Likes
Comments
Share
Vamos familia segunda semana de floración de estás apollo black cherry de SeedStockers. Que ganas tengo de ver el progreso de esta variedad, las plantas están sanas, se ven con buen color. La cantidad de agua cada 48h entre riegos. Esta semana añadimos nutrientes de la gama Agrobeta. Ya puedo confirmar que elimine la plaga de tripa con aceite de nene jabón potásico e insecticida para ácaros. Las plantas están bastante bien ya llevan una semana en 12 horas de luz 12 oscuridad. Estas próximas semanas veremos como avanzan. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨
Likes
65
Share
The cherry bomb doing well. Gave her a flush and fresh nutrients. Been tying the branches down a little as they grow out and pulling a few leaves every couple days to keep them from blocking light. Will be switching them to flower next week.
Likes
13
Share
Day 77 from seed She started to drink less, about 3 liters a day. 0 fade. Another 2 or 3 weeks and she be done. This one is taking her time. Day 80 from seed: Reduced canna nutes to 50% Removed big bud nutes from res. Next week i will stop all nutes and lower ppfd + temp. Also i will turn on the 440nm in a week for tri production. 0 fade 0 amber trichomes.
Likes
60
Share
@Clutch
Follow
Hey everyone An average week. Jack 2 still doing her best and she is whitout a doubt the best girl of this round. All buds are swelling up and are looking very frosty. she is in her final period now. Gave one last feeding with nutrients and from now on its flushing time. By the end of the week (maybe 10 days) I will chop and harvest her. The night/early morning humidity is pretty high too. Around 90%... Wich brings me too NL 1 😪 NL 1 is another story Remember I said last week I found some budrot... Well it has spread to some lower buds too so I decided to end this grow. There will be something left to save but not much. It's not for me anymore too. Gonna give her away. I'm not a fan of plants that have rot in anyway haha. I still can't blame the plant herself. She had rough conditions and a stupid accident caused by me. Still a bit sad because she looked fantastic in the beginning. Oh well Will still do the harvest report next week but not sure if she will be still here then. All focus on Jack 2 now 🙂 Another grow to learn from Happy growing friends, see u next week 😉🙏
Likes
19
Share
@Comfrey
Follow
Tangerine Dream Auto - Barney‘s Farm Mein erster Indoor Keller-Grow neigt sich dem Ende zu. Es ist bunt geworden im Zelt. Die erste Blüte habe ich bereits vaporisiert und bin ziemlich begeistert vom Geschmack und der Wirkung. Leider habe ich aufgrund persönlicher Umstände nicht im Ansatz geschafft hier ein paar Tagebücher zu führen. Es war für mich ein extrem stressiger Winter und ich bin froh, dass ich wenigstens regelmäßig ein paar Fotos machen konnte. Der Anbauraum hatte zwischen den Pflanzen gemessen eine Minimaltemperatur von 17,4 Grad und während der Vegetationszeit konnte ich die Auto-Damen Tagsüber mit bis zu 28 Grad unter einer Sanlight Evo 4-120 1,5 verwöhnen. 18/6 - Licht/aus. Die Luftfeuchtigkeit war in der Veggiephase bei ca. 65-75 Prozent im Zelt und in der Blütephase konnte ich sie Stück für Stück absenken auf 55-43 zum Ende hin. Gedüngt habe ich ein einziges Mal mit 1:20 sauberem Urin am Ende der dritten Woche. Ansonsten gieße ich auf das Terra Preta ähnliche Substrat ausschließlich mit hartem Leitungswasser mit Ph 7,6. Das Substrat wurde kurz nach der Sämlingsphase mit einer dicken Schicht Laub, Braun- und Grünschnitt Mulch abgedeckt, welchen ich zuvor dreißig Minuten bei 150 Grad im Ofen gedämpft habe (Sterilisation). Es kamen Nematoden, Raubmilben und Gelbtafeln zum Einsatz, weil wir mit einer ziemlich unangenehmen Trauermückenplage zu kämpfen hatten. Anfang der Blütephase kam es zu einer Nährstoffblokade aufgrund von Überwässerung. Das Substrat hält die Feuchtigkeit sehr lange und die Mulchschicht verhinderte ein Austrocknen des Substrats. Wir haben anfangs deutlich Zuviel gegossen und das Substrat nicht etwas austrocknen lassen. Nach Anpassung des Gießintervalls auf alle drei Tage mit ca. 2-2,5 Liter, löste sich das Problem nicht in Luft auf, aber wir konnten es aufhalten. Meine Pflanzen sind bereits geerntet und hängen zum Trocknen. Viel Spaß mit den farbenfrohen Bildern. Happy Growing! 💚
Likes
9
Share
@Chubbs
Follow
420Fastbuds FBT2308/Week 4 What up grow fam. Weekly update on these two. Both have recovered beautiful after doing a major defoliation earlier this week. Hard to tell that I took off anything let alone all the major fan leafs. Still keeping the same feeding schedule of nutes every 3rd feeding with just ph'd water and calmag the other two. Since last week I'd say they doubled in size and the one that had some issues in the beginning looks like it fixed itself. All in all Happy Growing.
