Clones termination. Mom's flowering. Yep, this is an example of how it should not be done. The clones survived two cases of tip rot and a transplant after cleaning the tips. They finally developed some roots, but still didn’t make it. I kept only one, but I need two. So… the mom is about to start flowering after stretching, and I cut eight branches again to make a second clone. After some bending and tying, the mom returned to the flower room. If your light has a flower mode, now is the time to turn it on. The fast stretch period is over, so add some red light. It helps with yield. This time we’re going to do it right, using the experience from the first attempt at cloning. Check the clones 2–5 times a day. Keep the propagator lid closed at all times, and don’t let water touch the cloning medium. Also, the cubes shouldn’t be soaking wet, just moist. This balance between water content and airflow is crucial for future roots.

starts 4 week !! the good purple tones are seen

It is my second grow here! Like it😘

The weather's finally starting to warm up. It feels so good to have the sun out and to open the windows. With all this extra sunshine, my pound cake plant is really taking off! It's growing so fast, and it's starting to look really full and healthy. I can almost see tiny buds on the ends of the branches - maybe it'll even have flowers soon!

Hello everyone😎 Week 6 of flower for the LCC🍋🍒🍪 All the top buds harvested✂️ I had a lot of fun growing this strain🤩 The smell is absolutely out of this world…the colors…💜 I have 3 different pheno,all purple,some smells more citrus and the others more ripe cherries! One more week for the lower buds and finito I already feel nostalgic😜 *what’s coming out of the yuzu is essentials oil,every year I make Yuzucello feel free to ask me the recipe🍸🍋

Going well, plant one continues to outstrip plant two significantly, but it's not as if plant 2 is weaker, if anything is has a better colour of green, I give it a little food, cal mag, and a small bit of the 3 main fox farms, later in the week Topped the biggest plant banner 1, back right corner

Just water

Coming along nicely now apart from alittle cock up yesterday where I accidentally topped her while trying too lst but I have managed too tape the stem in place so I am hoping my little cock up will force the lower branches too shoot upwards while the broken stem heals , This week I had too change my lighting too 600 true watts of kingbo dual optical LED range due too the temps getting closer too 30c than I would like , and by doing so I have now got a constant temp of 27c lights on and 18c lights out, Update on day 4 or week 3 , My little cock up snapping the main stem while trying to lst the tape seems too have really don't the trick , and although snapping the main stem is not ideal lol , It seems I've managed too top this plant and still get too keep the top , the leaves all look fresh and healthy and feed so I will leave the tape on there for two weeks and then try and remove it as all I had too hand was selotape lol The breakage really do not seemed too affect the top 2 nodes at all apart from trigger the lower plant too stretch out , as this break was bad , like hanging on by a thread bad , so really shocked it took too the repair so easily , and as always I had just been leaching the soil with a single feed that lasts them 7 days , my set up is completely automated and I only go too the grow space once a week but I have a WiFi cam inside the grow space so I can check the temps and how dry the pots are just incase I need too increase the feeding , but too be fair these autos seem too have a mad feed at week 7 and 8 and then drink one feed per week , keeping it simple has helped I think as the plants seem too love it , and I don't need too do anything apart from check the camera , And that's just the way I like it , I pay special attention too the temps in my grow space and a calculator in hand for the nutrients , Other than that I leave them alone too do what they do , I will take some end of week 3 pics over the weekend at some point it's abit of a drive so once a week suits me down too the ground , :) Update on day 5 of week 3 well as you can see from the photos this week has had a huge raise in production , the breakage I did too the main stem has completely healed it's self and the plant has bushed right out at the bottom and top of the plant where it broke , So all in all my little cock up has actually helped the plant grow larger , I today gave them a smaller defoliation basically anything covering a branch that could not be tucked under it I removed , This is too get as much light too these spots as possible too get them too develop before flowering starts , But so far so good , temps are good and no nutrient burns on any of the plants , and the results from day one / first feed on green buzz nutrients too this photo today day 5 is dramatic , the photo of all four was before defoliation , but the defoliation has just shown how busy they have this week and the bud sites on this things already is crazy , my next plan this week is too put the net in there and space out all of the branches too give the best spacing between the breaches

