Likes
Comments
Share
HAPPY 420 Today iam entering the SEEDSMAN 420 Growoff with the Following strain the FATSO GMO f1 automatic. All will start Indoors under SANlight Flex 25, and move Outdoors. Only one Plant stays indoors, to see the performance under best Conditions because my Outdoor Garden is hard^^ So i started with letting them soak, and then the seeds will move under a humid Kitchensponge unil i see a sweet Taproot. then they will go into the Final Pot, filled with lovely TerraPreta mj mix the grow will be supported with Biotabs fertiliser Breeder Information Fatso GMO F1 Auto is a feminised hybrid strain that is the result of crossing two autoflowering strains, viz. Fatso Auto and Cotton Candy Auto. This Cali-derived, slightly sativa-leaning, easy to cultivate strain will please growers with its big yield, solid THC content and its sweet, candy and fuel palate. Fatso GMO F1 Auto will grow well both indoors and outdoors. It has an above-average resistance to mould but will still benefit from good ventilation, especially where humidity levels are quite high. Resistance to plant pests and other pathogens is excellent. While plants will remain quite short at around 100cm or less indoors, they can grow a little taller, reaching a height of 130cm, outdoors in open ground. The entire cycle is completed in a maximum of 75 days from germination through to harvest and although yields are said to be average this is still pretty impressive for an autoflowering strain. The combination of high resin production and high terpene levels make Fatso GMO F1 Auto a very good strain from which to make cannabis extracts. The terpene profile is sweet and funky with savoury scents of Skunk with pine and floral notes. The taste is like sweet candy with hints of fuel. THC production is high, reaching 24% while CBD is low. The effect is uplifting and well-balanced.
Likes
3
Share
Buds filling out rapidly. Had a near miss with accidental over-feeding this week. Burnt some leaves. Recovered quickly with a quick flush of the system, but may impact yield. Half a dozen leaves frazzled.
Likes
12
Share
The buds aren't very swollen, really the size of a golf ball 😋 But veeery dense and strong 💪👍 like nuts 😬
Likes
18
Share
F66 Humboldt Sour Diesel SD3 only the tops buds swoll. the rest of the main colas didnt fatten up. Maybe it was me or the genetics or just the light distribution? She doesnt smell as vibrant as at F50-55. I dont know if she was ready back then SD2 buds fattened up and since she showed signs of flowering a week later than SD2, it seems she is ready for harvest now as the she smells more vibrant right now at F66 I harvested Humboldt Sour Diesel at F68. SD2:137g wet 25dry SD3: 251g wet 48dry
Likes
10
Share
LSD Zamnesia Tripping 🙂 | Final Report — Cure, Smoke Review & Closing The Chapter Well… Here we are. The final chapter of this LSD journey. And honestly, after everything: * from seed, * to flower, * to harvest, * to drying, * to trimming, * to washing, * to temple balls, * to curing, * to finally sitting down peacefully and actually enjoying the medicine… …I can honestly say this run became something much bigger than just “growing weed.” This became a full experience. A full learning process. A full journey. And before diving into the smoke review itself, let’s do one final recap for everyone arriving here for the first time. These girls were grown under 12/12 from seed from the very beginning. No long vegetative stage. Very little training. Almost no aggressive manipulation. Mostly allowing the genetics to express themselves naturally while we simply guided the environment around them. And throughout the entire run, these plants surprised us constantly. Huge central flower development. Massive stacking. Incredible resin production. Beautiful terpene expression. And honestly… some very unexpected structure for indica-leaning genetics. This harvest was divided across several reports because there was simply too much happening to compress everything into one single update. We wanted to properly document: * harvest, * drying, * trimming, * curing, * fresh frozen preparation, * washing, * temple ball production, * extraction evolution, * and finally