I am starting to cure the first plant. Yield will be posted when every plant will be harvested.

I don't think I'm going to grow autoflowers for a while. I think I have much more control over photos and they are much more potent.

me fui dos días de la casa y vean cómo estan mis dos bebés

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D50/B13 - 04/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 24°C H: 60% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D51/B14 - 05/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 25°C H: 60% 🌊 15L 🍗 CalMag, Bloom A-B, Bud Candy, B-52, Big Bud 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D52/B15 - 06/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 25°C H: 60% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D53/B16 - 07/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 80% 🌊 4L 🍗 CalMag, Bloom A-B, Bud Candy, B-52, Big Bud 💧 pH- 💼 Added pH- in order to keep the water on the lower side for a while 🧠 🚀 🎬 1 TL video ______________ 📅 D54/B17 - 08/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 80% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D55/B18 - 09/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊15L 🍗 CalMag, Bloom A-B, Big Bud 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D56/B19 - 10/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊 🍗 💼 🧠 🚀 🎬 1 TL video

THE FINAL STEP🍯 Nach 6 Tagen der Trocknung hab ich das Bubblehash weiter verarbeitet☘️ Dafür hab ich eine Grasspresso V2 mit 2 Tonnen benutzt die Super easy zu bedienen ist 😅 Ein 35mikron Bag von Graveda war ebenfalls von Nöten! Gefüllt hab ich das Bag mit 2g vom Hash und unter die Presse gelegt, gepresst hab ich mit 85 Grad und den Timer auf 300 Sekunden Die ersten 30 Sekunden hab ich nur mit den Platten das Material erwärmt und dann langsam angefangen zu pressen, ca alle 20 Sekunden wurde der Druck erhöht und ja was soll ich sagen :) Seht selbst 🍯☘️🍀💚

il ramo secondario piu esterno è anche quello piu cresciuto, è gia quasi al limite di altezza non so se continua cosi dovrò finire per topparlo o rischio che sia troppo vicino alla lampada ma se cosi fosse, quando sarebbe l'ideale topparlo? siamo gia in fioritura stresserei la pianta e rallenterebbe lo sviluppo, non so

8.73 oz from 2 plants. Very dense and potent nugs. Love it so far. Now for curing

June 21st - they are doing great with the newa ac unit. temps are saying around 25-26. They are just growing away. I decided this week I would swap there nutrients for transition to flower. I watered them today with the first mix of the recommended transition to flower. June 22nd - Still growing away, they seem to be picking up growth quite a bit now! June 23rd - Starting to explode with growth! Everything looks healthy. I have turned the lights up to about 85% now. Gave them a feeding today, again with the transition to flower recommendation. June 24th - Still growing like crazy. They are on a 12/12 schedule and it looks like they're on there way to flower! Junes 25th - Lots of growth in the last 5 days. They have perked up a ton, grown a ton of fan leafs and its almost time to do some more lst or defoliation. Gave them another feeding today. I have decided to just feed with every watering as it is the manufactures recommendation. June 26th - Took the girls out and did some LST on them again as they were starting to become pretty uneven. Unfortunately I only took pictures/videos of the one plant. You can definitely see the growth since the start of this week. They seem to be getting pretty dry by the morning so I have been feeding roughly every 24-36 hours making sure not to overwater. June 27th -They popped back up overnight and are just growing away. Another watering today. Roughly 3L per plant. Again making sure not to overwater.

Harvest

Looking forward to seeing what the cement produces!! Definitely outshone grandad Purps!

Closing thoughts. Damn easy plant to grow responds well to training have fairly uniformed plants only on kept the purple trait but that's ok we can selection breed for that. I am happy I decided to go this route with the breeding the girl scout diesel really complemented the mother plant

A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 103g !! For the light i’ve used the Spider Farmer SE-7000💡

This was my second grow ever. I started with a blueberry headband seed from a bud I got from the dispensary. This strain was very easy to grow and very forgiving. Final product had some seeds but wasn’t too bad.

Chop day. Whe hella flora funky. And nugs are hardrock. After all the stress they performed better than expected.

