Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 07/12/2019 - Fed her 2l of 6.5PH water with 0,5ml of each Grow, Bloom, Max and Alga-mic, and 1ml of each Heaven and Vera,noticed about 10% run off, also added a green filter to the camera lens. Adjusted the light distance to 55cm again it was toooo close about 32cm. 10/12/2019 - Decided to go back and check the basics, removed led strip to give a proper 'night' time, changing light cycle to 20/4h no more 'exotic' 22/2h, re-checked the light distance every 2 to 3 days to ensure 60-45cm and I can tell all ready she is loving it. Also added home made Co2 made with 1 tsp of yeast, 3/4 tsp of sugar 700ml of warm water in a 1l bottle with a tiny pin hole on the cap. 11/12/2019 - Fed her 1.5l of 6.5PH water with 0,5ml of each Grow, Bloom, Max and Alga-mic, and 1ml of each Heaven and Vera,noticed about 10% run off. 12/12/2019 - 8 weeks have passed and no flowers I guess I'm flipping to 1212h to see if she reacts.

Potted up yesterday and a little lst, this will probably be the last time I run the strawberry lemonade cuttings and hoping to find a decent pheno from the orange punch to keep for at least another run or two.

These 2 cuts are growing so fast. Seems to be an XL variety. Had a deficiencies issues earlier on that are now showing but has since been corrected for.

F62- Week 9 of flower starts tomorrow on day 64, gave them a flush today with about 3 litres each, water was Ph balanced to 6.4. The green crack has some leaves that have started to die off and curl at the tips, but the buds are still looking great. Not nearly as much colour on the leaves of the other two plants, which seem to be doing much better overall. Think that whenever I choose to grow next time I may just go for the NLxSkunk1 and see how much I can get off a plant or two, its a good yielding plant that has some very hardy genetics clearly. The trichomes have all started to turn cloudy, maybe about 50/50 cloudy to clear, will see what its looking like in a week when they're about to get the final watering. That's about it for now, hope that everyone out there is staying high and somewhat dry! Cheers F68-More amber hairs now, watered again yesterday. Will likely water once more before I chop them down, then let them hang for 10 days.

11/10/21 new week for Captain future Single photos will be updated soon She bit slower then the rest but getting there topping has bin done and everything going great so far plants loving the new FC-4800 so as i 🤩 absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter. Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.

Sponsored by: 🌴SPLIFF SEEDS🌴-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 29/9 it was a tough month for me but I'm back in charge. We are almost at the end of the cycle and the flowers begin to be large and the pistils begin to color. I am a little in pain but these days I can better control the situation __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Are you new to the world of cultivation and don't know where to safely buy your seeds? Fast and anonymous shipping. Check out their hilarious graphics. (no affiliate links) ✅https: //bit.ly/spliffseeds_ __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

Flowering week 4.

Have been overfeeding these little lady's. Giving them some ph adjusted tap water to flush any excess nutes out of their systems. You can see some unusual growth at the newer most leaves. (Not the typical 5 tipped leaf like you should be seeing.) From what I understand this is a sign of too much nitrogen in my plants. Other than that these girls are holding up well. And I'll be cloning some of the strongest phenotype for a friend soon. 😉🌿

Skywalker rounding the corner. Harvested 8/7 @ Day 76 from sprout Blueberry bulking up. Glueberry og done stretching and bulking up now

420Fastbuds FBT2302/Week11 What up everyone. Hopefully all are having an amazing weekend. Weekly update in these two little ladies. The flowers on these have definitely swollen up more this week and starting to show some amber when looking at the trichs. They both are super frosty and smell absolutely delicious. Did take off most of the bigger fan leafs this week allowing more light to the lower flower sites before getting the chop in a couple days. All in all Happy Growing

Buds starting to get really fat and frosty. One of the blueberries have a distinct smell of sweet berries. Too bad its an auto or i would have monster cropped it (clone). Looks like i will get a descent and potent yield.

Starting to really fill out smell is 6/10 so far very sweet some pine as well

Hi, thanks for taking the time. "I want happiness" Remove the "I" that's ego. Then remove "want", that's desire. Only thing left is happiness.

Pretty buds and leaves nice plant lets see how it turns out

Ya tomando cada dia mas fuerza las nenas,esta proxima semana se comienzan a alimentar con alga grow.

03/01 Wow, I’m honestly blown away by how this grow is progressing! In the last 24 hours alone, they’ve guzzled an incredible 45 liters of water. 😲 I mean, seriously, that’s insane! The stretch is probably just about wrapping up, so I’m keeping busy tying them down for now. Once the stretch is over, I’ll be going in for some selective pruning—there are just so many new shoots popping up. I’ve got to say, I’ve never seen growth like this before. It’s exhausting, though, and I’ve already run out of zip ties again! 😂 So, tomorrow’s mission: stock up on more. I’ve noticed a few slightly discolored leaf tips here and there, but it’s really minimal. That’s exactly what I’m aiming for—pushing them right to the edge without overfeeding. 🎯 Also, I just realized it’s been over a week since I added any CO2. Maybe that’s why I’m seeing these tiny signs? 🤔 Something to experiment with moving forward. Honestly, I’m so curious to see where this grow takes me—there’s so much potential in these plants! Stay tuned, folks. 🌿💪 06/01: Last night, I started defoliating, and I really went at it with a ruthless approach. I didn’t worry about branches snapping while scrogging—my philosophy is simple: the strongest will survive, and the weakest will wither away. Survival of the fittest in action! I also noticed that one plant seems to be either too wet or too dry. I’ll need to keep an eye on this one because there’s quite a bit of dying foliage at the bottom. My gut tells me it’s slightly overwatered, although that shouldn’t really be an issue with coco. Still, better safe than sorry! 🌱💪

Day 8 08/07/24 Monday Light water with De-chlorinated tap pH 6.2 with half t spoon of DyNoMyCo. They seem to be loving it!! Germination week complete, Let's start the VEG 🤩 Updated short videos of strains ,✌️💚