LST DONE TODAY NEARLY ALL OF THEM 2 JUST SEEM POINTLESS TO PULL AROUND BUT

Plants in Full flower

We picked up the cuttings for the GanjOS Lab from High4Life on December 30th and put them in our propagator for around 3 days for acclimatization.

This strain is mind blowing the smell and the oils it leaves everywhere it touches

144v Lux in tenebris lucet. Aristotle said "It is the mark of an educated mind to be able to entertain a thought without accepting it." Those who are able to refrain from judgement long enough to genuinely research and weigh the evidence from all sides of a given subject are those most likely to arrive at the truth. Those who instantly resort to knee-jerk ridicule and continue to believe whatever they were first taught are those most easily deceived. Very high light intensity can slow vertical growth. She just doesn't want to grow vertically any longer; once the flower is initiated, that goes right out the window. Apical dominance is shattered; you now have every single stem fighting for survival against each other, with none given particular precedence over another. That is some stretch for a week, explosion. Doesn't matter if they are crowded now; there is space up ahead, and plant perception will fill every inch of available space. The divine intelligence that drives plant growth is far more efficient than any canopy I could make or spread myself. No defoliation. Sometimes you just need to give her what she needs to fill the space herself. All I do is guide the initial framework into the desired outcome, keep everything else flowing and in optimal parameters. Fast-growing leaves to have a lighter green color, sometimes appearing almost yellowish-green, because they haven't had time to produce much chlorophyll yet. New leaves are soft and pale, but they will gradually darken and become a deeper green as they mature and are exposed to light. Every morning, new lime green, with the micros supercharged, may be immobilizing nitrogen in the medium, magnesium was creeping in earlier, so I'll try to hold the line and see what progresses. The ratio of sugar leaves to buds is determined by a combination of hormonal signaling, nutrient availability, and genetics. Sugar levels act as a key signaling molecule, with high sugar availability influencing hormones like auxins and cytokinins to promote bud outgrowth, while nutrient deficiencies can limit development. Specific genes also play a critical role in leaf and bud initiation, expansion, and the overall balance of growth. Buds are like balloons! Need lots of pressure to blow up lots of balloons! Sugar balloons! Plant transpiration and turgor pressure are crucial for bud development because turgor pressure provides the cell expansion needed for growth, while transpiration creates a "pull" that draws water and nutrients up through the plant to fuel this process. High turgor pressure is essential for cells to grow and expand, allowing buds to open and young leaves to unfurl. Transpiration maintains this necessary turgor by driving a continuous flow of water from the soil up to the leaves, where it evaporates. No holding back, this is it, 4-5 weeks of all-out war! What we develop now will be all we have for the final 4-5 weeks. The carbon to nitrogen (C:N) ratio indicates how much carbon is in a substance relative to its nitrogen, affecting nitrogen availability in soil through microbial activity. A high C:N ratio (like in straw or corn residue) requires soil microbes to use a significant amount of nitrogen for decomposition, temporarily tying it up and making it unavailable to plants. A low C:N ratio results in a more rapid release of nitrogen for plant use. The carbon-to-sulfur C:S ratio in plant residue determines whether soil microbes will immobilize or mineralize sulfur (S) during decomposition. This affects the availability of sulfate SO42, the primary form of S that plants can absorb. Mineralization is the process by which microbes decompose organic matter and release excess nutrients, like sulfate, into the soil in an inorganic, plant-available form. Immobilization is the reverse process, where microbes absorb inorganic sulfate from the soil to meet their own nutritional needs, making it unavailable to plants. Glucose typically uses more oxygen than sucrose in a medium because it can be metabolized more directly, while sucrose must first be broken down into glucose and fructose, which can involve additional energy costs and a slower overall process. However, the efficiency of oxygen use can vary depending on the specific organism and conditions, as some bacteria, for instance, can use sucrose for a growth advantage under certain circumstances by producing exopolysaccharides that are more efficient at oxygen extrusion. Why glucose is generally more oxygen-efficient: •Glucose is a monosaccharide and can be used directly by many organisms in cellular respiration. •It does not require an initial enzymatic step to break it down before entering the metabolic pathway, unlike sucrose. •Due to its direct use, glucose can lead to a faster rate of oxygen consumption and carbon dioxide production in comparison to sucrose under typical aerobic conditions. Why sucrose might seem to use more oxygen in certain contexts: •When sucrose is metabolized, it is first broken down into glucose and fructose. This initial hydrolysis is an extra step that requires enzymes. •The fructose component is metabolized differently from glucose, and its specific metabolic pathway can affect the overall oxygen demand. •Some organisms may have regulatory mechanisms that lead to a higher initial oxygen demand when switching from glucose to sucrose, especially if the organisms have specific metabolic pathways that are optimized for sucrose. •While glucose may be used faster, sucrose might provide a growth advantage under certain oxygen-limited conditions due to the specific metabolic pathways and products it can generate. Seems my initial concept of sucrose was inaccurate. Really need to study up on all of this in the coming months. Take care. 9 To get the closest possible NPK ratio of 1-3-2 in 5 gallons of water: Add 2 tsp of the 7-4-5 Grow fertilizer Add 3 tsp of the 3-12-12 Bloom fertilizer Calcium can interact negatively with phosphorus and sulfur, add your Cal-Mag supplement to the water first if needed.

