Buds are super frosty and sticky, smell like sour dog shit I couldn't ask for anything more my best grow yet

Intermediate Results Overview This grow was intense! Setting up the grow consumed so much of my time and focus that I started slacking at work, and it took me a month to get back on track. But hey, what’s the point of a job if it gets in the way of growing? 😉 In the end, everything worked out, and I gained invaluable experience. This was my first grow using coco coir. At first, I didn’t get it, but then it just clicked! Now I’m hooked: "I’m here to stay." Coco is more controlled than soil, flushes easily, and you can introduce beneficial microbes, which thrive in it. My main takeaway from this grow? If you buy coco, don’t forget CalMag! Next time, I’ll definitely install HEPA filters at the intake. The amount of dust was insane, and the grow box pulls air like a vacuum cleaner. Watching the timelapse, you can see the box sucking in every bit of dust. I vacuumed the intake filters weekly. The plant was incredibly sticky, but that also meant it caught a lot of lint and fibers between trichomes, especially visible under a microscope. Smoking microplastics? No, thank you! --- On CO2 CO2 only works if everything else is dialed in. If the plant experiences stress from deficiencies or overfeeding, you can forget about it. Since CO2 supplementation requires turning off the exhaust fan, it’s hard to manage temperature and humidity. The plant releases so much moisture that RH jumps to 80% within minutes. It’s doable, but definitely a challenge. --- On Magnetic Fields No clue what’s happening here yet, but it’s fascinating! I’ll test again with a control sample. --- Nutrients Dreams do come true—I’ve tested almost everything Advanced Nutrients offers. It wasn’t all smooth sailing; their feeding charts need adjustments for your conditions, and you usually need to feed less than recommended. Overall, I’d say the nutrients performed 100%, and I see no reason to switch. I’ll stick with them for future grows. --- Strain This strain is reliable, though not the most productive. It flowered exactly as advertised and delivered a frosty finish. It tolerated all my mistakes like a champ—especially mold. Despite an abandoned SCROG plan turning the plant into a bouquet, there wasn’t a single mold spot, even in the densely packed lower buds that got almost no light. Zero mold issues! --- Aroma As advertised: pine, wood, and citrus. At first, I thought it smelled like grapefruit, but now I’m leaning toward bergamot. Bergamot with a classic weed aroma—a recognizable twist on the usual scent. During the grow, the smell was strong, but the carbon filter handled it perfectly. --- Flavor It’s too early to say, but the flavor is definitely there! Embarrassingly, all my past harvests tasted the same—like nothing. Just smoke. This one has a distinct sour taste. I’m excited to see how it develops after curing. --- Effect Too early for a full review, but I love what I’ve tried so far. The high lasts about three hours, with euphoria and relaxation. It’s the perfect evening strain. I’ve smoked a lot over the years, but I’ve never experienced true euphoria—until now. Guess I’ve been stuck with garbage and ditch weed before. 😅 It’s not a strain for productivity or chores, but it’s perfect for chilling, watching something, or chatting. No anxiety, just great vibes. It feels like having a beer after a long day: you relax, and life feels good again. --- Roots The roots were healthy—maybe too healthy! While the AirPot (20L) prevented root circling, it didn’t eliminate it entirely. There were dead zones at the bottom where roots circled around the perimeter. A dense root mat formed at the bottom (so dense you couldn’t poke a finger through it), which likely contributed to salt buildup. Breaking through that mat required more water, and I suspect this caused EC to spike 1.5x the next day if there was no runoff. Next time, I’ll mix some pumice with the substrate at the bottom, about 3–4 cm deep. --- Timelapse I only got the timelapse running after the switch to flowering, so it’s not from the beginning. Still, it’s an incredibly useful tool for understanding growth rates. I’ll definitely use it for future grows. Comparing yesterday to today is one thing, but rewinding a week to see how things were is game-changing. I recommend it! You can even use an old phone with a timelapse app if your camera doesn’t support it by default. --- What’s Next I’ve grown fat buds before, but I’ve always neglected curing. This time, I’m doing it by the book with full control. Drying in the grow box with RH controlled at 50–60% (averaging 55%) for a slow, even dry. Temps are kept between 20–23°C, with frequent venting to keep it below 21°C for terpene preservation. After 7–10 days, when small stems snap with a characteristic sound, I’ll trim and jar them with humidity sensors. For the first two weeks, I’ll burp the jars twice daily, then reduce to once daily for the next two weeks. After that, I’ll monitor the RH sensors and adjust as needed. I’ll share the details after curing is complete. After drying, I’ll weigh the buds, take photos, and share another post in a month or two after curing to report on the flavor and aroma. For now, I’m taking a breather, fine-tuning my setup, and preparing for my next grow: Wizard Trees - Zangria S1.

Last week went well. She is coming along nicely. Starting to show hairs and is stretching now. I have been doing a lot of lst training and supercropping to make it as even as possible. Removed some fan leaves blocking bud sites. Doing that has made for a beautiful wide plant with a very even canopy. It should allow for even light/ energy uptake by the plant which should create a bunch of better, fuller buds. It altogether should increase the yield a decent amount. Pruning the bottom growth in the next week or so to concentrate energy towards the tops. Until next time happy growing to everyone!

16cm vertical growth this week, but she's bushed out a lot.

