Likes
Comments
Share
@Kinghaze
Follow
This was the last week I will give them 3 more days to finish Then i will try to dry them for minimal 1 week .
Likes
6
Share
The time has come!!!! I was gonna give it a couple more days but I’m too antsy and want to get this girl drying already. I will be cutting her down at the end of today she has been getting straight water these past week she isn’t getting any color just yellowing of the leaves. She smells minty when defoliating but the buds smell skunky and dank asf. Light green buds remind me of old school weed I used to smoke in HS shits amazing.
Likes
2
Share
@SamDo
Follow
Journal de culture - Semaine 3 de croissance La plante a bien repris sa vigueur cette semaine, développant une belle masse racinaire, ce qui est très encourageant. Elle continue de se développer et je m’efforce de la maintenir la plus basse possible en utilisant des techniques de Low Stress Training. J’ai essayé le pinching, qui consiste à pincer légèrement les extrémités des branches pour les courber. Cela permet de rediriger les hormones de croissance vers les parties inférieures, ce qui maximise le développement des pousses. J’ai également effectué une légère défoliation en enlevant quelques grandes feuilles superflues. Pour le reste, je surveille principalement le pH. J’essaie de le maintenir autour de 5.8, mais avec les tampons présents dans les produits Terra Aquatica, il remonte régulièrement à 6.2. Je me demande si ce pH légèrement élevé pourrait être à l’origine d’un problème de coloration des feuilles, car la plante semble présenter une légère carence malgré la présence de tous les nutriments nécessaires. Je fais attention à ne pas ajouter trop d’acide afin de ne pas surcharger la solution nutritive. Globalement, la plante est en bonne santé et continue de bien évoluer. Je pense passer en floraison d’ici une ou deux semaines maximum. Étant donné qu’il s’agit d’une variété Jack Herer, qui a tendance à beaucoup s’étirer en floraison, je préfère la maintenir encore un peu en croissance pour travailler tranquillement avec les techniques de Low Stress Training et la défoliation. On verra son évolution la semaine prochaine ! 🇺🇸 Grow Diary - Week 3 of Veg The plant has regained its vigor this week, developing a strong root mass, which is great. It keeps growing, and I’m trying to keep it as low as possible using Low Stress Training techniques. I’ve been trying pinching, which involves lightly pinching the tips of the branches to bend them. This redirects the growth hormones to the lower parts, maximizing the development of new shoots. I’ve also done a bit of light defoliation by removing some large, unnecessary leaves. Other than that, I’m mainly monitoring the pH. I’m trying to keep it as close to 5.8 as possible, but the buffers in the Terra Aquatica products keep raising it to 6.2. I’m wondering if this slightly higher pH might be causing some discoloration on the leaves—it feels like a deficiency, even though all the necessary nutrients are present. I’m cautious about adding too much acid to avoid overloading the nutrient solution. Overall, the plant is healthy and continues to grow well. I’m thinking about switching to flowering in a week or two at most. Since this is a Jack Herer strain, which tends to stretch a lot during flowering, I want to keep it in veg a bit longer while working with Low Stress Training and defoliation. We’ll see how it evolves next week! 🤘😎🤘
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
11
Share
Quite the week, finally got to transplant into a larger container, hopefully the roots open up and explore soon. First round of LST completed as well.
Likes
107
Share
💩Holy Crap Growmies We Are Back💩 Code Name FBT2309 Well growmies we are at 14 days in and everything is going great 👌 👉 Started to do some low stress training👈 We all ready got , some Pre-flower showing already 👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
Comments
Share
@BruWeed
Follow
11/10 - empezo su quinta semana de floración. Se encuentra perfecta, su olor es muy fuerte y esta muy resinosa. No tuve ningún problema hasta el momento. Su evolución fue muy rapida en comparación a otras geneticas que cultive. Aprox le faltaría un mes mas para ya poder podarla, los pistillos se encientran muy blancos por el momento.
