Share
@HighOhioAn
Follow
What can I say papaya sherbet really thriving under low stress training starting the last week of stretch hoping to keep a level canopy, but without topping her it’s hard to keep it flat🔥
Likes
4
Share
@MistaOC
Follow
***************
24.03. Day 12
***************
The ladies are free-growing and rooted in a 19L pot with 80g of greenhouse feeding biogrow. Currently watered with 500ml
*******************************************
Likes
5
Share
@JohnnyBarrel
Follow
Week 15 - flo 6 weeks
Satisfying period: maturation time. No really problems, just a doubt about the final result in terms of quantity and buds size. Even if’s not a goal to produce big colas : I would have a bigger result with a little bit more work on the plants., like LST. The TS 1000 (150W) led was too low (for the room size) during the end of vegetative and preflowering period now it’s a 250W led).
Every plants are healthy , still green (just few classical yellow leaves on base), producing lot of pistils and resin. The indigo Berry Kush is really appetizing: Frosty and meaty. Criminal+ and Special Queen shows lot of dense little flowers everywhere and some correct main buds. The NYC turn orange and flowers become thicker.
Each plant develops a pronounced and singular aroma. I will have a choice of different flavors and tastes.
Watering around 1,5L every 3 days.
- rain water + cal/mag + bud XL + diamond sugar
- rain water + cal/mag + overdrive (NPK-1/5/4) + diamond sugar
Ventilation + carbon filter Ok for smell
Now it’s question of patience. I will start to flush next week.
Likes
22
Share
@Marijuanaut
Follow
Alright... not everyone bounced back and it´s like they´re working in two speeds! 😩
Some are thriving and I´m struggling to keep up with the training and others are lagging and don´t offer me much to work with. 😅
I had to rearrange the pots to even out the canopy and did some more defoliation. 😉
Was planning to experiment with the light schedule by removing an hour a week until it reach the 12h, but its getting too cold and the temp drops a lot with the lights out. I might keep them at 17 or drop to 16/8. But definitely I´m trying it out in the summer. 😎
The damage is done and now just have to make the best of it! ✊
Likes
11
Share
@Chuckwaggon420
Follow
This has been an amazing growth once again and I got to do the compound genetics like been wanting to for a year. This stuff is so decked out
Processing
Likes
14
Share
@StanGrows
Follow
Slowly dropping the ph down to 5.8, I can tell I stunted the growth just a tiny bit. But I checked the bottom of the cups on day 10 and I saw some root heads poking out the holes on the bottom, so the roots are growing atleast👍
Day 14
today is the last day I will be giving them water only, next watering will have cal mag and GH nutrients and silicate. Runoff was 5.9 ph, so im finally in the sweet spot
Likes
3
Share
@Nillenium
Follow
Weiter geht's! SIe pusht weiterhin all ihre Energie in die Blüten. Von mir aus gerne! Man sieht ordentlich Zucker!
Likes
3
Share
@DrewZenRox
Follow
3 Auto's set away.
Green Poison, Jealousy and Skywalker OG
Not a lot to report on as such.
14 days old.
Epic Attic 1.2 x 1.2 x 1.6 with 'Karma EVO 3'
https://ledgrowstore.co.uk/products/karma-horticulture-240w-evo-3-0umol
Ask for James, Top Bloke.
60x60x120 with Karma Stealth 1000
Strains purchased from 'The Vault' Seedbank.
https://www.cannabis-seeds-store.co.uk/
Ask for George, Top Man.
Pots/Trays/Substrate/Nutrients purchased from 'PeterleeHydroponics'
Ask for Neil, he's a Legend!
Likes
184
Share
@OrganicNature420
Follow
Germination date 🌱 12/07/2021
Day 85 08/10/2021
Strain 🍁 SinCity seeds YUZU SORBET
(Purple yuzu x whitenightmare)
THC% • Unknown
💡 Mars Hydro FC4800
• Power draw 480W + 5%
• Max coverage 5 x 5
• LED 2070pcsSamsungLM30B1&Osram660nm
• Max Yield 2.5g / watt
• Noise level 0 DB
• Removable Driver +2m cable
• Daisy chain (multiple lights)
https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧
https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸
PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com
⛺ Mars Hydro 120 x 120 x 200cm
📤📥 AC infinity 6inch
💧 10lt dehumidifier
❄️ 3.1kw air con system
💉 Nutrients GreenBuzzLiquids
Organic Grow Liquid • 1-4ml until 2wk flower
Organic Bloom Liquid • 2-4ml flower stage
Organic More PK • 2-4ml +wk3 of flower
Organic Calmag • 1-2ml/lt whole grow
Fast Plants Spray • first 3days at night lights off
More Roots • 2-5ml veg +2wks flower
Fast Buds • 5ml +wk2 of veg until 1wk flower
Humic Acid Plus • 2-5ml whole grow
Growzyme • 2-5ml whole grow
Big Fruits • 2-5ml flower stage
Clean Fruits • 5ml flush 1wk
Ph powder
Root Gel
Living Organics
PROMO CODE • organicnature420 15% off ✌️🏼
https://greenbuzzliquids.com/
🥥 Growing Media • Coco Coir
Notes 📝
Showing some great colours already 🌈 .. has a lovely citrus smell and covered in ❄️❄️❄️ 5 weeks to go 🙌🏻 .. discount codes for GreenBuzzLiquids and Mars in bio 👍🏻
Happy growing fam ❤️🌱🍁👍🏻
Likes
86
Share
@yan402
Follow
Hi this is Apple fritter auto by Royal Queen
No idea of the week as I have not been keeping track and the only updates will be pictures and a video once a week until harvest.
