Sanlight EVO 3-60 at 80% Day 1: Here she is🤗 looking good and 🌊Watered with rain water Day 2 : keeping the soil moist 👍🏻 Day 5: nothing to report: keeping the soil moist 🌧️

Wish I could have vegged the clones another couple of weeks but the Zkitzo was just growing to fast. In hindsight shouldn’t have put a plant from seed in with the clones. Seeds always grow like mad in NFT and clones are more manageable as they don’t have a tap root. Still got some absolutely beautiful looking and smelling bud from the Zkitzo so can’t really regret it. The Gelatos are rock solid right through and look absolutely beautiful. Used rainwater right the way through on this so should smoke nice to. Better pictures as it dries.

I'm pretty much on auto pilot at this point.. im still just feeding compost extracts to keep it simple. There's a couple things I want to point out this week; I've also included a video of my cheese auto and no extra cost to the reader 😅🤣 PROCESS/ENVIRONMENT CHANGES - I've lowered the temp inside my tent a little bit to help keep my VFD between a good range for flower (1.0 - 1.5). I also changed the RH on my humidity controller when the temperature goes down after the lights go off. It's kind of a hassle but it's the only way I can stay in the range I'm looking for. - I've started to raise the pH of my water slowly... I want it to be between 6.6. And 6.8 at this point. - I've increase all my lights.. my Sf4000 is at 85% intensity and both my Ts1000s are sitting at around 75% intensity. - I've increased all my fans running. My intake is maxed out, my exhaust is on '6' and my fans inside my tent are all maxed out.. the cheese auto is drowning my entire house out hahaha its crazy. -I've cut off a whole bunch of fan leaves, larf, bottom branches and a bunch of other unwanted stuff.. I'm hoping that she thickens up fairly like some of her sister's in the tent 🤞 cutting off all the unwanted junk might help at least move more air at the bottom of the canopy.. at most it will help direct energy to other parts of the plant therefore producing a better flower. If she does fill out I'll have to support her side branches so they don't fall over. - Every day I rotate the plants in my tent so that the get to experience the light in different ways. Add me on IG for more updates @Wrongholn519

Cut the Gro out and got placed in the 5x5.

Its finally done! So on the next days buds will continue to dry regularly in their jars. The total weight of the two wedding cake was (82g)..on the next few weeks I will continue to check their weight, while the total weight of their trim was 34.1g which i will use them asap in order to wash some hash. I did some tests with some small buds to feel the flavors and get an idea of what I would expect.. I was struck by how different the two wedding cakes are. with both the smell and the look of the buds. I will post other updates with photos in the coming days! Thanks fam for the support! 💚

3.4. - Watered 💧 6.4. - Watered 💧 also flushed all Banana Purple Punch. 3.4. - 9.4.2025

4 Purple Push Pops PPP (grew 2023 outside)2 Black Cherry Gelato BCG (love to smoke it, first time growing) Clones- from my clone guy 1000w LED, 4G Autopots,, coco/perlite 65/35, GH 3-part+ flourolicious, calimagic, SI, chelated iron, and humic acid , RO water, AC pro Controller and T8, 5x5 GG Tent with extension Garage grow SoCal This week I was out of town and let my grow grow. The autopots did their thing at about .6g a day. I did battle multiple hot days in the garage. We’re running just under 1000ppm with no issues. I ran out of bloom and used some powdered kool bloom and it worked well. Thinking of switching to jacks RO but it’s working so good now I don’t want to switch. This weeks accomplishments: install two more autopots - for the gelatos. I put the gelatos in fabric autopots, one 5g xl and one 15g xxl. Scrogging the gelatos to flatten the canpoy Long term issues Cooling and VPD targets during heat waves Preventing pest and mold issues - my humidity crept up high when I was gone and I saw a few powder leaves which were promptly removed upon my return. I had to take my fiancé to a swanky resort for a few days. I hope you all are having as much fun as I am. Best of luck gromies. Check out my black cherry gelato grow. Soon I’ll be posting my outdoor light dep grow - side by side with my indoor grow- same clone batch. This should be a great comparison of indoor versus outdoor grows side by side 👍

Day 14 After a week from the bottom feed The pots feels light again My finger was dry So i think its time for they first halve dose feed 23c, Ppm 700, ph 6,25 Gave each a dose of 100ml water Day 16 Last night I saw roots so today I transplanted Wich didn't really went as plant because something (Hopefully only soil) dropped right before I placed "Jane" into her new home :( Besides that it went okay Gave them a good dose of water Now wait till it dries and then they get their first full feed dose Day 20 This night they got they first full feed 500ml each 4ml grow A&B 4ml b52, bud candy and voodoo With a low ph to bring down the ph in soil Wich is a lil high I qeuss 22,7c 1000ppm 5,8 ph Day 21 Today we did some LST Now they lay, next up is sit and then we roll So far they are cooperating Day 22 All are now bend and secured and doing well :D Day 23 Soil was dry gave them some calmag 1ml/l each 700ml 6.10ph