Likes
3
Share
I think she needs 1-2 weeks more This time this strain is extremely slow in the flower But let’s wait
Likes
49
Share
@Roberts
Follow
RSV11 was starting to get a little pale and lighter colored this week. I did a solution change today. She is starting to bulk. Colas are collecting some resin around the sites. Everything is looking okay at the moment. Thank you Terpyz Mutant Genetics, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
10
Share
The 3 blue cheese plants are on the left side of the tent under 1 light and the 1 x sunset sherbet plant is on the right side under the other light Still using veg nutes for first 2-3 weeks of flower till stretch is done then start the boost and will add pk13/14 on start of week 5 I keep tucking them under the net for the first 2 weeks of flower then just let them do there thing and will add another net to support the buds
Likes
9
Share
@CandyFarm
Follow
in general, the week was simple, I slowly stretched them over the grid. now we have it, the flowering stage begins
Likes
9
Share
@MassEric
Follow
Another week down and I think its time to move the camera up a bit. Getting hard to keep them both in that dumpy camera's optics. At some point I'm doing to invest in some decent glass for these videos. The plants seem to be rocking along fine after their initial topping. Did some light defoliating here and there but I'll pretty much leave them alone from this point on. I might do a bit more training but honestly I'm not after a perfect canopy.
Likes
7
Share
The Ladys are now in their last week and only going to be flushed without nutrients till harvest
Likes
2
Share
@Stiggy
Follow
19 Oct: Raised the light to 50 cm. 35 cm tall. 20 Oct: Put on a few more LST clips and pulled some fan leaves back with wire. Dehumidifier is running now too, humidity was getting a bit high for flower. 21 Oct: Watered 2.5 L with Bio-Bloom 2 ml/L and Bio-Grow 2 ml/L. Took off the lower nodes and some big fan leaves that sat in the dark, and bent a few stems to even out the canopy. Lamp now at 60 cm, 90 %, about 660 PPFD measured. 22 Oct: bent some stems in the morning, she's recovering fast 23 Oct: Gave her 2.5 L, Bio-Bloom 3 ml/L + Bio-Grow 2 ml/L, all soaked up with no runoff. Lowered the lamp to 40 cm and measured the light at 9 spots: 846 PPFD average. All of week 5 (19–25 Oct): water 7.5 L. Bio-Bloom total: 20 ml. Bio-Grow total: 12.5 ml. 24 Oct: Lollipopped the lower stems and did a bit of LST. 25 Oct: Gave her 2.5 L, Bio-Bloom 3 ml/L + Bio-Grow 1 ml/L.
Processing
Likes
17
Share
@Gordy
Follow
Nothing too wild happened this week. I trimmed her up a bit today before taking pictures, she’s looking good. Doesn’t seem like much is really going on with the plant, but the buds do seem to be getting bigger. While trimming today, I think I found a spider in the leaves I removed. Should I be worried about this? It’s either eating insects or it’s just in there right? Hopefully there are no bugs for this thing to eat. 4 more weeks of flower. Wednesday update: Had an issue. Seems my timers stopped working. Light and filters/fans. Not sure when it happened, but I've reset lights to the normal time setting. Hope this doesn't affect her
Likes
5
Share
@alafmalaf
Follow
The plants are stressed AF and after more research from being here I'm seeing the problems. I got another fan and put it on the intake duct so that air was being actively pushed in rather than passively from the other fan which only takes air out. And then I got a photometer app called photone. So I fixed it until it read 100 on the PAR meter which the guys at the grow place told me was good. Now with this hygrometer I can pay attention to this and maybe set up alerts for when the VPD exceeds a certain range.
Likes
31
Share
@Chubbs
Follow
SuperSativaSeedClub PurplePunchOG Auto Week8 Weekly update on these three ladies. Been an eventful week for them. I decided to transplant from the original 1gal fabric pot to a 3gal fabric which I never do on autos but I was fighting keeping them happy in the smaller pots. So will see how they take it. Plus I lollipoped the bigger one taking off the lower nodes. All in all Happy Growing.
Likes
58
Share
@Kynareth
Follow
buds are getting fat and smell is more intense now. the watering level is low and the leaves are yellowing so i won't refill it because the plant is near to harvest. I recorded a microscope video to see trychomes (sorry for my bad pulse) but enought to see that buds aren't ready to harvest, maybe the next week.