Likes
Comments
Share
@Robom069
Follow
Day 47/48 introducing the 12/12 on high power leds on the ladies lookin good so far the black domians nmow oin the right and the acid dough on the left i think both lamps work very similar
Likes
52
Share
@Stick
Follow
💣💣💣💣💣 A gigantic ball full of buds 💣💣💣💣💣 Considering the number of colas I'm expecting a few more days than the breeder's schedule.
Likes
66
Share
@Hashy
Follow
Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #1 no runoff 7.15pm Lowered light 3cm #1 DLI= 26.8 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #1 no run Saturday 4/3/23 Day 39 5.00pm #1 Height= 28CM Dist= 40CM DLI= 25.3 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #1 no run #1 DLI=25.8 Lifted light #1 Height=29CM Dist=46CM DLI=21.0 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #1 Height=29CM Dist=46CM DLI=21.0 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #1 Wedding Cheesecake FF still hasn't started stretching so I'm thinking she is going to be a short and bushy. She is looking really healthy and I think she is spread out enough not to cause any problems with airflow. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.
Likes
2
Share
@Bluemels
Follow
Tag 46: Die Pflanze sieht schon sehr gut aus, und duftet auch schon.
Processing
Likes
3
Share
Week 6 is going good, all are in flower and looking ok. Purple Punch flowers look a little small but hoping to see them swell as she looks to be done stretching. Starting to see some frost forming on Zkittlez and OG Kush. Pink Kush has some beautiful, almost black color. Lights are 18/6. No nutes. PH 6.5 water.
Likes
44
Share
@Roberts
Follow
Bubba Kush Mintz Autoflower is doing great. I think I have a pest issue in the grow room. So I am treating her with neem oil. I will repeat a spray and wash off treatments a few times this week. Hopefully it stops them, and my plant can be happy. She didn't have them directly that I can tell. But neighbor plants do have some issue. It is my last ditch effort to treat them prior to them flowering. Neem is gross on buds. Beside that she got lollipopped and defoliated. Looking good till neem wrecks the leaves. Thank you Aeque Genetics, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
4
Share
Die Woche ist im großen und ganzen sehr gut geloffen. Sie hatte nochmal einen deutlichen Schub gemacht und nach Anzeichen der Blüte gab ich ihr das erste mal mein selbst gemachten Full Spectrum Bloom Ferment (angelehnt an knf aber deutlich verändert mit vielen tropical ingredients🙃💚)worauf sie super reagiert hat ,sie zeigt schon noch drei Tagen eine deutlich satteres grün. Dann nahm ich als vorsichts Maßnahme die Blütenstände die am nähesten am hauptspamm waren weg um einen besseren Air flow zu bekommen und dann gab es nochmal lecker essen (Bloom ferment )💚🙃 Was meint ihr ? Danke fürs rein schauen Happy grow💚
Processing
Likes
3
Share
week 9 was a good week I watch my pollen sacks grow into beautiful pods cant wait to use it plant doing pretty good health and strong
Likes
3
Share
Likes
3
Share
Likes
6
Share
After you found some good sector and clone it you let the mycelium grow and fill almost all the petri dish like I did last week. So now you're ready to move forward. Making grain spawn!🍄🍄 For grain you can use Organic Rye Berries, but you can also get away with wheat berries, or brown rice or even corn kernels(which I used myself) ! And you'll need some mason jars or honestly I used some jars that I had home just clean them very well and sterilise before using Making a grain spawn can be broken down into 6 easy steps. 🍄Hydrate Grain By Soaking 🍄Make Specialized Lids 🍄Simmer, Drain and Dry The Grain 🍄Sterilize 🍄Put your agar in the jar 🍄Colonize 🍄Soak the grain by placing it in a bucket, covering in water, and leaving it for 12 -24 hours. Easy. 