Likes
Comments
Share
Very excited for my first grow ever. My soil is the Biobizz-Light Mix in a 11L pot .I got so impatient that i even dug it out at some point to see the progress...i hope it won't have any consequences. The first days, i only sprayed the soil with some water to keep the soil moist. At Day 4 of germination i watered it for the first time with 250ml tap water at 6,5ph. I will run my light for 18 hours now at a distance of 60cm with full power. That will lead to round abot 215 ppfd and 12k lux for the final days of germination. At day 6 after germination two darker spots appeared on the first 2 leafs. I hope it’s just because of some water drops on the leafs. Watered every 3 days with 350-500ml of 6,5ph tap water. 23.05.24: For my definition the vegetative stage starts today. I will turn the light up to 500 pphd Very excited what will happen next!
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds keep coming more and more fat and frosty each day ❄️❄️❄️❄️💜 💪keep removing some leaves 🍃 💧 Give water each 2/3 day 1.5 l Water + Bloom + Green Sensation (5 + 1 ml/l) 1.5 l Water + Bloom + Green Sensation + Sugar Royal (5 + 1 + 1 ml/l) 1.5 l Water Bloom + Green Sensation (5 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 48 cm. Mars Hydro Fan kit Setting 8, start to smeel à bit out, so I've up. Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - Deep Jealousy Auto🌲🌲 https://anesiaseeds.com/product/deep-jealousy-auto/
Likes
4
Share
Really starting to fill out now. Dont know whether its the stronger light or dry ammendments but my ladies seem a lot frostier than my last run.
Likes
3
Share
Start making flowers Adjust the light from 12 hours to 11 hours instead. Wait to observe the flowering Add LED lights to the lower part of the plant so that the lower flowers receive light.
Likes
12
Share
@Piablo
Follow
Day 7-9: Had a good environment overall, although the light was probably much too high. I didn't realise until quite late that it should have been 60cm above the seedling, and I had it around 120cm at first, and then 80cm. As a result the stem is a bit stringy. Day 9: I lowered the light to 60cm above the plant, and it won't go any lower. the recommended for this light is 30cm above the canopy, according to this very useful article: https://www.growweedeasy.com/how-far-grow-lights, but it's still in seedling stage and I'm guessing the plant will grow up a bit more, and I can always lower a little bit more. Also it's pretty damn hot, so I don't want to overdo it on the lights. I've been keeping the water consistent and just topped up a little on recommended nutrients (more grow, a little micro, adding a little bloom as it comes closer to flowering). The reason for this is because I want to maintain the consistency of environment and monitor the plant for any signs of unwellness. Because Sativas are sensitive to nutrient burn, I'm being conservative in this respect. The temperature with the light lowered is a steady 26 C, and I'm maintaining the humidity at around 70%. This is pretty good for this strain, as a sativa it likes higher temps and humidity. The water pH is around 5.9, also desirable. I've also been wondering if the plant is getting enough CO2. Is it necessary to buy a measurement device and some CO2 bags? Overall the plant seems very happy and is looking healthy. Day 10: cleaned the inside, added more grow, added more clay pellets since she looks a bit thin and stalky and needs extra support, and there were not many pellets present. Light distance is currently around 60cm. Though it won't go any lower with the straps, I will look at lowering it more with some extra rope as the ideal height will eventually be 30cm for this 250W HPS light. Added more Ph buffer yesterday evening and we're currently sitting around 5.7 ph. I was aiming for 5.8 but this is still acceptable. Temperature is around 25 - 26 C, humidity is around 70%, though I will begin lowering this as she grows. I will probably replace the water sometime this week. Upon further investigation I realised that my water levels were too high, and were possibly suffocating the stem. I reduced water levels by a few cm since I had previously been topping up without realising possible damage. I feel like today is the day that this seedling is finally becoming a plant. She has grown some long roots already. Day 11: I further lowered the light to around 40cm using some extra string. It's not super ideal, but for now it's ok. The plant was falling over it's own weight so I added some extra pellets around it for support and it seems to work. I'm hoping she won't stretch as much now that the light is lowered. The inside fan is still on and on full power to build up extra stem strength and keep temperature down. I'm attempting to keep humidity around 60%, a little lower than before. The temperature is significantly higher with the light lowered, easily maintained by periodically opening the door and leaving in cool air from outside which runs just past the intake fan. I'm slightly concerned about the Monstera Deliciosa plant which is sitting just opposite and above the intake fan. Would this have any effects, positive or negative, on the grow? Google is coming back blank on this.
