Likes
Comments
Share
Eccoci qui... Tutto va per il meglio, questa settimana si inizia a vedere la resina e ora si inizieranno a formare le cime, per questo aggiungo Sugar Shot di @xpertnutrients vedremo l'evoluzione settimana prossima. Odore intenso, non presenta carenze e spinge veramente forte. Sono molto soddisfatto di aver provato questa bellezza, vedremo cosa ci riserva la fine della fioritura. Grazie a tutti per il supporto🔥🌲❤️
Likes
34
Share
So growing this strain was very easy i first topped her and then tied down every branch that came too high and she maintained a really compact form measuring only 40 cm from stalk to top.. Bud to leaf ratio was amazing too it had really few leaves and has been really easy to wet trim.. The wet weight was around 360 grams wet trimmed and the total dry weight after 5 days of drying was around 80 grams wich of this quality its outstanding for just 11 weeks from seed to harvest!! So in general i truly enjoying growing her looking at her wonderful colours in flower and will surely grow again.. Thanks again to everyone passing by and liking my diaries hope you have a great day and wish you all happy growing!!!
Likes
10
Share
Veliká škoda že jsem neměl víc semínka . Tahle indica stojí za to ji zkusit .. DOPORUČUJU😎🍀💚
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Likes
7
Share
This 5 plants are absolutely gorgeous, they're supper similar to each to each other beautiful leafs and structure, looks like this lady is gonna provide us with beautiful citrussy buds!! Stay tuned everybody! Great autoflowering strain by SPLIFF SEEDS!
Likes
18
Share
@Coughy
Follow
DAY 62 1 day early of start of new week, just waiting for some more ambers, nearly ready🎉 Still running RO only, 40 PPM. Still keeping it pH’d, it likes to drop slowly still. However, I don’t get why pH is important during flush tho. Not like I need to keep nutrients available for plant to suck up... 🤷‍♂️ I’ve been considering drilling some holes into the base of the main stem as to simulate the stalk-splitting technique. Maybe it’ll help speed things up... I’ll check trichs again tonight when lights kick on and make an executive decision and post updated pictures if it’s a go ahead. Day 63 I split me some stalks! Uploaded a video of the procedure. Day 64 This phenotype is developing purple leaves? Photos uploaded. Day 65 Harvesting... Day 66 More Harvesting... Day 67 Taking clones, moving veg plants to bloom tent. This grow is drying.
Likes
14
Share
@BLAZED
Follow
Week 13 (24-4 to 30-4) 24-4 Temperature: 23.8 degrees (lights on) 18.9 degrees (lights off) Humidity: 66% (highest) 53% (lowest) No pictures. Opened the reservoir for a couple of minutes. 25-4 Temperature: 24.7 degrees (lights on) 18.9 degrees (lights off) Humidity: 66% (highest) 52% (lowest) Increased the strength of the light from 60% to 65%. 26-4 Temperature: 25.2 degrees (lights on) 19.5 degrees (lights off) Humidity: 66% (highest) 51% (lowest) No pictures. I emptied the reservoir, there was 2750ml left. I made a 15L new feed and added it to the reservoir. Opened the reservoir for a couple of minutes. 27-4 Temperature: 26 degrees (lights on) 19.9 degrees (lights off) Humidity: 65% (highest) 47% (lowest) 28-4 Temperature: 26.4 degrees (lights on) 21.5 degrees (lights off) Humidity: 64% (highest) 47% (lowest) Opened the reservoir for a couple of minutes. 29-4 Temperature: 26.4 degrees (lights on) 20.6 degrees (lights off) Humidity: 64% (highest) 39% (lowest) Increased the strength of the light from 65% to 70% Opened the reservoir for a couple of minutes. 30-4 Temperature: 27.4 degrees (lights on) 21.1 degrees (lights off) Humidity: 62% (highest) 47% (lowest)
Likes
8
Share
@Skully
Follow
🇩🇪 Alles sieht gut aus 👌🏻 🇺🇸 Everything looks good 👌🏻 🇪🇸 Todo se ve bien 👌🏻
Likes
4
Share
Finally decent temperatures and we can start the flower! They recovered well from the temperature shock and show some growth. They got a massive haircut and trained. Now they can enter flower stage. Each plant got 50 g of Wizzy's Flower 6-8-10 organic fertilizer, 3 g / 10 L of Plant Booster and 1g / Liter Weedtamines. A few days ago. Tomorrow they'll get their dose of Pflanzengeflüster (Plant Whisper) to increase flower production.
Likes
74
Share
@Mr_Maes
Follow
This plant couldnt have grown any easier. She had a great smell, amazing structure, branches full of buds and responded well to everything i did to her. will be growing this again.