🌸 Week 4 Flower Report: Growth, Challenges & Big Changes! 🌸 Hey, Grow Diaries Fam! ✨ We’re here at Week 4 of Flower, and what a week it’s been—packed with challenges, adjustments, and exciting progress! Before diving into the details, let’s start with a note on my flowering timeline. While this is Week 4, I don’t start counting flower days the moment I flip to 12/12. Instead, I wait for the plants to show true signs of bloom. It’s a small but significant distinction that keeps things accurate and aligned with the plants’ development. 🌱 Defoliation: Timing is Everything! Defoliation is a critical part of the flowering stage, and I typically wait until Day 21. However, this week, I tackled it earlier on Day 17 because: 1️⃣ The room was simply too full. 2️⃣ And most importantly—the Papaya Zoap had other plans! She’s a fighter—determined, defiant, and constantly reaching for the moon. Despite intense training like super cropping, she’s still pushing upward, nearly outpacing the LED lights. Challenges like this remind us of a simple truth: gardening mirrors life. It’s about resilience, adaptation, and unwavering determination. 💪 This week, I added a second SCROG layer. While this net will support the flowering colas, it’s also there to strategically manage the Papaya Zoap. Why? Because experience has taught me that if she grows out of the LED’s range, she won’t finish properly—and that could disrupt the balance for every other plant in the tent. It’s all about teamwork, even in the garden. 🌟 Defoliation was intense, removing nearly all the leaves with stems to clear space and boost airflow. The tent now looks dramatically different! For the full before-and-after transformation, be sure to check out my YouTube channel—trust me, you’ll want to see this process up close! 🎥✨ Switching to Aptus Holland Minerals A major milestone this week: I’ve transitioned entirely to Aptus Holland Minerals. 🌊 From now on, it’s just minerals—no more organic inputs. This marks the start of a new chapter, and I’m incredibly curious to see how the plants react to these changes. Here’s the current nutrient mix: • System Clean: 0.5 ml/L • Regulator: 0.15 ml/L • RO Water Conditioner: 0.8 ml/L • All-in-One Liquid: 2.1 ml/L I’m keeping the pH at 6.1 and TDS at 556 ppm, and so far, the plants are thriving. This week also included a thorough system clean, ensuring everything runs smoothly as we enter the final flowering stages. 🌿 Bud Development: Pure Magic! The bud formation across all the genetics is nothing short of incredible. Every plant is thriving, and the canopy is lush, vibrant, and full of potential. I’ve raised the PPFD to 750 for this stage, with temps steady at 25°C and RH at 63%—keeping the VPD dialed in at 1.11. The TrolMaster ecosystem, paired with the AutoPots, makes managing these precise conditions seamless. With more time to focus on the plants, I can give them the daily care they deserve. 💚 Shoutouts & Gratitude A huge thank you to my sponsors and supporters: TrolMaster, Aptus Holland, Pro-Mix, Cannakan, and the amazing seed banks. Your incredible products and technology make this journey possible. 🌟 To the Grow Diaries community and all my followers—thank you for your energy, love, and even the challenges from the haters. It all fuels this incredible process, and I apprecilove every bit of it. Special shoutout to Brother Daggadna—check him out on Instagram and show some love! 💚 The plants are heading into the next phase of bloom, and I can’t wait to share how this story unfolds. 🌸✨ As always, stay tuned, stay positive, and let’s keep growing strong together! 🙌 Growers’ love to all 💚 #TrolMaster #AptusHolland #GrowLife #CannabisCommunity #FlowerWeek4 #NeverGiveUp #GrowWithLove #IndoorHorticulture #Defoliation #PPFD #ControlledEnvironment #SCROGNet #DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚 P.S. – A Deep Dive into the ICL-300: Revolutionizing Under-Canopy Lighting The ICL-300 isn’t just another LED—it’s a game-changer for under-canopy lighting. Unlike traditional LED systems that project light in a single direction, the ICL-300’s 300-degree design ensures even light distribution beneath the canopy. 🌟 This unique feature means that no part of your plant is left in shadow, creating a balanced environment for lower buds to thrive. Key Tech Specs & Benefits: • 300-Degree Light Distribution: This design fills the under-canopy space with optimal light, enhancing photosynthesis where it often gets neglected. 🌱 • Full Spectrum Output: Tailored to meet the specific needs of plants at every stage, ensuring quality growth from base to apex. • Energy Efficiency: Advanced LED technology delivers maximum output with minimal energy usage, keeping costs down and sustainability up. 💡 • Durability & Heat Management: Built with high-quality materials, the ICL-300 stays cool and reliable, even in intense growing environments. Why It Matters: Under-canopy lighting is a game-changer for growers aiming to maximize yield and quality. Typically, lower buds receive less light, resulting in larfy or underdeveloped flowers. The ICL-300 changes that dynamic entirely by turning shadows into opportunity. 🌟 With light evenly dispersed across the entire plant, you’re not just growing; you’re sculpting a masterpiece. For me, the ICL-300 is more than a tool—it’s a partner in innovation. It ensures that every plant in my grow room has equal opportunity to shine, from the top colas to the smallest buds at the base. When paired with a carefully managed ecosystem, like the one powered by TrolMaster, the potential for consistent, top-quality harvests reaches new heights. This isn’t just about adding light—it’s about adding value, efficiency, and balance to the grow process. I’m beyond excited to see how the ICL-300 transforms the game in my tent, and I can’t wait to share the results with you all! 💚