the smoke review itself. GrowDiaries limits the amount of files we can upload per update, so instead of rushing through everything quickly, we decided to slow down and explain the process properly week by week. And honestly? I’m very happy we did. Because now we can finally close this chapter understanding not only how these girls grew… …but how they evolved. And evolution is honestly the perfect word here. The flowers themselves cured for well over a month, some even approaching two months now. And during that time, the transformation became beautiful. The aroma deepened. The sharp greener notes disappeared. The smoke softened dramatically. And the terpene profile became something honestly very difficult to describe perfectly with words. To me personally? This smells like: * earthy sourness, * soft skunk, * herbal spice, * and a gentle diesel layer hiding underneath everything. Not aggressive diesel. Not overpowering fuel. More like an old-school soft diesel wrapped inside earthy sweetness and skunky herbal notes. And somehow… despite not being truly sweet… it still feels sweet. One of those terpene profiles that almost tricks your brain. The smoke itself became incredibly smooth. Very soft inhale. Very soft exhale. Dense smoke without becoming harsh. And one thing I really appreciated: the inhale and exhale remain surprisingly similar. Sometimes flowers smell incredible in the jar but lose complexity during combustion. This one did not. The flavor stays present throughout the entire experience. Now about the effects… Despite the name LSD, I personally would not describe this as psychedelic medicine. At least not in the “seeing colors and melting walls” kind of way 😄 To me, this is euphoric medicine. Social medicine. Happy medicine. The kind that: * makes conversations flow, * makes music feel warmer, * makes nature feel beautiful, * makes food taste amazing, * makes you laugh more, * makes you relax without disconnecting from yourself. This is the kind of medicine I would happily enjoy: * during a beach walk, * with friends at dinner, * during a peaceful afternoon, * listening to music, * creating art, * talking for hours, * or simply enjoying life slowly. Very balanced. Relaxing without becoming sedative. Strong without becoming overwhelming. And honestly? Very emotionally comfortable medicine. No paranoia. No anxiety. No mental heaviness. No unpleasant race. Just calm, warm, euphoric relaxation. A really beautiful balance. Now let’s talk about the extraction side of this run… Because these girls absolutely shined there too. And honestly? They washed beautifully. The fresh frozen material produced incredible resin quality and gave us one of the most satisfying parts of this entire journey. Everything regarding: * freezing, * washing, * ice water extraction, * collection, * freeze drying, * pressing, * temple ball formation, * and curing… was explained in detail in previous reports for anyone curious about the full process. But now that some curing time has passed… something magical started happening. The temple balls evolved. And this is where hash becomes truly fascinating. The hash you are seeing now looks completely different from the fresh temple balls shown previously because the compounds inside are evolving over time. And that evolution is natural. At first, freshly pressed hash is often: * smoother, * more uniform, * more elastic, * sometimes shinier. But during curing: * oils begin migrating, * terpene fractions separate and recombine, * cannabinoids continue evolving, * moisture stabilizes, * oxidation slowly changes color and texture, * crystalline structures begin appearing, * and the entire resin starts transforming internally. That sandy crystalline texture appearing inside the cured hash? That is part of the evolution process. And honestly… it is beautiful to observe. The hash almost begins looking alive. Changing week after week. Softening internally while crystallizing externally in some areas. Developing complexity. Developing depth. Developing personality. This is why traditional hash makers allow temple balls to age for months or even years. Good hash is not rushed. And the smoke? Absolutely beautiful. The