🍄Drill 1 hole on top of the lid. Right in the center and cover with a small dab of high temperature silicone sealant, and leave it overnight to dry. And your jars are done. There other diff types for different methods like liquid culture etc. But I'm just going roughly through what Ive done. 🍄The next step is to simmer the grains on the stove. This will thoroughly hydrate the grains, and will soften them to make them easier for the mushroom mycelium to consume. Cook soaked grain on the stove for about 15 minutes. You don’t want to cook it too long, because eventually all the grain will crack and you’ll get some mushy grain spawn. We don't want that. 🧐After the grains have simmered on a low boil, you’ll need to drain them off. What I did is I drop them in the sink with the drain cover on. The grains will drain over an hour or so, after which you can go ahead and fill your jars. 🍄Once your jars are filled, they need to be sterilised.This kills off all the other nasty contaminants in the grain cover the lids in tinfoil (to prevent water dripping into the lid) and then just pressure sterilise them for about 90 minutes at 15 psi. 🍄After that let them cool down. Get your SAB, wipe down the walls with some alcohol wipes and place the jars inside. And wait untill they will be warm to the touch... not hot and painful 😤patience is key. Bring in your plates that had been stored by you in a dark place. And what u have to do is sterilise your scalpel and just accurately and efficiently decide your mycelium into about 10 pieces and quickly place them in your jar. And complete for every jar u make. You have to be very quick. The more you keep you're jar and your agar plates lids open the more cans they will get contaminated. There certain technics you can see online.. 🍄Ones you're done close all your jars lids tight and Jake your jar so the mycelium pieces will mix around the jar and place them in the dark place to colonize. And just keep waiting... 😅 Untill the mycelium will conquer your grain. Keep your eyes on the jars, any weird smells or colour during the waiting time.. because that would mean you got a contamination going on. Oh yeah and when about 55% of your jar is filled with mycilium shake the sh*t out of it so it will break the mycilium inside and make spread more faster.
Likes
2
Share
Week 4’s in the box and these plants are lightning quick outta veg. We’ve confirmed the presence of at least 3 males and 1 guaranteed female so far. They’ve all started to hit vegetative maturity in full stride so it won’t be long until we look to flip. A couple have been topped once more for the sake of additional colas and if we get lucky, the remaining females may be suitable for a scrog. Either way, can’t be much happier about how well they’re growing at this stage. Here’s hoping it remains so through flower🤞. ***Notes: strongest plant to this week is first confirmed female. Prob a prime candidate for cuts and back pollination with the F1 pollen dump.***
Likes
75
Share
@Dedon
Follow
Hi everyone ! everything is going well, except i have burn some leafs with light ( i was too greedy and put the light too close ) but it's only on 2 or 3 leafs so it's ok. i can't wait !! i wanna taste it 😍😍😍
Likes
35
Share
