1-17 Seems silly to start a week, but she is alive. For now 😱 Locked her up at sleep time today. I'll check on her Sunday. She is figuring out whats going on. 😂 Since last night was her last light night,( say that one 5 times fast 😂) I let Guy and Luna say their farewells. August just wanted to play. Made for some fun pictures. 😁🤘

Va a pasar a la tercera semana de vegetación el sábado 23 de mayo, la subsiguiente se hará el primer topping (apical). Las dos que tuvieron problemas en sus dos primer hojas reales, se han recuperado muy bien. 22/05 se rego con todo, un super cocktail. 27/05 las dos plantas mas grandes les hago Topping. La tercera le dare una semana mas. 28/05 las tres GDP son transplantadas a maceteros de 7L.

Respect for all of you, brother farmers! masters and beginners! thank you again for gathering on the pages of my diaries! we carry out our work with dedication and live on ambition! Come on guys!🙌👽🙌 Let's go farming

keep it up

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 01/11/2019 - Started using BioBizz Alg-a-Mic on spray, using it once per day at lights off, 1 or 2 puffs to create a light mist, only on non feed days, I mixed 0.1ml on 100ml water 6.4 PH. 03/11/2019 - Gave her 250ml plain water with 6.4PH 05/11/2019 - Gave her 0,15ml of each BioBizz Grow, Max and Bloom on 300ml water 6 PH didn't manage to get it higher to 6.3 at least. 06/11/2019 - She started to show some pistols, probably entering pre-flower. 07/11/2019 - Soil was to dry due to 2930c temps gave her 0,500ml of 6.5PH water with 0,25ml Grow, 0,25ml Max, and 0,45ml Bloom BioBizz.

This week went very well! One will be getting cut an hung to dry while the rest finish up with one more week of flush ! These ladies are smelling so lovely I hope you all enjoy! Stay tuned for next week! Cheers 😤💨💨💨💨💨

Week 12 (14-4 to 20-4) 14-4 Temps: 19.7 to 23.5 degrees Humidity: 45% to 68% Watering: 1000 ml. EC: 0.4 15-4 Temps: 19.2 to 27.1 degrees Humidity: 52% to 69% Watering: 1000 ml. EC: 1.5 Light set from 65% to 70% strength. Did a big defoliation today. (Schwazzing) Removed 141 grams of leaves. 16-4 Temps: 20.6 to 25.8 degrees Humidity: 54% to 66% Watering: 1000 ml. EC: 0.4 17-4 Temps: 18.5 to 23.8 degrees Humidity: 60% to 68% 18-4 Temps: 18.7 to 24.2 degrees Humidity: 56% to 71% Watering: 1000 ml. EC: 0.4 19-4 Temps: 18.4 to 24 degrees Humidity: 54% to 70% Watering: 1000 ml. EC: 0.4 20-4 Temps: 18.3 to 24.2 degrees Humidity: 51% to 71% Watering: 1750 ml. EC: 0.4 Light is at 70% strength with a distance of 37/40 cm. Also installed a stronger exhaust fan as the humidity is getting a bit high.

J36 arrosage avec engrais (1,5 litre/plante) J38 arrosage eau (1,5 litre/plante) légère defoliation. J40 arrosage avec engrais (1,5 litre/plante) J42 arrosage eau (1,5 litre/plante)

🌱 : 💧 : 4l day 66 💡 : Dli: 45 mol/m²/d 🤔 :

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 111821 😽💨Things are going pretty good considering our terrible luck with all things autoflower lol..I think we stopped the calcium deficiency from spreading..these little plants are drinking a ton, 3 gallons every 3rd day..using autos to dial in a tent was pretty hairbrained but things are going pretty good..the MarsHydro fixture is itching to get some photoperiods under it..I honestly can't wait!! Thanks for stopping by grow fam and happy harvests!!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

week 9 and LOOK AT THAT !! 😄 Im in love with her perfume, the smell is amazing and she is growing by the biggest autos i have ever seen, unfortunatly as you guys can see im running out of space in the 5x5, but thats what it is, super confident i will have a huge yeild from this tent. see you later, give a like and comment, tks 😎

Well the ladies are doing great in the 3 gal pots! I have 1 that just isn’t as perky as the other 2 and I’m gonna keep a close eye on her. They are growing extremely well under my KindLED X80 Veg bar!I’ve never ran just a veg bar and I really like the way it’s been working out for me! I work a lot so it’s hard for me to stay on here every couple days but I’ll try!