small sample we opened after roughly 15–20 days of curing already showed: * full melt behavior, * deep flavor, * rich oily smoke, * long-lasting taste, * and incredibly smooth combustion. The rest now remains vacuum sealed for long-term aging. And honestly? I cannot wait to revisit it months from now. Final dry flower numbers for the LSD girls: * 287g dry flower * 107.3g dry flower Final total: 🌱 394.3 grams dry flower And that does not even include: * the fresh frozen extraction material, * temple balls, * finger hash, * trim-bin collection, * or future cured resin evolution. For a 12/12-from-seed run with minimal intervention… I’m honestly very happy with these results. We also have to talk about Grove Bags for a moment because they genuinely made curing extremely easy and consistent during this process. For anyone unfamiliar: Grove Bags are designed to help stabilize humidity exchange naturally while reducing the need for constant burping and jar management. Do they replace proper drying? Absolutely not. Nothing replaces a proper dry. But once the flowers are dried correctly, they help maintain an incredibly stable curing environment with much less stress and handling. And honestly? For larger harvests especially, they become incredibly practical. Now… before closing this chapter completely… Thank you. To Zamnesia for the genetics, the Bubbleator, the support, and the trust. To Plagron. To F.O.G. To the LEDs. To Grove Bags. To the gear involved. To GrowDiaries. To the entire community. To the longtime followers and OGs. To the new curious visitors. To the supporters. To the skeptics. To the silent viewers. To the people who stayed since the beginning. To the people who discovered this journey halfway through. To the lovers. And yes… even the haters 😄 If someone spent even a few moments here sharing this experience with us, then they deserve gratitude too. And of course… special thanks to Mr. Baggy for staying with us through every single stage of the madness 😄 From trimming sessions… to washing… to temple balls… to studio chaos… to hash curing… the fluffy supervisor never abandoned his post. And even though this chapter closes here… the journey itself continues. We may return months from now to revisit the cured hash evolution and see how time transforms it further. And meanwhile? New runs are already beginning. New genetics. New experiments. New lessons. New mistakes. New beautiful moments. So if anyone enjoyed this journey… You are always welcome here. Wishing everyone: healthy plants, peaceful minds, sticky fingers, beautiful medicine, great friends, slow sunsets, and curiosity enough to keep learning 🌱 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
19
Share
@Zonnetje
Follow
Plants are looking good. Hope they get a little thiccer.
Likes
3
Share
This is my first grow I have haze berry critical and northern lights and white widow automatic the baby’s are critical mush and the 2 seedlings are white widow all from RQS can people give me some useful tips and vote for me
Likes
172
Share
Laughing Buddha – Woche 22 | Blütewoche 7 Diese Woche stand ganz klar unter dem Motto: Zurück zu den Wurzeln – beziehungsweise zurück zu Hesi. 😅 Nachdem sich die Probleme mit dem Green House Feeding inzwischen lange genug durch den Grow gezogen haben und ich bei meinen Autos ein sehr ähnliches Bild gesehen habe, ist für mich die Sache mittlerweile ziemlich eindeutig. Unter meinen Bedingungen scheint das Zeug einfach nicht schnell genug verfügbar zu werden. Die Buddha hat zwar ordentlich Futter im Topf, aber offenbar nicht dann, wenn sie es braucht. Für mich war damit endgültig Schluss mit dem Experiment – Hesi kommt zurück ins Spiel. Beim Gießen war zuletzt durch unsere Renovierung außerdem etwas der Rhythmus durcheinander geraten. Eigentlich hatte ich den 45 Liter-Topf mit täglich etwa 5–6 Litern ziemlich gut im Griff. Diese Woche bekam sie dann wieder eine ordentliche Ladung und der Bodensensor zeigte schön, wie sich das Wasser anschließend im Topf verteilt hat. Direkt nach dem Gießen war die obere Zone erwartungsgemäß deutlich feuchter, einige Stunden später hatte sich das Ganze wesentlich gleichmäßiger nach unten verteilt. Auch der gemessene EC im Substrat ist nach der Hesi-Gabe etwas angestiegen – genau das wollte ich erstmal sehen. Und trotz des ziemlich mitgenommenen Blattkleids macht die Buddha einfach weiter. 