Likes
17
Share
So far so good. Fattening up nicely, growth has been wicked up till this point. Only vegged her for 27 days. Pretty impressive growth. Hopefully she will be ready end of next week. Dropped the feeding back slightly, will be starting the flush soon. Stay tuned.
Likes
5
Share
Don't have a lot of time these days to take pics so I'll sum things up. CO2 got outta control and the plants took tf off literally. The video is around middle of week 3, I had to flip at week 4 BC I literally ran out of room and I had to constantly defoliate.
Likes
1
Share
10.08.26 diese Woche war wenig zu tun bei den Autos. Ich habe an ein paar Blättern Gruppen von Blattläusen entdeckt und diese entfernt. Sie hatte es sich nur an den Sonnensegeln gemütlich gemacht, die Blütenblätter sind wohl schon zu klebrig. Mein Eindruck ist, das die Pflanzen nun kaum mehr neue Blüten bilden, da ich auch kaum noch neue weiße Pistillen entdecke. Nach wie vor werden eigentlich keine Blätter von alleine gelb, die Blüten schwellen stetig langsam an und riechen gut. Der Wasserbedarf sind täglich 0.8l pro Pflanze. Durch eine Rochade bekommen sie nun etwas weniger Schatten durch die großen Pflanzen während der letzten Woche vor der Ernte. Ich rechne weiter mit der Ernte Ende August. Gute Woche an alle und Happy growing!
Likes
28
Share
Great week for Mephy...other than winter being on the doorstep. 😒 Keeping her to 4 main cobs, slow and steady till she's ready for some LST. I've been adding DO (dissolved oxygen) into the water in an attempt to keep the roots happy in this tight space. So far she's loving it. If you have an aquarium pump and some airstones you can add DO to your irrigation. Worth a try if you haven't. Anyway, hope everyone had a great tiny pot week! Back to work for me. ✌️🌱 Happy Halloween everyone! Be safe. 👻
Likes
21
Share
Likes
4
Share
Resining like never this one is super cold the buds They are very compact and already heavy I will keep nutrients more on a smaller scale, I removed some fans for fresh air and more light in the cup, very happy with this girl
Likes
9
Share
@HighKing
Follow
Defoliated them yesterday. Everything looks good so far. They are very hungry. Now I am going to wait for them to bounce back. I hope we will see some big colas 💪👍
Likes
21
Share
Hey..next week the plant get the 35liter pot with same mix as the start pot...i add little helper seeds in the big pot to prevent some things like bugs and dry out to much from wind and sun....hope the sun gets brighter the next time...but for this hard conditions i would say..nice start. thanks ..... 4/25: It was extremely cold tonight, so I took the opportunity and took this time lapse shot over 3 hours... after 1 hour I added a drop of remaining osmosis water... and lo and behold, ten minutes later Calimero laid down his eggshell ... .now we can get started and I have that great shot that I've always wanted to take...sorry for the outside interruption, I couldn't miss it....in the evining after my work i kick her as instant out.....
Likes
60
Share
@Mtmtc
Follow
Time to harvest this beautiful tester strain! I will be drying in a 60% humidity!
Likes
35
Share
All 18 CANNALOPE HAZE plants from DNA-GENETICS are developping FANTASTICALLY! They love the BIOTABS-nutrients and start to show first signs of fading, now that we are coming closer to the end of flowering. The main COLAS are HUGE and glisten with trichomes, the plants are SUPER STICKY now, I love it. The smell is a earthy and mildly sweet aroma, which is getting stronger by the day, its MOUTHWATERING! As you can see in the overview-video above, the plants on the right side under the LUMATEK ZEUS 600W PRO are less uniform than the plants on the left under the SANlight Q6W-Gen.2 LED-lamps. Some are taller and some are shorter there, which is bad under a spider-system, since I cannot adjust the height for the smaller plants. The smaller plants will get too little light and produce less buds. The trichome production seems on par between the two sides, but the buds on the SANlight-side seem to be compacter than on the Lumatek side. I am VERY CURIOUS how the end result on the scales will be...
Likes
9
Share
COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
10
Share
Likes
5
Share
@DannyGNYC
Follow
Week 8 my babies are coming along. Looking healthy and getting big fast.