Wish you all a successful grow.
Likes
6
Share
@TyRun
Follow
Two weeks have passed since the flip. Plants haven’t started flowering yet, but they’ve already shown their sex. The height distribution turned out quite interesting, almost like it was planned.
Weekly growth:
#4 – 55 cm – getting pretty close to the light already
#3 – 24 cm – perfect size for my box, exactly what I wanted
#6 – 7 cm – solid progress compared to last week
Overall everything is stable. I’m doing light defoliation, removing 2–3 leaves per day where they block light from growth tips. I’m not going for heavy defoliation — after reading and watching a lot, I’d rather keep the leaves. There’s also an opinion that around week 3 you shouldn’t remove too much anyway, and in general aggressive leaf stripping isn’t a great idea, partly because of mold risks.
Why mold? Because external humidity isn’t as important as internal humidity inside the buds. The plant constantly releases moisture through transpiration all the way until harvest. If you remove most of the leaves, where does that moisture go?
Exactly — into what’s left: buds and small inner leaves. That can create near 100% humidity inside dense flowers. You can drop RH in the room all you want, but inside the buds conditions for mold can still be ideal. Add a strong day/night temperature swing reaching the dew point, and it becomes a perfect environment for mold.
So I’ll keep most of the leaves, just thinning enough to improve light penetration both from the top and bottom, without going overboard. Gradual defoliation also causes less stress compared to doing a heavy lollipop in one go. This isn’t a commercial farm with 1000 plants — we can afford to be precise and take off a few leaves every couple of days.
Nothing more to report for now. Plants are still stretching — expecting the first “buttons” any day now.
Likes
15
Share
@MrJones
Follow
MrJones Ztrawberriez Auto
🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓
💧 Feeding - Using Gaia Green Grow / Bloom and Compost Teas
🍃Training / LST-Defoliation-Topping TBA
🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between products each month for Integrated Pest
🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓
▶️Sunday 10.29.23 - Going to leave the light cycle alone for another week, these ladies are blowing up pretty well, don't want to mess with the MoJo :)
🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓
▶️Bud Description Ztrawberriez Auto produces long and fat buds with a beautiful light green shade with oftentimes purplish hues and a thick layer of resin that starts at the top of the flowers and continues all the way to the tip of the sugar leaves. It’s the typical bud structure you would expect from hybrid varieties topped with an explosion of fruity terps that’ll hit you in the face with a blend of creamy, fruity, and sweet aromas as soon as you break the buds open. Definitely a must for terp heads and extractors looking for exaggerated flavors and aromas
🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓
▶️SOIL MIX
40% ProMix HP
40% Coco Coir 70/30
15% Worm Castings
05% Malibu Compost
🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓
Likes
42
Share
@Ukfarmer420
Follow
So this week i will be repotting the ladys in 5gal fabric pots with clay pebbles and a mix of biobizz light mix soil and all mix soil. I will be starting to use 4ml/1l of water of biobizz roots.
I'm thinking of doing a 6 week veg on these ladys as I will be doing a 9 plant auto run in the 4x4.
Happy growing guys.
Likes
6
Share
@Growspeed15
Follow
Two 27 gallon RDWC system, was initially for two plants but after issues with germination and this seed sprouting exceptionally fast, I decided to commit to this one. Two 1000 watt LEDs, one Bloom/Veg switch, one full spectrum with brightness knob. Have third that is bloom/veg switch 600w to put in middle over reservoir when growing two. 8" net pots to allow more spaced out root system in such a big container with 4 air stones. 1110GPH air pump, with 4 air stones to each tote, 70GPH water pump. Initially top fed, until roots are developed enough.
