Likes
Comments
Share
@Lilali96
Follow
Hat in der letzten Woche einen guten Schuss gemacht, wir sind zufrieden 😌 wie schon erwähnt zielen wir nicht auf den höchsten Ertrag aus, sondern arbeiten mit einem Low Budget und einem eigendlichen Fensterbankgrow...Doch der Sommer in Deutschland lässt natürlich auf sich warten😂
Likes
12
Share
@Sundance
Follow
The weak plant becomes very bad. I will see if there will be even a small yeald. The health plan has a beautiful purple color. I checked today the situation under a microscope and it seems to be in a good way. 30% milky, 70% transparent.
Likes
5
Share
Perfect to this point dense even colas. Smelling great covered in 💎 last week has been compost teas last one given today. Only water for the next 7-10 and nothing after that till harvest besides 36hr of darkness Home stretch time
Likes
45
Share
@PotCasso
Follow
Week 4 of Flower: HLG Diablo at 100% 18in from canopy. Watered in at 800ml top dressed 2tbs bloom, 2tbs bloom2, 3 tbs barley, 2 tbs worm castings, a recharge day and a silica day.
Likes
17
Share
Ya padamos el jiffy con la planta al sistema hidroponico , usamos floraflex en la solucion de nutrientres con un ph de 5.5 y una electroconductividad de 400 ppm
Likes
52
Share
The week ends Sunday Mar-1, being day 61 of flowering since flipping the light. From first pistils shown, it's day 45 which is a more accurate snapshot of where the plants actually are in their maturity. The buds development is progressing albeit slowly and trichomes are still clear across the canopy with lots of frost on the sugar leaves. The buds have beautiful structure and quite fluffy. Swelling has started on some calyxes. Light is maintained at 30cm above the canopy, with single daily fertigation at lights on - watering 3L per day. Fertigation pH target is 5.9-6.2 whilst flowering. Stopped the practice of fertigating at lights off due to the springtales infestation. Need to allow at least 2-4hrs of lights on period after fertigation. The coco is not dry but still damp on the surface after 24hrs from fertigation. Trying to maintaining an average RH in the space at 50% but it's getting harder now with all flowers. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom. Passive & active intake of air is from a closed off section of the room where the central heating boiler sits - the intake is warm air (20 degC.) and fairly dry (40% RH) during the winter months. - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 - ventilation fans - aquarium heater - small oil heater - small dehumidifier - 20L Airpots and 3.5L general pots for seedling stage - Canna Coco substrate and nutrients - GHE Flora trio nutrients - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy the other at the roots level)
Likes
142
Share
Hi people 🤗 A lot has happened this week 😄 The 3 Blue Cheese and 2 Kosher Tangie Kush which have been in the flowering tent for 1 week have become very bushy 👍 Unfortunately I just noticed that I completely forgot to take pictures of the Blue Cheese Phenotype # 3 🤦‍♂️🏻 The picture will be given later. The rest of the Vegi tent is also progressing very well. They are repotted in 11 liter pots this week, and then come to the flowering chamber die the following week The next week there will be new pictures, until then I wish everyone a nice start into the new week 🙏🏻💪🏻 Let it grow 🍀🌱
Likes
24
Share
Likes
23
Share
Hey guys :-) It's finally time for the space in the blossom tent to be free :-) . In the coming days I will put them in the flowering tent. Watering would be done twice this week with 1 l each (nutrients see table above) Otherwise it was checked and everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.thegratefulseeds.com/shop/feminized-seeds/limited-edition/blue-javaz/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
13
Share
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️
Processing
Likes
Comments
Share
@maxpain
Follow
Week 1 off clones ..organic way
Likes
3
Share
Terminando la 4ta semana y ahora voy a pasar a Overdrive . Espero que esto resuelva los problemas de PH que estuve teniendo. Si bien algunas hojas quedaron muy marcadas, espero que ahora deje de avanzar el amarilleo. Las flores se ven bien y las hojas chicas por ahora no fueron afectadas. De todos modos voy a seguir monitoreando el ph a diario. Hice un lavado antes de agregar esta solución y de paso hice una inundación del caño principal, pero salió bastante limpio todo. Ahora entro en las últimas 2 o 3 semanas, así que es la parte donde no puedo errar más.