😅 Von oben sieht das Dach inzwischen zwar ziemlich hell aus und gerade weiter unten verabschiedet sich einiges an Laub, aber die Blüten erzählen eine ganz andere Geschichte. Die Colas legen sichtbar weiter zu. Mittlerweile stehen über die komplette Fläche unzählige kleine und größere Türme, viele davon schön kompakt und ordentlich mit Harz überzogen. Gerade aus niedriger Perspektive sieht man inzwischen richtig gut, wie weit die Buds teilweise am Trieb herunterreichen. Einige der größeren Colas entwickeln sich langsam zu richtig schönen Kloppern. 🤤 Was mich dabei momentan am meisten beruhigt: Die Pflanze wirkt trotz ihrer Vorgeschichte nicht so, als würde sie gerade zusammenbrechen. Die verbliebene Blattmasse arbeitet, die Buds entwickeln sich weiter und über das gesamte 120×120-Gerüst ist weiterhin ordentlich Leben vorhanden. Nach all dem Theater der vergangenen Wochen hätte das definitiv auch anders aussehen können. Damit ist meine Aufgabe für die nächsten Wochen eigentlich ziemlich simpel: Nicht mehr experimentieren. Bewässerung wieder sauber im Rhythmus halten, mit Hesi kontrolliert weiterfüttern und die Buddha möglichst störungsfrei ihren Job machen lassen. Denn auch wenn sie vielleicht keinen Schönheitspreis mehr für ihr Laub gewinnt – beim Blick zwischen die Netze wird langsam ziemlich deutlich, wofür die ganze Arbeit draufgegangen ist. 😅 Eine Pflanze. 45 Liter. 120×120 cm. Und mittlerweile ein verdammter kleiner Wald aus Buds. 🌳😎 Mal schauen, wie fett die Türmchen in den nächsten Wochen noch werden. 🤗
Likes
28
Share
Hi💚 Dope genetics, dope nutrients, dope equipment and a happy grower. The journey went well and I thank mother earth, Shakti, of cause ATAMI and Monkey genetics. The buds are already drying. Can't wait to test them... Peace and happy growing 💚 🍀 🌞 🖖🏽
Likes
12
Share
@AllieO
Follow
2/23: Saddest leaves ever, but still chugging along. 2/26: bud sites are still fattening up everyday. I'm officially down to one plant!
Likes
4
Share
@A-C-H
Follow
Um ehrlich zu sein, ist das eine tolle Entdeckung: Diese Sorte ist wunderschön, duftet herrlich und ich habe sie noch nicht einmal probiert
Likes
16
Share
@BLAZED
Follow
Week 8 (17-3 to 23-3) 17-3 Temps: 16.9 to 21.4 degrees Humidity: 57% to 70% 18-3 Temps: 16.6 to 21.1 degrees Humidity: 56% to 69% 19-3 Temps: 17.1 to 21.9 degrees Humidity: 54% to 64% Watering: 1100 ml. (Only Calcium added) 20-3 Temps: 17.7 to 23.1 degrees Humidity: 52% to 69% Watering: 1000 ml. 21-3 Temps: 18.1 to 22.8 degrees Humidity: 52% to 66% Watering: 1000 ml. 22-3 Temps: 18.8 to 23.2 degrees Humidity: 55% to 70% Set the strength of the light from 45% to 50% 23-3 Temps: 19 to 24.2 degrees Humidity: 57% to 71%
Likes
22
Share
Flowering day 30 since time change to 12 / 12 h Hey guys :-) Every day when I look into the tent, the sight and the smell are a dream 💚. They are all developing very well. There is no tip of the leaf that looks funny at the bottom or at the top 😃. They were watered every 2 days with 1.3 l each (nutrients see table above). They were all checked and checked for their health. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼
Likes
5
Share
@Vega0284
Follow
First day of week 6! Looks like what transplant shock I was afraid of never materialized so that's a plus. I did however discover 2 things that have been bothering me. The first was random discoloration and spotting on some leaves, I had no idea that it was due to me spilling watering nutrients on the leaves, so I dug a small canal around the main stem of the plant. Now I just pour water evenly around the canal. The second was, why is my plant so small. Most other Blue Dreams I've seen seem to get really tall and stretch upwards. Mines just seems to get bushier. After more and more research, and probably one of the most obvious things to more experienced growers, is that it's not stretching so much because it doesn't need to. So at least my light is on point. I watered regularly today for the first time since transplant, but only used a quarter of a gallon.