Likes
24
Share
Day 21: plants acclimated great to their new 1.5g homes, and have already rebounded. I’m currently running about 47% on the dimmer of the sf7000 @ 25” above canopy. All plants are very level making lighting easy thus far. They dried out a bit since the transplant watering so I’m back to feeding roughly 500ml to 700ml per day. That may change, I want to do a bottom feed next, so we’ll see how long that takes before I stay on the top feeding and implement a standard watering schedule. Day 27: added a video of the growth over the past 6 days. Starting to show signs of vigorous growth. Excuse the Timelapse as I am leaf tucking and rotating once in a while. Haven’t seen a need to tie down yet, since the fan leafs are so huge it makes tucking easy and super viable in this position.
Likes
50
Share
@6ix6ix6ix
Follow
Salute everyone! We have a liftoff! Since this is my first grow i spent the last month at least in research, tents, lights, strains, nutrition (omg), growing medium, watering, temp, humidity and so on! Total overload. When i got my tent and seeds, it was time to visit my local grow shop, and the nicest of people who happens to be the owner, reassured me that im going to be fine. And thats my plan. Read some diaries here and I’m really looking forward to engage with the community! Today is 01/09 - the day it begins. Seeds are in the soil. 01/09 - morning Implanted the seeds at night and turned the light at 20% power about 50cm away from the surface and turned the vent to around 25% The himidity dropped to 55%. so I’ve decided to turn off the vent for now. Now the humidity is around 65% which i would like to keep thru seedling/veg stage 03/09 - midnight Full 48 hours has passed since the seeds were planted. No signs of life so far. 03/09 - 70 hours after planting the germinated seeds in the soil 2/3 have srouted. The third one didn’t have a root when planted, but was cracked open, so i guess she’s lagging a little. Tomorrow morning will switch the lights to 18/6. 25% of power. 04/09 - 84 hours after planting All three girls are up. Switching light to 18/6 (25% power) Installed a go pro to shoot a time lapse. 05/09 - morning Seems that nothing changed overnight. Compared my plants with a day by day progress reference i found on the web. So i decided to help the plants and remove the shell of the seed. Seems went well. Only plant 1 managed to remove only one half, second half is glued. 05/09 - afternoon After removing the shells i noticed that the cotyledons are glued together by the residue on the seed. Performed a microsurgery (neurosurgeon wanabe) Attached. Finally the plants are free and exposed to the light
Likes
2
Share
@TTerpz
Follow
Start of week 4 Watered 8/25
Likes
3
Share
Last week we started with LST and this week we will continue but also do topping.One week closer to the goal 💚
Likes
1
Share
@lalee
Follow
first time I grew Dutch passion, and it was orange bud auto. I love Sativa dominant strains, and this strain is now on my favorite list. First on my list is Amnezia haze auto, which is 70% Sativa dominant seedstockers and fastbud seeds. I love it. The second is chocolope DNA genetics feminized; this strain is really heavy and many thc. Three is orange bud auto from Dutch Passion, really nice buds, many thc, and long-lasting sativa effect. This strain really tells you that you are really high.
Likes
41
Share
So thus is how the ladies are looking at the end of Week 2, day 24 from Seed. So I have transplanted the ladies into their final pots and I have uploaded a video for you guys to see. Happy Growing guys, any questions just ask away. 👍🏾🌱💚😎
Likes
26
Share
Start of week 2 from seed . I introduced 8 more plants 2 ogesus og 2 amensia haze 1 royal haze 1 amensia gold 1 rhino Ryder 1 caramella The other 4 are doing really good !!! Coming close to their firsts small feed g! Little update day ten or 11 from seed sprout girls are working on their second and third leaves sets and I have 100% germ rate all 8 broke through the surface so excited! Little update at day 9 gave them all a small feed !!! All 4 looking amazing the new 8 5 outta 8 showing first true leaves 2 with shells and 1 still under !!!