Day 1: Popped. Temp: 75º RH: 82% + PPFD: 250 Day 2: Temp: 75º RH: 82% + PPFD: 250 Day 3: Roots showing through the bottom of the rapid rooter. Dusted roots with Tryfecta Myco Supreme (FoxFarms) and transplanted to 5 gallon pot w/ProMix HP. Temp: 75º RH: 78% + PPFD: 300 Day 4: 5-10ml ph 6.2 water feed. Temp: 75º RH: 75% + PPFD: 300 Day 5: Showing second set of leaves. Temp: 75º RH: 75% PPFD: 300 Day 6: Temp 75º RH: 75% PPFD: 300 Day 7: Temp 75º RH: 72% PPFD: 300 The Watermelon Zkittlez is doing well sowing small signs of wet feet or over watering. She got her second set of leaves started today. Will continue to mist spray a few times a day for the next week with no additional water added.

Day 70- Switched to plain ph’d water mid-week, they have now had 2 waterings with plain water. Probably going to be 2 more in the upcoming week. Did a big defoliation mostly to help ease the final trim when it comes, but to also allow for a little more trichome development as she uses up the remaining nutrients. It’s been a much cooler week so I have been gradually increasing the light intensity to get a final push for some weight. Running at about 95% intensity at the moment with the tent hovering around 79-81 degrees freedom units. Checking trichomes daily with my 30x jewellers loupe, mostly cloudy now, some amber popping up, but mostly on the leaves. I’m watching my other strain as well, hoping the timing will be right for both to come down. I’m not in a rush, really want to maximize these buds, they are already very hard, and they will be decent producers.

New week for the Chocobang 🎶🎶Look at chocolate salted buds stick in your bong and smoke it 🎶🎶 I think the Chocobang needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Week 1 - Solid Foundation. Just Sowed Up Some Gorilla Glue Auto From Fast Buds. The Girls Are Looking Nice And Healthy For Their First Week In Seedling Stage.

small things put big things into perspective this week ... it sure feels longer than 7 days this baby plant week ... the new seedling is doing great, and with the new home I don't have to mess with it as much. i have to bring the light very close to the seedling to prevent stretching. unfortunately, the light directly above the seedling prevents me from really enjoying the growth visually and taking lots of pictures, still, the camera and timelapse helps. i think i should have started the seedling elsewhere then brought it to the pot when the roots were developed more, but it is safer here - even if it seems a little slow growing. i think the growth will sprout once the roots are directly exposed to the pressurized nutrients. it was fun dosing and using the diy doser, even though I had to prepare and dispose of a 50-gallon nutrient batch when I only really needed 2 gallons for the hpa garden. still, I can't measure things accurately manually so the plant(s) has a better chance this way. also, i get to run the doser commands manually, which is making me learn and understand better the challenges it will take to make multi-zone dosing reliably autonomous girlfriend and i are looking forward to a second week of grow

With no doubt these plants have not produced much more quantity and density of buds due to the 2 serious mistakes I've made (those who have read the weeks will know what I mean). However, I can say that I am happy with the production obtained given the mistakes made. Between the 2 plants, the one that has produced more and generated the most dense buds has been the Gorilla with the Man-lining technique applied, it has also loosed a bit less weight drying than the non man-lining one. In comparison with the Money Makers with which they have grown the result is the same. Both Gorillas have each produced more than any of the Moneys comparing them 1 to 1. Also buds are a bit dense than the moneys, but none of them is really desde at all. *****ESPAÑOL***** Sin duda estas plantas no han producido mucha mas cantidad y densidad de cogollos debido a los 2 graves errores que he cometido (quien se haya leído las semanas sabrá a que me refiero). No obstante, puedo decir que estoy contento con la producción obtenida dados los errores cometidos. Entre las 2 plantas, la que más a producido y ha generado cogollos más densos ha sido la Gorilla con la técnica de Man-lining aplicada, y también ha perdido un poquito menos de peso en el secado que la otra. En comparación con las Money Maker junto a las que han crecido el resultado es el mismo. Las Gorillas han producido cada una más que cualquiera de las Moneys comparándolas 1 a 1. Así mismo, los cogollos de las Gorillas presentan un pelín más densidad que el de las Moneys, aunque realmente ninguna de las 4 plantas ha generado cogollos densos del todo.