Likes
4
Share
Day 15: Watermelon Zkittlez is looking strong. A little discolored but it is early growth and should work itself out. Kind of resembles watermelon rind to me which is quite the coincidence I think. First big feed: 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 2ml CALiMAgic, 1ml RapidStart, 1ml Floralicious Plus and 2.5ml Armor Si. RO water PH 6.0 Temp: 75º RH: 63% PPFD: 450 VPD: .53 kPa Day 16: She's looking about the same with some new leaf growth. I can't tell if she just has funky pigment in her leaves or if there is a deficiency going on. Her leaves look just like watermelon rind! Kind of weird but also maybe genetics. Will leave for now with no adjustments to nutes and see if new growth changes. No water no feed. Temp: 76º RH: 61% PPFD: 475 AVG VPD: .46 kPa Day 17: Happy, healthy, let grow! Applied first LST bend this morning. Should take nicely. Will feed tomorrow. Temp 77º RH: 55 % PPFD: 500 AVG VPD: .6kPa Day 18: Watermelon Zkittlez looks really funky. Something is going on with her but I'm not sure what exactly. There is clear pigmentation issues but again, why? Same nutes as all the other girls who all seem to be thriving. Can't figure it out unless it's genetic. Moved up and turned up the lights. Fed 250ml of 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 1ml RapidStart, 2.5ml ArmorSi, 2ml CALiMAGic and 1ml Floralicious in RO water PH 6.2 PPM: 750 Solution Temp: 69º. Tent Temp: 77º RH: 60% PPFD: 575 VPD: .44 kPa Day 19: Looking good. Tent Temp: 77º RH: 60% PPFD: 550 VPD: .44 kPa Day 20: Still looking good. New growth. Fed another 250ml RO water with 1ml RapidStart PH: 5.7 Tent Temp: 77º RH: 60% PPFD: 550 VPD: .44 kPa Day 21: End of Veg Week 3! Looking strong and healthy so far despite the extremely odd leaf colors. Close inspection shows some sort of deficiency or disease but all other ladies are receiving the same nutes in the same soil and grow conditions. All are very healthy. Has to be a genetic flaw in the bean. Will grow it out to see if it persists or corrects. Almost feeding/watering daily at this point, will up the solution volume and see if it will last a day or two longer. Fed 350ml-400ml of 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 1ml RapidStart, 2.5ml ArmorSi, 2ml CALiMAGic and 1ml Floralicious in RO water PH 6.2 PPM: 750 Solution Temp: 69º. Tent Temp: 77º RH: 60% PPFD: 500-550 AVG VPD: .44 kPa
Likes
14
Share
@BLAZED
Follow
Week 8 (20-3 to 26-3) 20-3 Temperature: 28.8 degrees (lights on) 20.9 degrees (lights off) Humidity: 62% (highest) 43% (lowest) 21-3 Temperature: 27.6 degrees (lights on) 20.8 degrees (lights off) Humidity: 62% (highest) 41% (lowest) Today i installed an humidifier, it will keep the tent at around 65% when it gets below 55% 22-3 Temperature: 28.2 degrees (lights on) 19.7 degrees (lights off) Humidity: 71% (highest) 45% (lowest) No pictures. 23-3 Temperature: 26.8 degrees (lights on) 19.7 degrees (lights off) Humidity: 64% (highest) 50% (lowest) Today i heavily defoliated the Chemdog #1 and #2 24-3 Temperature: 26.1 degrees (lights on) 18.5 degrees (lights off) Humidity: 68% (highest) 52% (lowest) Added 15L to the reservoir. 25-3 Temperature: 26.1 degrees (lights on) 19.1 degrees (lights off) Humidity: 79% (highest) 50% (lowest) No pictures. Today i switched to 12/12. 26-3 Temperature: 24.9 degrees (lights on) 18 degrees (lights off) Humidity: 66% (highest) 56% (lowest)
Likes
43
Share
@GrowerGaz
Follow
Slowly slowly catch monkey. Slow going as topped this week and they are now recovering well and the lower nodes are starting to catch up with the main tops.
Processing
Likes
6
Share
@AbbyRose
Follow
These chef anna white label autos are just amazing. The smell is so pungent it just smacks you in the face from 10 feet away. I cant wait to smoke these lovely ladys. Not to mention look at all those pistols.
Likes
Comments
Share