Likes
Comments
Share
12 weeks / 84 days old today. So my first grow journey is coming to an end! Not a lot to report this week. Been using my jewellers loupe daily to keep an eye on the trichomes and can definitely see a big difference. (Sorry, pictures are crap - don’t have enough hands to get a good one!) Still watering with plain water but they’re taking a lot less and only been watered every 4 days or so. Sticky orange has lots of cloudy trichomes and starting to get a few Amber. Her leaves are drying off so she is getting harvested before the weekend. Purple skunk is a bit behind so I think I will wait and see how she goes for another week or so. I always thought she’d be the one to finish first too. I think I will be drying in the garage. We are consistently getting 18 degrees outside now but with the temperature drops at night, I am not sure whether to bring the buds inside overnight. I’ll be drying in a hanging ‘herb’ dryer and I have my curing jars all labelled and ready to go. Thinking of wet trimming roughly then going in for a final dry trim later once dry to neaten them up. Drying advice welcome! I did think I’d have to harvest in stages and chop the lower buds later on. But even the bottom buds look like they’ve caught up this week. I have honestly enjoyed every second of this grow and I’m almost disappointed it’s nearly finished. But at the same time, I can not wait to see (and taste) the final result!
Likes
51
Share
Well, it was my first diary here, and I'm really happy to had found this amazing community that is so eager to help! It gave me the opportunity to win the first giveaway in my life 😂 And it was from RQS! These seeds are in my new grow diary, and I really thankful for all the gift received! A special thank to Pol from the RQS staff! A special thanks to everyone who watched me grow here, and I hope to contribute with the community more and more!
Processing
Likes
17
Share
@kcartel
Follow
good flowering, everything is stable, a lot of inflorescences appeared this week, next week it is planned to remove the lower leaves. We had to tilt two branches from the middle, as they stretched out very much and there was a risk of burn, we are waiting for 7 weeks!
Likes
13
Share
@knicko
Follow
Jetzt sieht man deutlich das die Ladys sich auf die Blüten Produktion konzentrieren nächste Woche werden sie nochmal etwas entlaubt. Dazu haben die einen ordentlichen Stretch hingelegt bin beeindruckt bis jetzt sind zum gluck auch keine Probleme aufgetreten bin sehr zufrieden mit der Sorte bis jetzt.
Likes
12
Share
@Kinghaze
Follow
This was the last week I will give them 3 more days to finish Then i will try to dry them for minimal 1 week .
Likes
15
Share
Week 15 in 2 days(Day 41 today Saturday June 18, 2022 @11pm) Running a high ppm for entire grow so last 2 -3 week dropping to zero(0) ppm to drain plant real good
Likes
3
Share
@Crop_Top
Follow
It was time to switch over to the DWC setup and really get things going! I set the levels for the equipment with the AI controller (fan, lights, humidifier) and hung the EVO6 light around 18” from the canopy keeping LEDs at 45% on a 18/6 cycle. Using 15 Gallons of RO water to fill the bin just under the net pots I also started to add the @athena_official nutrients. They sent me samples to test out the blended line and will be using the recommended measurements throughout the grow. Starting out I will be using Grow A&B, Cal Mag, and cleanse in the recommended dose. Waiting on my @ACINFINITY_INC Hydro Sensor to get in so until then im stuck using my trusty Amazon stick testers 🤣 RO Water ph: 5.8 PPM: 375 EC: 0.85 Water Temp - 68*F Air Temp - 74 (Lights On) 68 Lights Off Humidity - 60% on average Roots started to come through the net pots towards the end of week 3. ** Added 3mL/Gallon of CalMag in the middle of the week as plants started getting a few spots and turning a pale shade of green. Trying to get things dialed with the nutrients the first few days.
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds keep coming along and frosty, but not really bump for the moment just a bit on the end week. 💪 Not too much work, just removed some leaves. 💧 Give water each 2/3 day 1.5 l Water + Roots + Bloom 1.5 l Water + Roots + Ez plus 1.5 l Water + Roots + Bloom + Sugar Royal PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 46 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html
Likes
25
Share
Vamos familia, actualizamos la tercera semana de vida de estas Runtz de Seedstockers. Lo primero es que esta semana ya realice el trasplante a macetas definitivas, de 7 L Temperatura par de grados por encima pero tampoco habrá problemas la humedad está en su punto. Añado ya el crecimiento de Agrobeta, blue line A , y seguimos con el flash root. También añadimos Gold joker y tucán de Agrobeta. Veremos como avanza esta semana. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
59
Share
@AsNoriu
Follow
Day 59. She starts to stink or smell ;))))) I have flue, getting a bit better and still could smell her today, means she stinks ;))) That's good, bad that it's air, except top bud - rest is worthless ;))) I am starting to doubt that I'll beat 1g/W , need to do around 15 ;))) All looks closer to 5 .... She has time till 24th , then I go for holiday and I chop her ... 150ml 6.3 water in ! Happy Growing !!!
Likes
5
Share
Stiamo arrivando al termine la pianta sta super bene
Likes
8
Share
This week everything remains stable with no significant changes. The plant continues developing well, so I’m just maintaining the current conditions and letting her do her thing 🌸💪
Likes
9
Share
DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
19
Share
Buds are starting to really stack up and forming really nice colas. thought they were gonna stretch a lil more but it looks like they've stopped. Was gonna add a scrod net but it doesn't look like I'm gunna have to.👍
Likes
36
Share
@Salokin
Follow
Hi Growmies, She has been topped and growing nicely, and slowly starts stretching through the ScrOG. The plant has not shown any signs of stress after the topping. I will let her fill the net to 60% and then flip her. I unfortunately snapped a branch, which I right away taped and it seems like it’s going to survive with just a little stunt in growth of that particular branch. Have already removed a few of the lower side branches and Will start with a light defoliation this week. From my experience it shocks the plant less than doing big batches at once. Roots have started to grow in the tank, which means that another growth spurt is to be expected soon. Thanks for ready and apologies for the delay. Merry Christmas :)
Likes
2
Share
End of the first few days of the transition. They all got a significant defoliation to open up space in the canopy for branching and the plants responded incredibly well to it. Plants 1&2 started to show immediate deficiency signs after defoliation and I upped the nute ratios by about 50%/liter with the Berkana. Voracious feeder and growers these are for sure. That said, their growth rate is phenomenal and the side branching is especially impressive and responsive to training. Veg. Maturity on all of em for the last week so it’s a fast growing strain all around👌. Well throw down the scrog net in a couple of days after we hack out the lower portions of each plant and take clones for all of em but the runt (#8). The clones will be flowered fast in the aeroponic cloner and pollinated for F3 generation seed. Bud characteristics on this run will then determine which clones get tested first based on best characteristics of the lot. So far this run has been incredibly impressive but only the bud quality will tell the true tale. Here’s hoping for continued good progress. ***Grow notes: stretching at about 1/2” per day over the last 3 days of transition. Side branching reaching enough maturity to start taking cuts. Minor deficiency signs post-defol. So increasing nute ratios on a slightly accelerated basis continues to be the norm.
Likes
13
Share
Strong growth she stopped for a day my cat dug in the pot then boomed taller then the rest (thus lst clip test ) lights are up to 36 inches I wanna get them like 3 or 5 more inches trying for compact plants but not to compact lol the purple punch buds were unearthly dense using my normal nites and set up trying to replicate here fast buds sponser me with beans lol u wont regret it