Likes
6
Share
@valiotoro
Follow
Hello everyone week 4 of flower has passed for this Mint Jelly auto ❄️ For the feeding schedule i stopped feeding Power Roots and Pure Zym and started feeding Green Sensation 0,5/l Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻
Likes
16
Share
Eccoci qui, Settimana all'insegna del Topping e dell'LST per far si che la piccola cresca con cime di serie a! Verrà eseguito scrog a breve non appena si allungheranno le cime. Topping eseguito il 16/01/2024, dopo un giorno ha reagito molto bene, sarà interessante lo sviluppo!!! Grazie a tutti per il supporto ❤️🔥🌲
Likes
4
Share
@BLAZED
Follow
Week 3 (27-11 to 3-12) What's good everyone? We started this week off with removing the 2 bottom shoots. The next day Santa came early 😁 Got 2 new clip fans and the AC5 Power strip from Spider Farmer. The power strip has 5 outlets you can control in the app, they can be turned on based on a time cycle, humidity or temps. It comes with a sensor that monitors light, temperature, and humidity. And a soil sensor that monitors soil moisture (VWC), temperature, and electrical conductivity (EC). It also has a light adapter to connect 2 lights, that can be controlled in the app aswell. The app shows the current VPD, i try to keep this around 1.0. In the middle of the week we topped her aswell. The next day we increased the light intensity from 30% to 35%. LUX: 13.000/13.500 to LUX: 15.000/15.500 This week's growing conditions were 17.9°C to 22.4°C with a humidity of 55.5% to 67.6% and watered 2 times with 0.5L. See you next week!
Likes
16
Share
Defoliated as well as more LST. The switch to the Mars Hydro TS600 has really done plant #3 good, she’s getting bigger and bushier!!! All is well except when I fed yesterday I forgot to PH the water so I’m hoping that doesn’t cause issues. Any advice on what I should do to negate that would be very welcome!!!
Likes
86
Share
@CANNASIM
Follow
------SETUP------ -HOMEBOX TRIANGLE+ .4sqm -BOSSLED LIGHTS 250W REAL -INTAKE FAN HIGH PRO - 107 m³/h -EXHAUST FAN PROFAN - 220 m³/h -TWO SMALL VENT FANS -HUMIDIFYER WHEN NEEDED -AC IN THE ROOM -15L SMARTPOTS -50%PERLITE 50%SPHAGNUM PEAT MOSS ------STRAIN------ GYO GREEN AK47 = GG AK47. The finished plant is sativa-dominant, of medium height, and produces great yields after a relatively short flowering period of around 60 days. The plant produces an extremely powerful odour and a memorable high. The THC levels are darkly dangerous 20% plus, as evidenced by the resinous crystals that coat the plant from root to tip. /BOUQUET Be careful! AK47 fires out an unusually strong, sweet and fruity aroma. /EFFECTS AK47 will leave you relaxed and mellow. This sativa-dominant hybrid delivers a steady and long-lasting cerebral buzz that keeps you mentally alert and engaged in creative or social activities. ------GENERAL COMMENT------ The first 7 days of this grow is almost complete, Blueberry and the AK47 germinated fine, had some issues with the Candy Kush Express, so the last seed is germinating, and seams that it will emerge soon! I'm optimistic, so basically till now we will do a free seed run, since this ones came with the genetics I purchased from seedsman and gyo green. 😎😛 -251217 First feed with a very light nutrient dose. Will implement some cal mag next water. Humidity has been a little hard to control, is oscillating a lot. ------GG.AK47 COMMENT------ So for the sake of productivity the setup is posted as an image as well as the strain quick info. I wanted to try the germination plugs and must say that i din't like the results, so i will go back in the germination technique by using straight soilless after the soaking in water for 12-20hrs. She took a bit to emerge, and was born with a cut in the cotyledons, as is possible to see in the pics, leaves are sharp, and unbalanced as a early mutation, can't id how this will evolve, makes me curious, and here nothing is trow away, if they get out of the medium, my goal is to obtain the buds. 😉 Happy growing and good holidays! 2018 is approaching, good vibes and a lot of light to all!
Likes
9
Share
Inizio nuovo ciclo Giovedì 26 settembre 2024 Aggiungo 75 lt acqua osmosi inversa ec 146 ph 9 Aggiungo tutti I nutrienti ottenendo ec 908 ph 6.5 Venerdì 4 ottobre Inizio controllo ec 1196 ph 7 Aggiungi 20 lt acqua osmosi portando l'ec a 950
Likes
21
Share
@NSCanna
Follow
Compost tea turned out well and if your curious about the microscopy, check the comments on my GMP grow. No signs of senescence yet so no feed needed, they are in a second run of the same soil so there should be plenty in there from before. Not very resinous or smelly, with weird wide stumpy buds. Definitely my least fav pheno of any plant I've grown so far, but it's the end product we're after so she may yet surprise.
Likes
4
Share
Bientôt la floraison s'annonce rester concentré les growers. My favorite.
Likes
41
Share
_Eyeing up trichomes clusters and buds as they ripen to determine a harvest day -Plant still drinking heavy.. -Bud flops, any motion and the branches are ready to lay. Heavy buds -Flipping Slurricane #7 -Day 69 harvest on BCS seed
Likes
5
Share
CBD Star bud seem to be thickening up despite obvious signs of deficiencies, likely due to a pH induced nutrient lock out. Phosphorus, nitrogen, calcium, manganese, molybdenum? It’s basically the periodic table of deficiencies. Main cola started to turn purple due to molybdenum deficiency? Found a spider mite on Cheese… sprayed the leaves down with a 1:10 alcohol:water solution which seems to have taken care of the mites.