Likes
Comments
Share
Lil youngin on their way home should be home for 4/20 along with 2 of their mother...as for the breeding project pollination is a success also been harvesting pollen(feminized) for later use Mothers are growing well jus to continue cut and set aiming for about 1000 already cut 3 and got 100...happy growing
Likes
1
Share
Hello everyone, We are into week 5 with the Gorilla Glue nr. 4 x White Widow, and everything is looking well. The buds are developing nicely, and I am adding 1.5 milliliters of 13/14 per liter water to the mix. Temperatures are ranging between 20° Celsius when the lights are off and 27° Celsius at the highest when the lights are on and the humidifier is running. For the rest, I can't say anything else than it's a waiting game; patience is the name of the game. Thanks for stopping by and have a nice day. Best regards, Growfather.
Likes
4
Share
It has been about a year since my last diary had to take some time off. My wife had cancer. We had to take care of that now I'm back. Maybe I can get a diary or 2 .
Likes
4
Share
First Week of Flower. I gave them 36h of darkness before flipping to 12/12 light schedule. Canopy is filled somewhat good and more important is a even canopy. Installed a second net in the middle of the week. The support will be necessary later. Did a bit of defoliation but the lollipop will be done in 2 weeks. Conditions of the Grow: 💡 PPFD: 900 umol/m2/s ☀️ DLI: 38.8 mol/day 🌓 Lightcycle: 12/12 h 💨 Humidity: 50-55 % 🌡️ 🌞Daytime Temp.: 21-23 *C 🌡️ 🌙Nighttime Temp.: 18-19 *C 🌡️🌱Leaf Temperature: 21 *C 🌡️💧Water Temperature: 18-19 *C Water TDS: 1000ppm | EC: 2000us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Vegetation Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container
Likes
17
Share
Start of week 8 and the lady developed nicely. Buds are getting more compact. Leaves are already frosty. First leaves getting light green, yellow. I will feed the lady with BioBizz nutrients to see, how she will develop. Harvest getting closer and the first pistils get brown. I think 3-4 weeks left. Keep in touch ! Cheers, HighZenBerg
Likes
9
Share
This guy and all his bloom. I will harvest now and save the pollen the… blueberry skunk has been pollinated so many times already via pre flowers… when I do start flowing his her I am interested to see how those seeds will turn out. This skunk male is a champion!
Likes
3
Share
Can't believe how beautiful the buds are becoming! Super happy with her.
Likes
410
Share
CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛
Likes
153
Share
@Ju_Bps
Follow
Hello my friends 👨‍🌾👨‍🌾, All was fine this week, #2 and #3, got just one time water, this start week, they looking stop drinking, so I've harvest the plants today, Except the #1, not yet ready. I'll harvest #1 next week, #1 got 3x 2.5l water + flash cleaner PH@6 I'll publish all the harvest next week, I can just say you buds have beautiful colors. Thanks to Mars Hydro for the TS1000 and Royal Queen Seeds for seeds ❤️❤️ https://www.mars-hydro.com/ts-1000-led-grow-light https://www.royalqueenseeds.com/autoflowering-cannabis-seeds/537-mimosa-automatic.html Have a good week end, See you next week 💨
Processing
Likes
15
Share
The grandaddy black is looking happy. Will be switching them to flower in a week or less. I gave them a flush and fresh nutrients. The humic acid really makes a huge difference in the uptake of nutrients. I am at about half dose on nutrients compared to what I would have to feed without it. Winter is approaching and bringing the low humidity with it. All of the humidifiers I have tried either dont work or I have to constantly refill the tank. So I decided to use my redneck engineering skills to throw this humidifier together. It holds 4 gallons of water and she pumps like a freight train. I have dubbed her the Steam Queen. I got 2 cool mist foggers that put out about 400ml per hour each and used some things I had around to make them a little float. Added an old computer fan to force the mist out through a 2 inch pipe. She won't win any beauty contests but she pumps out plenty of cool moist air. I also upgraded my exhaust to a variable speed for more added environmental control. Just going to do a little more training over the next week then try to make some buds.
Likes
Comments
Share
Week 4 (1.8.26 --1.15.26) took photos on 1.12.26 1.13.26 Transitioned to bloom nutes
Likes
20
Share
General —— Surprise, Surprise. Did another week and most of them should be ready by now. Gush Mints still has a lot of white hairs and could go for another week or two but I have limited space and need to move the other plants into this tent soon. So this will be the last update before they get chopped in 2-3 Days :) BroScience but they will get roughly 24-48 Hours of darkness Grounded Genetics - Zilk Road: 95% Milky, 5% Amber SQ1 - GRCxBBC #1: 95% Milky, 5% Amber GasStation - Gush Mints x Grape Cream Cake: 90% Milky, 5% Clear, 5% Amber Lit Farms - Black Rainbow: 100% Milky, no Amber Nutes —— / Light —— / Training —— /
Likes
19
Share
What can I say here? she exceeded my expectations and grew much more than I expected. I'm looking forward to its beautiful blossoms.
Likes
36
Share
@SAC87
Follow
Hi Growers. So all 3 FastBuds Blue Dream Auto seeds popped in less than 3 days. I’ve left them uncovered, added a humidifier and turned a fan on low to just to give them a little wiggle. They were sprayed and lightly watered in a 4” circle around the stalks to have those roots go search for water. One of the seeds hulls is still stuck to the cotyledon leaves. I’ve been spraying it to keep the membrane moist and hopefully she’ll split it open by herself. In the past when I’ve tried to remove them they cause damage to the leaves so we’ll wait and see. Just gonna give them some time and mist for a week and start super low feeding according to the FastBuds auto feed schedule. I’m looking forward to seeing these babies grow!!! Happy Growing 🌱
Likes
8
Share
@QQNPK
Follow
Going alright however they didnt like the soil refill i had to buy some crap and didnt mix my own this time so they got abit chocked and locked out well well
Processing
Likes
6
Share
I surprise anytime with dutchfem strains indoor, easy Girl Scout Kush they started a good flourish, fat buds, bottom buds also big, resin started, sweet smell of fruity mint chocolate kush when you push the nose in her flowers and medium big size of plant look very cute. Was a nice week. I know girl scout kush can purple buds and leaves in last period of flower, I wait this moment. I love this strain indoor.
Likes
Comments
Share
10/28 - Topped middle cola on both sides - tied down outside bigger stems - heavy nute feed - top feed of worm castings on to coco - Increasing nute feeds next week
Processing
Likes
70
Share
@MephistoGenetics, Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable environment in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 10 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. I am very excited to see how the new growroom will work and how this Illuminauto 21 - Sour Crinkle will turn out. Illuminauto 21 - Sour Crinkle (Grape Crinkle x Sour Crack) Two of our fastest and frostiest varieties collide to make a sweet and sour delight! Expect super frosty, compact nugs that won't be a toke for novices. Destined to be a great strain for extraction work too! Plant size - Small - Medium Cycle time - 60-65 days from sprout Indica/Sativa - 80/20 Frost level - Extra Ridiculous https://www.mephistogenetics.com/product-page/illuminauto-21-sour-crinkle -------------------------------------------------------------------------------------------------------- 2017-09-18. Start of week 4. I have defoliated her and she got water and nutes. She is 20 cm high and have not start to stretch yet. -------------------------------------------------------------------------------------------------------------------------------------------- 2017-09-20. Kl 23.00. Did some massive defoliation, added video and pics ------------------------------------------------------------------------------------------------ 2017-09-22. The girl has recovered well after my massive defoliation. She is now 24 cm high. Gave her water and nutrition today.