Likes
11
Share
Likes
59
Share
@Hologram
Follow
Last update, ready or not!😎 Autumn is really starting to rear its ugly head, rain is starting to reighn.. now she only gets just water.. (love the irony😳) Happy growing4all✊ ***KISS! Growingtechnique: KeepItSimple,Stupid!😉
Likes
Comments
Share
@PapaTerps
Follow
British Delight - Wizard Trees Day 41 - I've watered her with 2L of RO tap water with nutrients, mixed individually, in order, and finally pH'd to 6.3. This week, she has been moved from the veg tent, to the flowering tent, so she is now on a 12 hour light schedule. Much like the Wizard Fuel, she has already started the stretching phase of flower and has nearly doubled her size in 48 hours 👏🏻 So far, these girls have blown me away with their genetics, so impressive compared to other brands that I've grown 👍🏻 because she is stretching, I dont want to stress her too much, so I'll be keeping the training and defoliation to a minimum until she finishes her stretch and moves on to the bulking phase 🙏🏻 so far, really good!!
Likes
16
Share
It is day 30 and we are finally seeing some growth starting after a few days of being locked out due to what I believe is from nutrient burn. Won’t go as heavy next top dress. I have ordered a soil ph pen which will be arriving tomorrow so that I can’t test my soil ph and the run off. Until then I have ph'd the water to 6.0 to hopefully stimulate more growth before flower. These plants are very short but stacked! I can’t wait to see how big they are at pre flower. After it’s 3rd week stretch. Reach for the skies bitches! Watering less aswell. I believe iam overwatering because I go days without seeing these girls. Exhale c02 bag doing well. Resembles mould at the moment. I want to take a moment to thank everyone who’s visited my diary. I hope to bring you great content! Always open to helpful suggestions. Stay tuned! Day 34 and we are at pre flower. See those hairs comin. Now they all gonna streeeeeetch. Drop a comment, like, or just offer me some advice. We’re all family here ✌️. Doin a little LST now that the space between the nodes are far enough for me to feel comfortable doing so. There was no where to put them no matter how slow I tried haha. Also have each girl in something that resembles the cross face chicken wing from the WWE. Little fan on fan action. It’s like the leaves were meant to stuck together. The knotches in the leaves interlock I mean. I stretch the upper fan leaf to the one directly below it. Opening up both shoots. Hope they made sense lmao.
Processing
Likes
1
Share
Likes
39
Share
Installed UVA, set it to 7h a day Defoiled a little...plants are not in a perfect condition so i didn't remove much.. Buds are still forming greatly! Found some herms on 1 plant...removed them and will keep a closer look every 2 days now...
Likes
81
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 6/4/22 🤘🐱 Week 6 is here!! The "Fast" strains are getting super close, I think they'll be finished by week 8..calmag issues came up the minute we ran out, we got some more today and gave them all a good dose but we're cutting all nutrients after today, they'll get water only until harvest (color be damned lol)..The White Widow fast can eat a ton but the Amnesia fast seem very intolerant to even light nutrients...the separate feeding regiments in the same tent hasn't been fun but I'm glad its now behind us..We have a Chemdawg#4 in the same area but she appears to be weeks behind the "Fast" strains..We're excited for this harvest, our personal supply is getting dangerously low. again lol...we have several White Widow Fast clones we may flower immediately after these, or give away to family, smoke quality will be the determining factor...The SP-3000 is the best light of its size we own, this is the 3rd complete grow and we couldn't be happier with how dense ,tight and long the buds form..,strains we've grown in the past under CMH/HID (315watt) do so much better under the Marshydro,... its the only tent we have that we don't worry about getting complete coverage corner to corner, absolute best bang for buck imo... thanks as always for dropping by, we'll be sure to update if anything crazy happens..Happy harvests everyone!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_