Likes
Comments
Share
Eccoci qui... Tutto va per il meglio, questa settimana ho eseguito Lollipopping e Defoliation per far si che le cime principali sprigionino al meglio il loro vigore. Siamo verso la fine del progetto ora bisogna solo aspettare la fine... Grazie a tutti per il supporto🔥🌲❤️
Likes
19
Share
end of week 3 flower so far it’s stacking nicely packing on some trichomes still keeping a very close eye on these gals but so far so good hope it stay that way🌹🌹🌹
Likes
5
Share
🌿 **Green-O-Matic Grow Week 9 Update: Nearing Harvest Time!** 🌱 Greetings, fellow growers! It's time for an exciting update on the progress of our Green-O-Matic journey as we reach Week 9 of the grow cycle. With anticipation building and buds swelling, let's dive into the latest developments: 🌟 **Bountiful Bud Development**: At Week 9, our Green-O-Matic beauties are truly showing their potential, with buds swelling and resin production kicking into high gear. The once-small flowers have transformed into dense, frosty nuggets, promising a bountiful harvest in the near future. Trichome production is in full swing, indicating peak cannabinoid potency and aromatic complexity. 📏 **Final Stretch of Growth**: As we enter the final stretch of the flowering phase, our focus shifts to maximizing bud development while ensuring optimal ripening conditions. With careful attention to environmental factors such as temperature, humidity, and airflow, we aim to create the perfect microclimate for our plants to thrive and reach their full potential. 🍃 **Leaf Senescence and Nutrient Management**: As expected in the late flowering stage, some leaves may begin to exhibit signs of senescence as the plant reallocates energy towards bud production. This natural process is perfectly normal and serves as a signal that the plant is nearing maturity. Meanwhile, our nutrient management strategy remains vigilant, providing the essential elements needed to support robust flowering without risking nutrient imbalances or deficiencies. 🔍 **Monitoring Trichome Maturity**: With harvest on the horizon, we're keeping a close eye on trichome development to determine the optimal time for harvest. Using a jeweler's loupe or digital microscope, we inspect trichomes for signs of maturity, aiming for a mix of cloudy and amber trichomes to achieve the desired balance of THC and CBD levels, as well as flavor and aroma profiles. 🌞 **Preparing for Harvest**: As we prepare for harvest day, our checklist includes gathering supplies such as trimming shears, drying racks, and storage containers, as well as ensuring a clean and sanitized workspace to maintain the integrity of our precious buds. Proper post-harvest care and curing techniques will be employed to preserve terpene profiles and enhance overall quality. In conclusion, Week 9 marks a pivotal moment in our Green-O-Matic grow journey, where patience and precision culminate in the imminent harvest of our prized buds. Stay tuned for the next update as we celebrate the culmination of months of dedicated cultivation with a bounty of premium-grade cannabis ready to be enjoyed and shared. Happy growing! 🌿✨ 🚫 **Addendum: Phenotype Bin Update** 🌱 In the spirit of transparency and continuous improvement, it's important to note that we've made the decision to bin one out of the three phenotypes due to poor development. Despite our best efforts and meticulous care, this particular phenotype failed to thrive and did not meet our quality standards. While it's always disappointing to part ways with a plant, this decision ensures that our resources and attention remain focused on nurturing the strongest and healthiest phenotypes to their fullest potential. By removing underperforming individuals, we can redirect our efforts towards optimizing the remaining plants for a successful harvest. Rest assured, this adjustment will not deter us from our commitment to excellence. We remain dedicated to the cultivation process, learning from each experience, and striving for the highest standards of quality and consistency in our cannabis cultivation journey. Thank you for your understanding and continued support as we navigate the complexities of plant development and refinement. Together, we'll continue to grow and evolve towards greater success in our cultivation endeavors. 🌿💪
Processing
Likes
1
Share
@Zanto
Follow
Day 26 of flowering They started to produce trichomas and rosin very early as last time. Now I can imagine the big colas this baby is going to produce. Finished with Delta 9 applications, now only NO Stress and guano
Likes
60
Share
@m0use
Follow
Mother Fucker, Had all this typed out and it fucking closed the tab and would not load last edit. Lets try this again. This has been a big week, got a transplant in and ran into some issues with the feed. Transplanted the plants from their 1L to 2Gal/7.5L pots and gave them some LST to keep em low, all went well in transplant process as seen in the video however the Gaia Green burned my plants and this is odd considering I did not use it full strength as per their directions. They recommend amending medium for pots and baskets at a rate of 3tbsp or 45ml per Gal and I used it at a rate of 60ml in 2Gal, not even close to their 90ml recommendation. Seems weird why I would be experiencing this. I reached out to them and have not heard anything back. kinda disappointed about that. I have two batches of Gaia Green 4-4-4 and when I ran a test side by side on them I found the old one I am currently useing has a higher EC value