I’m not sure since this is my first grow but the young ladies seem to be doing fine and growing daily. Today is day 7 from sprouting and they are forming new nodes. Both plants look similar but the Jack Herer is slightly taller. 🙏 Hopefully they grow up healthy ... will keep you posted

👇 This week: --- Watered again as usual with the standard Plagron scheme + Calmag (last feeding with Alga Grow) (PLEASE CHECK YOUR WATER BEFORE USING CALMAG) Phosphorus foliar spray - red stems pretty much gone now PPFD at canopy height approximately 350-400, VPD ~1 Performed a major defoliation again Ordered more Autopots 😂 --- Happy growing and thanks for checking out my report! I really appreciate you! 😁💪🙏

Its the beginnig of week 4 and by now the growbox is complete. It was truthfully said a lot of hard work and starting from the beginning again and again... But I DID IT! Cheers to all growers!

Week 3: Vegetative Stage – Training, Defoliation, and Entering Full Flower The Apricot Autos have really taken off this week. I’ve been doing a little defoliation here and there, but over the course of training and tucking, I sometimes get a little heavy-handed and manage to break the odd leaf. Even with these occasional slips (you can see it in the pics), the plants are still shaping up nicely and getting huge, though not as much as my previous grow, which was also Fast Buds autos. By the end of the week, the plants have started to noticeably stretch, which I’m happy about since it makes them easier to train. At this stage, I like to train using mental pegs, gardening wire, and leaf tucking. I rarely remove any leaves until I have a clearer idea of the plant’s final shape, which did evolve quickly this week, prompting me to take action. On day 27, one of the plants is entering full flower, while the one with the misshapen leaf is a couple of days behind. The difference between the two is becoming less noticeable, although one is still bigger. Current Setup: Medium: 70/30 coco/perlite mix with Great White Mycorrhizae added during transplant Lights: DLI set to 22 Nutrients: Big Plant Science (introduced midweek) Despite breaking a leaf or two during training, both plants are progressing well, with flowering now fully underway.

Little green crack is filling out nicely and looks to be a week or so behind the others , tied her down and regular defol and hopefully gonna get a decent yield still . She’s a lil cutie .

Let’s see what the future holds for these lady’s

So she was chopped (wet trimmed) yesterday (F74) and is now hanging up to dry at 55% RH and temps between 15 and 18ºc. I made fresh frozen dry ice hash today using a 160 micron bubble bag, a flat surface, 8kg of dry ice and a couple 5 gal buckets. I already have the weights for that, which far exceeded my expectations. Those figures I will post once she is dried and in 1 quart screw top glass jars. People suppose dry ice hash is inferior quality vs bubble hash. I am not experienced enough to comment on that but must say it is extremely easy to make hash with dry ice, it took 40 mins to process 995g of trim which included sugar leaves, some stems and popcorn buds. I then pressed it into 3.5g briquettes for storage using a pollen press. As you can see from videos, this stuff is all blonde - and after already trying some today with some friends, it knocked our boots off! Will be back in 5-7 days with harvest figures, smoke analysis and other details! Happy growing all! P.s I ticked defoliation this week - the only week I intentionally cut any leaves off for the entire grow 😉

Flipped to flower 05/02/26

10/06/2018 Week 3 flowering and she is developing very nicely, a couple of tops poking through scrog. Drain and fill reservoir, roots are huge it will be interesting to see how many liters it will take to bring up to full. 10/08/2018 Peaked at the roots, and they are massive i fear that she will be limited in root space, 6 liters to top reservoir starting out I needed 9 liters, so I guess roots take up 3liters worth of space! Time to keep close eye on water level, as feeding frenzy is about to commence.😀, and definitely getting her stretch on!,so if i get the Captains Cake taste, I be happy,cause she definitely got some stretch i wanted. 10/11/2018 Stripped lower branches under the scrog, good growth bud sights getting denser, posting before and after pictures of week 3 defoiliating.

Letting soil dry before harvest, th strain is underestimated by growers, great buds and smells like cherry cola, they loves cold temperatures.