Firstly we've place the seeds in water for 72 hours. Then place in Jiffy pods, then placed in a mini hothouse under 2x 28watt halogen bulbs until day 14. Then they'll be placed in large 16-20 litre pot, then placed in the greenhouse to live out their life. Day 2. Gelato Auto have been planted in the jiffy pod. Day 3. Auto Ultimate and Gorilla Glue Auto have been planted in the Jiffy pods. Day 4. Halogen lights too hot, so now they are in the bathroom under one of the ceiling heat light. It's perfect, the humidity ranges around 78 - 83% and the temperature ranges between 18.2 to 21.8 degrees over the 24 hr period Day 6. The Gelato Auto has sprouted along with 6/7 Auto Ultimate. Leaving one more to come plus the Auto Gorilla Glue. Auto Gorilla glue and Auto Gelato were free seeds with the Auto Ultimate. So they'll becoming along for the ride. Day 7. All of the Auto Ultimate have sprouted, leaving just the Gorilla Glue Auto to come. It's has a tap root, it just hasn't escaped from the seed yet Day 9. 5 Auto Ultimate have been planted into 16 litre buckets and placed under 200watt HPS bulb 18/6. The rest will be planted on day 11. Day 10. Gorilla Glue is gone. When you see a seed case that won't fully open with a very small tap root. It's either delicately remove the case and membrane and hope it'll do something. If you break it, waste of time. If you don't, waste of nutrients and soil on a maybe so opted to say good bye. It's a free seed so no loss. Plant the Auto Gelato and the two Auto Ultimate tomorrow morning. Day 11. 2 Auto Ultimate and the Gelato Auto have been planted outside in the hot house. The other 5 will join in week three of growth. It's said to grow then under lights for the first three weeks. So we will the difference between starting outdoor and starting indoor. This is my comparison Grow. Day 12. Hot house has built-in misting system to help with it humidity levels. I do a feed once a week with fish fertilizer. Soil mixed with dynamic lifter & slow release fertilizer pellets. Mist will go off at 9am, 2 pm and 930pm. More often or less weather permitting. Hot house open during the day and closed in the afternoon and throughout the night. All is doing well in the hothouse. The 5 Auto Ultimate indoors are doing great as well. So far so good. Day 14. Germination period has ended. We only lost the Gorilla Glue Auto. When the 5 indoor ones reach three weeks they will join the others outside, to complete. MH light now set at 400watt

The girl is fantastic :) she looks strong, healthy and happy :) next week, I will defoliate her to give energy to the flowers, and at the same time improve air circulation closer to the stem :) everything is going smoothly and well :).

Mendo Frost is looking very promising now and is definitely living up to her name. Bud stacking has accelerated noticeably, with multiple sites already showing excellent frost production and strong flower development. I performed a moderate defoliation this week to improve light penetration and airflow through the canopy. At this point the structure is set, the plant is healthy, and the focus shifts to letting the buds bulk up over the coming weeks.

Hey guys Everything going good, one Zake and one Shimo (in the front) have pretty much no stretch 😓 Beside that, everything going good, the ChemZu's are so Big 😍

the chosen bell is well and this week I think it has settled into its new vase, even if this week the only one was not the best she is well, the same and the heads have settled and turned well and I hope that they all grow evenly and by doing so I think I will start managing her future height because being hemp sativa l./industrial hemp despite having been selected she will be ta

Really healthy plants :) looking like they’re starting to bulk up. Started to add more nutrients towards the end of this week

Day 63 veg last day of veg going to.give plants a 36hour dark period before the flick some leafs are still looking slightly yellow super cropped few of the longer branches to.help maintainneven canopy when going 12/12 lights are on 600w settings to get it ready for.flowering

😍😍😍

Er desværre ikke gået som jeg havde håbet, den ene døde desværre men det er så , amnisi-lemon k. Der overlever, og som jeg faktisk ikke har fået nogen dagbøger gennem ført på endnu, Så nu har jeg chancen. Jeg afventer 200liter Biobizz Light mix jord, så bliver hun plantet i en 18 liters potte, og kommer til resten af KANNABIA familien uden for, hun ser lidt sjov ud;) men hun er også super flot og se 👀 på 🧡🖤🤩💚

### Day 22 ### Jeej, the last week of vege! She looks to respond pretty well to the LST, I see nice new growth everywhere. She is also very dence as shown in the video up above. I hope she will get a mayor stretch when starting to flower. I'm already very proud of how this little plant is turning out. 😁🌱 Also ordered some biobizz top max and bio heaven to boost flowering when it happens. ### Day 23 ### Decided to add more LST, a lot more LST (like 7 wires extra in addition to the 2 initial ones)! 😂 Was a little hard because of the density, but it worked out. I think only one budsight does not have access to direct light. I just could not get it in the right place, oh well, there looks to be enough others 😋. Hope she is not stressed too much, some of the bends are pretty hard, but she is still flexible. After reviewing the photos again I realized that I'm growing her in kind of a spiral. ### Day 24 ### Started the day by tucking the bigger leafs underneath the small ones who need more light. She looks happier now! Also watered her 0.6l with nutrients, the soil was becoming pretty dry and it was 3 days ago since her last watering. ### Day 25 ### Pretty uneventful day. She is still liking the LST, like a lot! Readjusted the LST and tucked the bigger leaves under. There is only one part of new growth I'm concerned about! It is in the middle of the top view picture, so it is from a few nodes before, but looks terrible in comparison to the rest of the plant. Like it was eaten by something. Hopefully she will rebound from this. ### Day 26 ### I put some cardboard in a V shape in front of the intake fan to defuse the airflow more. Now the new growth that had problems yesterday looks a little better, the brown red-ish is fading away. Windburn is a real thing apparently 😲 Did a lot of LST again today, trying to stay ahead of the growth. ### Day 28 ### The last day of week 4. Did some more heavy LST to make sure all potential budsights get enough light. The growth that was struggling a few days ago is doing a lot better and seems to be recovering.

So far it seems to be fine even if the high humidity worries me even if the temperatures are still high then they have stopped growing and will finally focus on the flowers and slowly we recover these small deficiencies