Massive PH swings are now levelling out. Using Organic Alaskan Bloom to lower the PH instead of the huge amount of PH Down it usually take. Needs less (about 5-10 ml) to lower the PH back to 5.7 from 6.4. BHB2 is more Sativa in appearance but is going to finish about 1-2 weeks ahead of BHB1 which is more indica like. (Appearances can be deceiving!). Have already flushed BHB2 for 24 hours with fresh RO water, replaced half with fresh then added GHE Bloom, Micro, CalMag, then the organics (Hygrozyme, Tarantula, Microbe Tea *Formula below.) Will do a final three day RO water flush when all the trichomes are cloudy (My fave harvest. More 'up') and about 10% amber. Am not worrying about PPM or EC at the moment. The microbes and organics are kind of messing with it. Had a potassium deficiency in BHB1. Treated with more GHE Bloom. Seems ok now. Blueberry Headband (2) from Humboldt Seeds. https://www.humboldtseeds.net/en/blueberry-headband/ Lighting https://www.horticulturelightinggroup.ca/products/260w-qb-v2-led-kit DWC Nutients https://generalhydroponics.com/floraseries FloraGro .5 ml/l FloraBloom 2.5 ml/l FloraMicro 1.5 ml/l Cal Mag 1.5 ml/l https://generalhydroponics.com/calimagic  Diamond Necter: N/A https://generalhydroponics.com/diamond-nectar SuperThrive: .5 ml/l https://superthrive.com/ Epsom salts Tarantula https://www.advancednutrients.com/products/tarantula/ https://hylineproducts.com/products/hygrozyme/#one Grozyme: 2.5 ml/ltr Brown Slime Root Rot Organic Microbe Tea 8 liters RO water 5 ml (1 tsp) organic sulphur free molasses 5 ml Alaskan Organic grow fertilizer (or something comparable) 5 ml Alaskan bloom fertilizer (or something comparable) 5 ml Seaweed or kelp fertilizer Handful of composted horse pucky Worm castings, sea soil, Gaia General Purpose and Bat Guano Phosphate optional * add after brewing 2-4 ml Advanced Nutrients Tarantula
Likes
33
Share
@burnerac
Follow
Day 43: Pulled timelapse. Looks like we will need to water in a day or two. Wish I had more light. Not sure how to report height since I am tying it down. Seeing some more brown tips. Thinking nutrient burn so my next watering will be without nutes. Day 44: Nothing to report Day 45: Added 1 gallon of pH 6.0 water. Day 46, 47: Nothing to report Day 48: Added another tent stake to work on LST but the plant may be stronger than the tent stakes. She's also getting thristy. Day 49: Nothing to report
Processing
Likes
5
Share
Hermosa planta, sigue su crecimiento como una campeona, esta semana ha comenzado a despuntar flores, empieza a llenarse pelos blancos, consume bastante agua y nutrientes pero vale la pena ver como los utiliza!! 💪💪💪 Esta semana le voy a colocar un tutor, a planta se esta yendo ligeramente hacia la izquierda y es un potencial riesgo de quiebre una vez que cargue los cogollos. 😎 Beautiful plant, continues its growth as a champion, this week it has begun to show off flowers, white hairs begin to fill, it consumes a lot of water and nutrients but it is worth seeing how it uses them !! 💪💪💪 This week I am going to place a tutor, a plant is going slightly to the left and is a potential risk of breakage once the buds are loaded. 😎
Likes
9
Share
@Grey_Wolf
Follow
Mr Nice Seeds Angels Breathe Even tho it's still spring here in Australia , my part of the country is already experiencing days over 40 degrees celcius 😐 With a forecast of up to 42 for this friday the 1st of November 😥 The two Angels Breathe are going beautifully . 😀 I gave the pots a spin around in posistion so that the plant gets lots of air from the fans Other than that I continue to just give them water when they need it , Keep it simple is my way of growing . Cheers as usual for stopping by 👍
Likes
18
Share
Plants were left for 8 days between watering, the soil was very dry and plant leaves drooping. Watered them with 1 litre each yesterday but have noticed yellowing of leaves on the bottom. Thinking this might be due to under watering I am not sure. Apart from that the flowers themselves are looking fine. Night temps are now 18 deg and 24 daytime and humidity at 50% I have also now put in a small fan at floor level in the space of where the 4th pot was so this now gives lower air movement.