then the new one I got. I dissolved 1/4 teaspoon into 250ml of water and gave it a good stir, I then let it sit for 5 min and measured its PH and EC, I also tested out the Insect Frass from them as well and it was similar numbers to the new 4-4-4 batch. I got readings of 0.98 for new 4-4-4 and 1.43EC for the old batch of 4-4-4. Seems off. I also tested all the other things I added into the soil and they did not spike EC to any significance. I'm hoping they reach back out to let me know whats up. PH was on point and nothing crazy all aorund 7.1 I also tested the PH and EC of the watering solution to confirm it was the 4-4-4, added in some yucca in their as well as other beneficials that I normally do in soil grows. all within range, PH down with Phspohric Acid and EC under 300 A+ In other good news I finalized the PPFD maps for my tent and lights, I use 2x 240w Mini Sun 2's from Medic Grow, They don't normally use the lights in a twin setup in 2x4 tent so thus they had no light maps for me. The grow shop I go to lent me their Quantum Par light meter and I went to town, I demoed this unit last week in a little video and then went onto say how I messed up the readings and needed to redo it all. Well I had to have the meter returned and was working all week so only had time to get one height measurement in at 30" with all the intensities of the light 40-60-80-100% I had a feeling I was over blasting them with light but the amount I was thinking was not even close to how much more I was giving them. I was running my plants before at 80% and maybe 20" hang height. I was nuking them. It shows my ideals are going to be 40% in veg and 60% in flower with altered lighting schedules to accommodate a proper DLI. As of right now I am giving my plants 42 DLI in veg at 18/6 and that's a bit much for me. I would like to see this number closer to 35. So if I edit my schedule down to 16/8 it will give me a DLI of 37, when I got into bloom if I go 11/13 I will also get a DLI of 37. If I kept it at 12/12 at 60% I would have a DLI of 41, and If i did it like last time 12/12 at 80% I would have a DLI of 55... 41 is not the worst but I think it might be to much. we will see based on how the plants are growing. I used a free heatmap web page tool to make the PPFD maps, its not perfect but it works out well for me. I did all the intensities on their own image and also did one main image with all the intensities that shows the strength of 100% vs 40-60-80% in colour. The one light on the right side does not seem to be as strong as the one on the left, Or it could be some weird things with my tent, When I looked at the numbers with the door open they did not fluctuate as much. so who knows, I tested them with the door closed and extractor fan on as that's what the plants will be getting when in the tent, I centred the light as best I could and levelled it out with a bubble leveller. It was funny seeing how the PPF readout numbers changed as the tent sucked in around the sides, It is a good thing I have the mid support bar to prevent it from doing that to much. Once I mapped out all my readings in PPF I then calculated its average and PPFD using the grow space dimensions of 2x4, applied the convention and got my average PPFD :) The pepper are also doing well. I don't think I noticed a difference between soaking the seeds with some peroxide 1% vs plan water. Won't do that again does not seem to help anything. All but one variety as popped, the naga morich, has not been germinated, I was reading online that dehydrated seeds can have as low as 5% germination rate, With this in mind I took a lot of seeds from my older naga morich peppers in the pantry and placed them in a damp paper towel. I have a feeling given their age and treatment previously they will not pop, but that's ok if they don't, I have a large assortment of pepper for this season and they are already well on their way to giving me a good crop. Have not noticed any other fungus gnats in a bit. Happy about that, don't know where they went, unless it was just a few and they died before breeding. One can hope, Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.com/grower/MedicGrowLED
Likes
6
Share
WEEK 4: The plants are now in the third week of the growth phase. I topped all three plants on the main stem and cut off the 4 largest top leaves so that the side shoots have more light available. Plant #1 is clearly the smallest and is not as developed as the other two. Since I only want to take two plants into the flowering phase, I tend to sort them out. Plant #2 looks the most vital and has already developed a noticeable smell. Plant #3 still has a strange leaf shape, although I have the impression that this has improved slightly The plants in 6L pots and added 5% FLO (Living Soil Fertilizer). I let the soil develop for 14 days beforehand. Clear mycelia have formed and the soil has a very pleasant forest floor smell. - Light Power: 40% - Soil: BioBizz Light Mix + 5% FLO (Living Soil Fertilizer) - Additives: Dynomyco mycorrhiza granules
Likes
17
Share
This week has been a breeze! I've been giving light water with the sprayer keeping it moist not too dry! Allowing that top feed to soak in time! This plant is happening, and happy! I'm loving this living soil let me tell you! It's been so much easier on me!! Much love and happy growing
Likes
12
Share
Primeiro mês de floração, ótimas plantas, super saudável, fertilização ok, folhas com. Um verde bonito, rega e alimentação todos os dias. Plantas satisfeitas.
