Likes
Comments
Share
Tag 7 - Ende der 1. Woche. Die Pflanze wurde bisher nur mit Wasser besprüht.
Likes
41
Share
This week the weather is better. The buds are getting fat and it is developing well. Smells like baked sweet.
Likes
39
Share
@BigDaddyK
Follow
FLushing, may do 2 weeks.. smell is so gooooood !!!!!!!!!!!!!!!!!!!!!!!!!!
Likes
5
Share
@Rangaku
Follow
Another week of impressive growth , chunking up nicely. Same same next week
Likes
5
Share
@Bak2Blk
Follow
7/18: I was a little worried about the girls over the weekend because they started drooping and the leaves twisting. I gave them a good feeding of Big Bloom and they've completely bounced back. I switched them over to 12/12 Sunday night and lifted the lights a bit. So far... extremely happy with this grow. Best one yet so far. 😍😍 7/19: The bf did another large defoliation. I'm crying. Buwahhahaha jk... I hate it but of course I know it has to be done. 7/21: Of course my girls have already bounced back like the bf hadn't even touched them. They're doing pretty awesome right now. I'm very happy. I lifted the lights up some but boosted their power SLIGHTLY. Will be alternating Big Bloom, pH'ed water only, Calmag, pH'ed water only Calmag, pH'ed water only, Big Bloom for the duration of flower until a few weeks before harvest then pH'ed water only for flushing purposes before the harvest. 😊😚 7/23: The girls are thriving with my feeding, watering and calmag schedule. I'd attempted to tuck some of the branches again under the net but they aren't having it. They popped themselves right back free lololol 😍👊
Likes
4
Share
@Zugzug
Follow
No food just Water (Grow Dots) Day 22 Transplant to 3gal pots Day 23 start of LST
Processing
Likes
20
Share
@mikemobes
Follow
7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.
Likes
4
Share
4.7.25. What’s up growers! Just finished up with germination and seedling stage so here I am at vegetative! Plant is at 3rd internode in 1st week of veg so time to tie down method. Everything looking good so far! Only using about 1/2 strength of nutrients until an increase is needed! Thanks for checking out
Likes
8
Share
@Rich2083
Follow
Coming along nicely now, some weight starting to be added to the buds. Leaves are quite frosty. Smells very sweet like candy.
Likes
4
Share
Que pasa familia, vamos con la quinta semana de floración de estas Rainbow Melon feminizada de fastbuds. Vamos al lío, de las 3 plantas, me quede con 2 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros. Tenían algo de shock por el trasplante pero ya fue solucionado. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Hasta aquí todo, Buenos humos 💨💨💨
Likes
15
Share
Sehr gute Woche. Wetter 20-29 °C gut Sonne, die Autos sind im Stretch und explodieren.. die Photos nach dem topping und z.T. Training sind schön am verzweigen 😁 Freu mich auf die Autos. Herrliche düfte von Apple und banana.es läuft gut 👍bis nächste Woche ✌️
Likes
22
Share
Crazy stretch, amazing structure looking fwd to see some 🌲🌲🌲 🤟🤟🤟 GHL
Likes
72
Share
Hola amigo! 💐 Cuarta semana para estas Dos Green Crack F1 Automatic. 💐 _ LLENO DE BOTONES _ Ellas son realmente rápidas, de momento estoy muy contento con cómo funciona esto para mí. Siempre he tenido un poco de rechazo a las automáticas, no les voy a mentir 🤞. Ahora ese pensamiento desaparece y he aprendido la técnica ideal para darles tamaño en su momento vegetativo 🤜🤛 La línea de @xpertnutrients me convence mucho, el agua inicial tiene un pH de 7.7 aprox y con la mezcla en el orden adecuado el pH se regula sólo! Trabajan en sincronía con el suelo vivo del fondo, que contiene la poca humedad de la maceta textil. Ph: 6.1-6.5 EC: 700 PPM 020+/020- HR: 65% 5+5-. C⁰: 19-26% Manta térmica 24 x 7 con plato. . !! .19 horas de luz: 2 x TS600 LATERALES. !! .15 horas de luz: + 100Watts CENTRAL. !! . La idea es tener un pico de luz asimilando la naturaleza pero sin dejar de lado los soportes laterales, el led central trabaja dos horas después y se apaga dos horas antes del ciclo lumínico diario 🤜🤛 PREPARÁNDOSE PARA LA EXPLOSIÓN DE LUZ QUE VIENE!
Likes
3
Share
@blaze454
Follow
Flowering nicely, starting to stack a little already. Did a 50% defoliation and removal today. going to remove some more popcorns and climate blockers tommorow. There are allot of tops. I have to train myself on training plants better to dial in how many cola tops i want and get them at the same height. Not a strong smell coming off but when you smeel the fingers , Ooohhh its so smooth ans sweet. This is looking like its going to be a big year for the tent. I am liking the Canna nutes. Delay after delay on dripper setup i am now puttin three more valves in for flushing off flush water reservoir, just waiting for parts and assembly. Home Assistant is fantastic at controlling entire setup! Lets roll with it.
Likes
4
Share
Experiencing what seems to be my first nutrient lock out. Bought a soil ph tester from homdepo its reading 7.0 so that what bring me to that conclusion on top of the slower growing and the slight yellowing around the leaves. I was being cheap and using the liquid ph tester that comes with the ph up and down and im regretting now seeing my plants in not the best condition. Im ordering a better ph pen today i used the vivosun one the i currently have got the water to 5.8 checked the run off and its at 6.2 hopefully that helps. Saturday im going to top dress and water at 5.8 aging and im thinking that should put me back on track Any advice i could definitely use some tips and pointers
Likes
32
Share
Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off Lst tranings return Nutrients started 0.5gr/1L at day 21 400ML Per Pot Day 24 Grow powder 0.75gr/1L Short Flowering 0.5gr/1L 400ML Per Pot Day 26 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot Day 28 Grow Powder 1.5gr/1L Short Flowering 1gr/1L 600ML Per Pot
Likes
2
Share
@Vet4weed
Follow
Week 7 (Feb 15 - Feb 21). All three plants are doing nicely, and River, our youngest plant, is doing a good job keeping up, but still a couple inches shorter. So, I decided to FIM the older two plants to see if it evens them out, or sends them into a growth spurt. If the later, then I'll give River a FIM next week.