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 70/0 Flipped to 12/12 - increased ppfd by 100 and worked to stabilize temps/humidity with new gear. I used 15 minutes of IR light before main lights and then 30 minutes of UV light at mid day and will still use 15 minutes of IR light after main light are out. I plan to increase the time of UV lights to a max of 2.5 hours per day mid day but for now Im easing her into the treatments. Watered with 1.12 gallons of 6.3ph de-chlorinated tap water, used 50ppm of veg mix and 50ppm of bloom mix in the water. VPD is mostly steady 74F/65%RH/33%ILV Day 71/1 tested and calibrated my meter, tested the top soil 1 day after feed for ph - tested 4 times for an avg of 6.48 Trimmed brown leaves and did some HST/LST training/binding. Took control pics for UV treatments of 15 minutes per day. Will monitor and increase weekly it she holds up okay. Still doin 15 minutes of IR light before and after lights on/off. PPFD after training was 630 at highest and 540 lowest. VPD was 74F/60%RH/33%ILV Day 72/2 Just a watch today, VPD was 75F/60%RH/setting 4/10 of ILV (about 33% like the last tent) PPFD ranged from 530 to 650. I only used 5 minutes of UV light today as she has a tinge of browning on the tips of a few leaves. Im not cutting it out completely because I still plan to use upto 2.5 hrs by end of flower, so she needs to adjust. Im also still using 15 minutes of IR before and after main light schedule. Her stretch seems to be picking up, from 16 inches 2 days ago to 18 today. Day 73/3 VPD same as yesterday 75F/60%RH/40%ILV PPFD hit 670 at highest and 550 at lowest. Stayed with 5 minutes of UV light and monitored burnt tips from previous days... no spread, so I may add 5 more minutes tomorrow and monitor. 15 minutes of IR before/after main light schedule. Growth continues, another inch in stretch to 19 inches. I turned her slightly because there are still two runted colas that I rather provide more light to. It's been 3 days since last feed and I think with as much growth as she's putting on, I should feed again tomorrow. Im still introducing nutes in lower portions but will add 300ppm and feed about 2 gallons at a 25/75 ratio of veg:bloom mix to see if I can get some run off to measure conditions. Day 74/4 Watered with 2 gallons of 6.4 ph de-chlorinated tap water. I added 300ppm total of 25% Veg/75% Bloom. Starting ppm was 296; ending was 595 and I added a pinch of epsom salt. Poured over the whole base until I got runoff - Since I was so close to the whole 2 gallons, I used it all. I only used the feed water over the roots today as I want her to get the nutes from the soil since the transfer into new soil was so recent. So far VPD is 75F/60%RH/40%ILV. No issues with controls. PPFD was upto 700 at center so I raised the lights to almost 42" from soil - Since the plant is almost 20" that's 22" leaves to light. New PPFD now ranges at 480 to 650 on 70% power. I increased UV time to 10minutes today and took control pics for light burn. I am still using 15 IR before and after main lights. Took some black back picks since I think she's looking good now. Day 75/5 Started the day with evaluation of ph and control pics. Comparisons show no further spread of lock out issues from earlier or light burn of a more recent change. Upto 20 inches before HST/LST today. Meter was tested/calibrated and soil ph was tested 4 times for avg of 6.34 (yesterday's runoff was about 6.35 too) Soil temp is about 66F. Also tested CO2 and got 1050. Room VPD was 74F/60%RH/30%ILV I spread the leaves further apart because I noticed there were two colas not getting as much light and somewhat crowded by the colas near by. So I positioned the larger part of the tomato ring around the limbs extending here out to 32x32 and the used HST/LST to break and bend the center colas inward clockwise (I think I went a bit too hard on one as the others already show a bounce back and now one is still limp-ish (will monitor obviously) But with that the height is now 18" so 32x32x18 - but here's the kicker, I only have a 24x48 tent, so there's a few colas touching the walls and doorway now, so I may have to reconsider the larger ring. New position, new PPFD right?, not exactly, for some reason these settings still gave me range of 480 to 650 as I had yesterday with just a few more of the outer colas have 480 than yesterday. However, there's more light getting lower levels now and I only had to cut 1 leaf. Which is good because I did 15 minutes of UV today with the regular 15 minutes of IR before and after main lights. Day 76/6 VPD is a lil wonky now as humidity is starting to go up in the tent - so I plan to put in the dehumidifier this weekend and just leaving the humidifier off today and tomorrow. Heat seems to also be ticking up - so I reduced the temp on the heater and will monitor. Temps about 75 to 76 - humidity at about 62% as high as 65 though and Im trying to be at or under 60 this week. Increased ILV to 40% I repositioned the fans to hang on the lights while blowing down onto the plant. I tried to make every leaf dance a little. LST seemed to hold up okay - had to reposition a few branches and thinking I may have to build a larger box this weekend since the colas are now pressing the door and back wall. PPFD is between 470 and 700. I used 15 minutes of UV mid day with 15 minutes (30 total) IR before and after main light timers.