Todo bien en general con este seguimiento.

Welcome to my Ganja Farmer contest grow. Drop a like if you want me to drop by your grows. Either way thanks for dropping by She's doing really well. Would like for her to have bigger buds. Should of started flowering her under my P1000. She has a lovely structure and some nice colors showing up on the buds which seem to be getting nice and dense 20/6/22 she's doing really well. Growing nice and strong. This time I think I'm going to have to do bud washing as the hair is just beyond a joke now. I'm going to do a deep tent clean this week. Just waiting on some stuff and I'm going to get my tents in order. Plant is at to getting struck down with what I'm nearly sure is iron defs. Found 1 to 2 leafs starting out yellow with green vains. Let the soil dry out after a few watering and gave them a boost of Iron (fe). (Have put up a video and focused partly on showing a light iron def. This leaf showed up like this 4 days ago. Took me a day to dry out the soil so it was a little harder to notice) but if I hadn't of fixed you'd of seen what looked like a N def (a yellow leaf with green vains) hope this video helps to help u. Feel free to DM me if you need me to go into any fixes 24/6 Have installed my new AC intake unit, it's more of an AC unit the way I have it set up. I have it outside the tent. And have a negative pressure environment. So, if I can drop my outside temp then in turn the inside temp will drop. There's no point in having it set up inside with the lights off as the RH will go sky high with no exhaust set up as that would defeat the purpose of having AC in an unsealed tent setup. Be good though when I want to grow with co2 this beast will have no issues keeping the temp in check. It's doing my whole top floor. Yeah, it's struggling. Have it set at 20% but it won't drop to 20% until you reach the temp you have it set at. It was 31.5 brought it down to 27.5 in 15mins and that's a top floor in a 3 bed big bedroom house. Id say it would work quicker with the door closed but my RH will only go high and I'd have to run my Dehumidifier and that well, raise the temp. Going to see what happens by dropping the temp to 24c when the air around the pre attached probe goes down to 24 it will go to the % you have it set at. But until then, (you reach the temp) it runs at full steam. It has brought the temperature down 2.8-3c in 15mins. Update. My AC unit intake is nothing but a big ass temp controlled intake, not control temperature. It does help draw up cold air from an extended 10m ducting so I can get 18c air if I want. Just gotta run big ass ducting threw my house. Just until I can punch a hole up into my attic. It runs 16c up there. But I'll need a filter 1st and then I can drop temps rapidly. Looked into an AC unit. They are affordable. A 7000 Btu unit would do my grow room. Runs at 800watts an hour but you have to hook it up to a window. My air outside at night is that temp so I'd be better just running poxy ducting from my attic using this powerful 110watt intake. It'll be great for air flow with co2 growing. I'll hook it up from the bottom to the top and run the ducting either side and let the unit sit on top of the tent. It's so powerful won't need any fans. Just co2 and high ppfd which I have now. Thanks for reading this week. gottagrowsometime