Likes
4
Share
Everything is doing good despite me not having ac at the moment! House has been staying at 85 degrees so the plants are happy at least. Plan on solving the ac issue by next week to start possibly flowering soon 🤞🤞. No health issues to report, just added another fx3 to the 3x3 to have 2 different phenos!
Likes
18
Share
week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.
Likes
11
Share
Havrested a bit before just becouse i needed to have a harvest before the full one
Likes
2
Share
I think I won't add anymore nutrients to the water, instead I'll just let the plant fade naturally. It should only have another week or two of flower.
Likes
11
Share
Summer is happening at full speed so a short entry here. Getting close anyways so wont be too much to cover. 7/15/2024 Day 55 Temp: 70.3 F RH: 64.3% VPD: 0.89 kPa Plant #1 Height: 37” inches Plant #2 Height: 31” inches Light distance 10” & 16” I’m going to water 2.5 gallons an hour before the lights come on tonight I’ve already prepared my water jug with a half a teaspoon of bio-phos, about five ML actually put a little more of the elixir in today and then the Q so I put all those things in the water and will give it to him before the lights come back on. 7/17/2024 Day 57 Temp: 81.8 F RH: 63.7% VPD: 1.31 kPa Plant #1 Height: 37” inches Plant #2 Height: 31” inches Did some work in the tent to try and alleviate some of the heat stress. Bent over the main cola to even out the canopy. Fed the regular feeding and some Oly Mtn Fish Compost.
Likes
38
Share
Day 79 11/28/2021- Welcome to week four of flower. Today fed nutrients and did a defoliation to take off the smaller buds that won’t get enough light. Day 81 11/30/2021- Just water her today. Day 82 12/01/2021- Trying something new. Day 83 12/02/2021- Water day for them. Also camera needed update but made it work. IOS/ANDRIOD PAR METER APP. It is very accurate highly recommended this for everyone. https://apps.apple.com/us/app/photone-grow-light-meter/id1450079523 Day 84 12/03/2021- Last day of the week, and Wow the grow is amazing!
Likes
5
Share
This week with this girl has been awesome she has really started to take off now that her soil is rite! She grew over 5" in the last week and that's what I chose to take for my clones. 2 to be exact and hopefully will have better results with this go around. Took me 2 clones off this mom plant so now she has been topped twice. Hopefully with the lessons from personalsmoke will end up with a couple clones of puffinz. They look sad at the moment but I havnt seen what normaly happens to clones 24 hours later. I give momma about 330 ml of de-clorinated 6.8 ph water every 2 or 3 days when the hydrometer goes around 3. She is in living soil so for now will just sit how we are and just straight water to make her happy! Thanks everyone for the love All sent back 10 fold love
Likes
9
Share
@Plebsi710
Follow
Still 3 plant in the tent at the moment , 2 of them are harvested and drying right now :) another should be ready for harvest this week :) I do have a plant that seems to be late compared to the other , although she is now massive compared to her sisters
Likes
57
Share
got them all in there 10 gallon pots , I don't like too start autos in peat pots in a cup but needs must as I was waiting for the soil too arrive , these first two weeks always seem like watching paint dry , very slow and boring and nothing much seems too happen 😀😴😴😴