Día 27 (20/05) Riego con 250 ml de Té de Compost Día 28 (21/05) Vuelven a tener sed! Las riego con 250 ml sólo H20 pH 6.2 Día 29 (22/05) Riego con 750 ml H2O+ Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 Día 30 (23/05) Banana Purple Punch Auto está sedienta de nuevo! 500 ml de sólo H2O con el pH 6.3 Día 31 (24/05) Banana Purple Punch Auto está sedienta de nuevo! Riego con 750 ml H2O + Regulator 0,15 ml/l + TopBooster 0,2 ml/l- pH 6.2 Día 32 (25/05) Las plantas no paran de crecer! 😍 Día 33 (26/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 Banana Purple Punch Auto está creciendo unas ramas laterales impresionantes 😍😍😍 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Not an overly impressive strain and I would say she was not that hard to grow. If I even grew this one again I would let it go naturally with some LST. Wanted more grape flavours but they don't really come through in the smoke. There's a bit of a sharp fruity smell that's sort of piney with a hint of fuel at the end. The smoke is not too flavourful in my opinion but that just means I didn't grow it well. Super tight nugs so be careful with humidity as stated above. Also she's a bit of a light feeder so be careful with your nutes. As you can see I burnt her tips and over fed her a lot. Not a bad yield though! I've only really smoked the lowers on this one so far so that gave me a bit of a racey high, just slightly racey. I would accredit that to the lowers not being mature enough at chop. The plant is super dense and since I mainlined it the lowers didn't receive enough light. I tried to let the lowers mature more but the plant stopped maturing when I chopped the tops, this caused stress and the plant just shut down basically. Not sure if I would grow Blimburn's GDP again until I grow the real GDP.

28.01. Day 3 Just relax and get an eye on the vpd! In my case looking for 0,6. But temp. Is very cold with 19 degrees —————————————————————— 30.01. Day 5 Same —————————————————————

Thursday this week has been good so far, I pulled each plant out yesterday and tidied everything up. I got rid of all the tiny lateral branches that didn’t make the cut and I got Rid of everything that was below about half way down the plant. Obviously the lateral branches that grew to the same height as the canopy are staying it’s just all the non starter stuff below. I annoyingly had my in take fan die on me. We’ll sort of, it just keeps tripping the fuse on my electric so I assume it’s from when I had my res flood onto the floor - I forgot it was there on the floor because it was hidden behind the res

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Gorilla Jealousy F1 is growing good. I had a little issue with the light not strong enough, and she got a bit top heavy. That is fixed now, and she has gotten a lot stronger. I did top her today and removed the first node growth. She is ready to go for another week. Thank you Seedsman, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

She's looking very healthy and strong so far, although she had to handle a little fungus gnats infestation which has been completely errdadicated thanks to the treatment with nematodes this lady is starting to get into the shape I want for her. Let's see what we can do!

Das Fimmen hat wie erwünscht sein Ergebnis gezeigt. Habe bis auf die untersten 2 Arme, alle erneut gefimmt. Das Gewächshaus 12m2 soll in den nächsten 10 Tagen ankommen. Die Damen werden dann Anfang Juli ins Gewächshaus wandern und Ende Juli mit einer Plane ab 17/18 Uhr abends abgedeckt um die Blüte frühzeitig einzuleiten. Happy growing;)

Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Flowering Day 56: Howdy Growmies. Hope we are all growing abundant crops with hits like a mule. It is finally the final week for ripening on the #1 and #2 Mango creams. Both plants have started to show some amber trichromes under the microscope but only in very singular points at present. They will be fed with plain water in a few days time as they were fed their final feed of the shogun Dragon force yesterday. The week has been a great example of ripening with the majority of the pearly white pistils starting to go orange initially now turning a burnt orange colour. They both have a few white one still to turn and even a few newly released ones around so i think it will be a few more days at least #1 is a fair sized budded girl and her lowers are going to be a positive addition with no real larf to worry about.I did leave a fair amount of her leaves for the flowering so expect trimming to be the usual sentence.lol #2 has been my masterpiece throughout the grow of these girls amd she continues to impress to the end it seems. She is a very big lady and even after I tried to fim her , she bounced back and created that huge main cola... The sides are doing just as well as the main is and they alone will yield well. She has done her breeders proud @exoticseeds #4 at day 49 looks ready to rock already just like the # 3 that harvested at day 39. Her trichs have Amber's around but still a few clear so I won't pull her too early . I am more sure she is the same Phenotype as the #4 now she is looking so ready. very different looking to the other 2 too. Now comes the patience again with watching the trichromes daily. .be safe growmies.

One of the ladies is still ill ... 🤷

SWISS DREAM ROSE 🌹 CBD AUTO ORGANIC GROW KANNABIA From seed to harvest this plant was easy to grow she didn't have any issues she made up for lack of height with dense buds down her stem her beautiful purple color offset by green leaves just looked amazing as she was finishing up. Thank you to KANNABIA as always for your great genetics and support!!! Thank you to FOOP!! I appreciate your support with this grow!!! FOOP is doing great things with your organic nutrients!! Thank you to the grow community who has committed, liked and viewed this diary!!

first day of the eighth week I think we are a bit late with the timing of fast buds but the scent is spectacular and the trichomes are more and more we hope that the flowers will also be dense and tasty

1-2-2022 A solution has been found and implemented. A simple quick project that cost little and not much time to make. Works very well. She is responding to her new environment and soon she will be into her new home in true Aeroponic spray only fashion. 😎