Likes
61
Share
Trichome check I’ve discovered she is around 30% Amber. 🛋️🔒 Going to have to chop her down now. She sure is frosty ☃️❄️🏂 No purple in sight 👀 😬😒😪😢😭 30% amber GGGGGGGGGodaaam 🤯🤯🤯🤯🤯
Likes
11
Share
Pre98 Bubba , oh how I’ve missed you for so many years! These ones came out absolutely gorgeous! Loving the the purple phenos 😍 ! These ladies liked to stretch quite a bit so you’re gonna want to use some LST on em but I also recommend topping at least 6 times to get a better bang on your yield ! Expect nice tight purple buds with a tremendous amount of frost covering, some of the frostiest Bubba I’ve ever had! Over all I give it 10 stars an would definitely over an over run this strain!
Likes
15
Share
We've made it to day 28! - 17/12/20 The girls seem to be happy and healthy today. I won't be feeding/watering them as the pots are still heavy from yesterdays feed. A few of the girls have started to show sex & the smell has picked up a little bit(inside the tent), so I'm hoping to see some flowering begin this week sometime. (I've been using my iPhone as my only DSLR lens is useless for focusing on certain depths, but I hate the colour I get using the iPhone... I may be switching back to DSLR unless I can find a better camera app.) update - day 29 (18/12/20) Short update today. Fed the girls today and will probably be feeding/watering every day from here on out, we'll see though. veg growth has really taken off by now, I'm hoping to see some flowering this week. update - day 30 (19/12/20) I fed the girls today. I need to find a better way to hand water, the plants are so short and bushy its a pain getting in between all the branches. I wish i left my drip feed system up and running, I will definitely refine it and use it next run. Update - day 31 (20/12/20) Fed the girl's straight water today. I'm going to purchase the pieces I need tomorrow to reconfigure my drip feed system & hopefully have it running by mid-week! Update - day 32 I attempted to set up my drip feed system today but the plants are too thick around the base to place the halo around :( I will have to wait until next season to set it up, oh well, I guess its hand watering for the next 5-10 weeks Fingers crossed these girls start to flower ASAP. I fed the girls today, everything is looking good so far. I also moved the plants around to try to make hand watering easier, I had issues trying to water the whole pot instead of just one spot due to plants/branches being in the way. Update - Day 34 - 23/12/20 It definitely seems ill be watering the girls every day from here on out. All the girls look fairly happy and healthy, they're getting a bit big for the 5x5 they're in. It looks like flowering has begun on 2 of the girls, hoping to see some more progress on the others in the next few days. Thanks for stopping by! 🙏
Likes
19
Share
Let’s Go!! Today is day 31 from seed an these lil baby girls are shooting pistols an showing female productions!! Over the past couple weeks these girls been feasting up an building nice thick structures,building themselves up to get ready for pre flower pretty soon !! Everything is going just how we want it, everything is working properly, our air temp an humidity is stayin on point around 70-75 degrees trough the day and a humidity of 55 - 62% ! Always great! I hope you all enjoy an y’all have an amazing productive day! Peace , love an positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻Keep them eyes peeled for next week !!🤘🏻🔥💯
Likes
21
Share
Overall Grow Experience This run was smooth and rewarding. The plant responded well to training, Gaia Green nutrients held up beautifully, and the structure stayed strong all the way to harvest. Nutrient Line – Gaia Green Organics Organic, easy to use, and very forgiving. This line really impressed me and delivered healthy growth and solid flower development. Will definitely continue using it. Training Technique Mainlining worked great on this strain. Created a clean structure with even canopy and solid colas. Timing could be improved, but overall worth the effort. Final Thoughts I’m satisfied with how this grow turned out. Learned a lot and already planning how to improve the next run. This strain is definitely one I’d grow again. Thank you all for following!
Likes
Comments
Share
@undermink
Follow
Her buds are growing and growing.. There are still about 4 weeks until harvest but her buds look awsome just now : I hope I can wait until she's finished, hehe She's looking beautiful at the end of week 9.
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.