Update of Goofiez 2 of compound genetics!! On RDWC it’s literally super fast grow !! We are doing a pheno hunting of 12 plants and we seed 4 of them that are the best at the moment

I harvest these shiny buds 2 days ago. She ended in 109 days of life of that 59 in flowering. she grew with dark green leaves and tighten buds, I am pretty happy with the result. the smell is full of fruit and incense will update harvest again when buds gonna be dry

Der Samen kam aus der Erde, und damit er sich nicht streched hab ich das licht etwas herunter gelassen. Die Luftfeuchtigkeit war bei 35%, dass habe ich aber wieder im griff da ich eine Sprühflasche habe und eine Kuppel über den Setzling hatte. Bewässern brauch ich kaum da die Pflanzen wenig Wasser brauchen. Da die TS600 bei 60% Leistung nicht allzu heiß wird es ist aber auch Winter. Montag habe ich meine Spuckpalme dazu gestellt da die vielleicht etwas die Luftfeuchtigkeit reguliert ich hab keine Ahnung ob das stimmt ich wills auch nicht googlen wird schon funktionieren und wenn nicht sprühe ich sowieso regelmäßig mit einer Sprühflasche. Die Spuckpalme sah mir sowieso zu traurig am Fenster aus. Die Temperaturen waren am Wochenende im Zelt sehr hoch Sonntag Nacht hatte ich 5 Stunden lang circa 30°C-32°C. Trotzdem haben beide Pflanzen es super bestanden. Ich habe zum Umtopfen nächste woche einen 8L Topf, Mykorhiza und Wurmhumus gekauft. Dazu noch den Biobizz Indoor Dünger.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Let's go for the flowering, stretch Started, hope can stay under control, we can start to see the first pistils, Plant look happy. Weather start to be really cold, and worst next weeks, we'll see how turning. 💪 Keep Working on the canope, removing leaves and under buds site. 🕑 Now 12/1 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 43 cm. Mars Hydro Fan kit Setting 5 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/

This is my First Ever Grow, If you have ANY tips for me, please, don’t hesitate to leave me a comment.

So just been keeping an eye on the ph and ec staying pretty stable. Water temperature is good at 21.3c. ec .03 ppm 277

This girl got delayed in flowering due to the neighbors outdoor lights. Didn't start flowering and it was coming to the end of September (time for early harvest for some outdoor varieties), so I was worried. Almost quit on her all together since she was not kicking into flowering. As a last ditch effort to stress into flowering I cut about half of the branches off. That worked and she finally kicking in and started flowering as September ended. She slowly got into flowering and the developing flowers looked nice. I used Bloom booster and Sweet and sticky to enhance flavor and flower. Curious to see how the end flower comes out. Colas didn't get super fat but looks quality. Should get around 2.5 ounces Dry I would guess. For an outdoor plant that is not that good but all things considered I am happy! I am glad I found this site so I can more accurately log my grows, and I will only be growing seeds from seed banks now so I will have the legit strain and information beforehand. Will update this harvest full when initial hanging is done in 10 days and I jar it all up. Cheers and here is the next harvest 😎

HAPPY 420 Today iam entering the SEEDSMAN 420 Growoff with the Following strain the Tangerine Snow F1 Fast All will start Indoors under SANlight Flex 25, and move Outdoors. Only one Plant stays indoors, to see the performance under best Conditions because my Outdoor Garden is hard^^ As the strain is fast flowering i expect to end this Journey in the last weeks of September. Just before the " big Rain" starts So i started with letting them soak, and then the seeds will move under a humid Kitchensponge unil i see a sweet Taproot. then they will go into the Final Pot, filled with lovely TerraPreta mj mix the grow will be supported with Biotabs fertiliser BREEDER INFO Tangerine Snow F1 Fast Feminised is a 75% sativa, four-way cross of (Boost x Tangelo) with (Lavender x Power Plant). This Fast F1 hybrid is bred from Cali genetics and boasts great citrus terps, high resin production for extracts, high levels of THC, very good yields and excellent mould resistance. Tangerine Snow F1 Fast can be grown indoors as well as outdoors. Indoor flowering times are between 8 - 10 weeks while harvest time in northern latitudes is during September while in the southern hemisphere growers will be harvesting during March. Recommended climate regions are hot, dry, humid and warm. These are tall, semi-branched plants that grow in excess of 200cm and display a high degree of vigour with very good uniformity. In common with many other heavily sativa-dominant strains, Tangerine Snow F1 Fast offers excellent resistance to mould as well as to plant pests and diseases. The combination of citrus terps and plenty of resin makes thi a very good extract strain with the 'washing' method delivering very good yields of hash. The citrus terpene profile is reminiscent of mandarins and tangerines and also has sweet candy notes. THC production has been lab-verified at a strong 24% while CBD is low. The effect is uplifting and energising, perfect for use during the day and early evening.

Siamo arrivati intorno alla 4º settimana di fioritura e le mie signorine sono super attraenti! Green Sensation iniziato da poco e presto vedremo dei fiori super appiccicosi e pieni di resina profumatissima! Questa volta dopo 4 tentativi sono finalmente riuscito a caricare video da questo iPhone che ogni volta mi saltava per qualche motivo, poi ho capito che il 4k era un formato non adatto a Growdiaries e in HD le cose si sono risolte, con un po’ di pazienza si fa tutto, diceva qualcuno….bene! Ci vediamo presto per altri aggiornamenti su queste fantastiche Runtz

Just finishing week 4. Damn fungus gnats got me down. Laying some mosquito dunk water on them and expect / hope to have that eradicated soon. Going to do my second leaf stripping in first day or two and a second top dressing, which I do every two weeks up to week 5 or 6.

Best smoke I've had in years!!!!

It should be noted that with the current share of blue in the spectrum, the sprout does not stretch at all, I will probably adjust in favor of red in the coming days

Suffered from nute burn and tacoing which i think came from me having light too close and mixed ith high temps outside i think made it 1x worse, did flush and halved nutrients see how they react

So we're into week 4 of flower and she's really starting to gather pace now. She really healthy and putting out pistils all over the place. I'm just sitting back and letting her do her thing at this point.