Likes
Comments
Share
I'm expecting one more week to chop. Most of the trichomes are cloudy. Fan leaves are yellowing already and I'm gonna be using Flawless Finish for this final week. It will be a clean smoke for sure. My feeding schedule was all over the place on this grow, lesson learned for the Royal Creamatic that I'm growing.
Likes
5
Share
Not sure why the other seeds didn’t germinate. One of the other Bananacane’s started to but died off upon sprouting
Likes
31
Share
# Tangerine Snow F1 Fast Grow Report (Outdoor) 2024-09-12 ## Overview Tangerine Snow F1 Fast proved to be an exceptional strain from start to finish. This report focuses on the outdoor grow experience, as the indoor plant was harvested earlier and has its own separate harvest report. ## Strain Characteristics - **Ease of Growth:** Very easy to grow - **Structure:** Excellent, with a super structure - **Appearance:** Nice, glittery colas - **Bud Structure:** Open, very sativa-like - **Aroma:** Delicious scents ## Growth Performance - **Adaptability:** Mastered various obstacles throughout the growing season - **Weather Resilience:** - Thrived during a cold and wet early season - Adapted well to extreme heat and sun in early August - **Pest Resistance:** Easily withstood dogs, cats, birds, and insects ## Challenges The only significant drawback was its susceptibility to mold, which necessitated an earlier harvest of the outdoor plant. ## Growing Conditions - **Location:** Outdoor (with comparison to indoor grow) - **Season:** Experienced variable weather conditions ## Future Plans - Definite plans to grow again, both indoors and outdoors - Considered a "keeper" strain ## Additional Notes - The indoor plant's harvest report is available separately and recommended for review - The current plant is being revegetated: 1. Initially grown indoors 2. Harvested 3. Revegetated outdoors 4. Recently moved back indoors 5. Already showing promising bud development in its new indoor environment ## Conclusion Despite the mold issue, Tangerine Snow F1 Fast is highly recommended for its ease of growth, attractive structure, and overall performance in various conditions.
Likes
6
Share
Update of Goofiez 2 of compound genetics!! On RDWC it’s literally super fast grow !! We are doing a pheno hunting of 12 plants and we seed 4 of them that are the best at the moment
Likes
9
Share
Siamo agli sgoccioli, un altro paio d giorno.. forse settimane e raccogliamo!
Likes
12
Share
@Piablo
Follow
Day 7-9: Had a good environment overall, although the light was probably much too high. I didn't realise until quite late that it should have been 60cm above the seedling, and I had it around 120cm at first, and then 80cm. As a result the stem is a bit stringy. Day 9: I lowered the light to 60cm above the plant, and it won't go any lower. the recommended for this light is 30cm above the canopy, according to this very useful article: https://www.growweedeasy.com/how-far-grow-lights, but it's still in seedling stage and I'm guessing the plant will grow up a bit more, and I can always lower a little bit more. Also it's pretty damn hot, so I don't want to overdo it on the lights. I've been keeping the water consistent and just topped up a little on recommended nutrients (more grow, a little micro, adding a little bloom as it comes closer to flowering). The reason for this is because I want to maintain the consistency of environment and monitor the plant for any signs of unwellness. Because Sativas are sensitive to nutrient burn, I'm being conservative in this respect. The temperature with the light lowered is a steady 26 C, and I'm maintaining the humidity at around 70%. This is pretty good for this strain, as a sativa it likes higher temps and humidity. The water pH is around 5.9, also desirable. I've also been wondering if the plant is getting enough CO2. Is it necessary to buy a measurement device and some CO2 bags? Overall the plant seems very happy and is looking healthy. Day 10: cleaned the inside, added more grow, added more clay pellets since she looks a bit thin and stalky and needs extra support, and there were not many pellets present. Light distance is currently around 60cm. Though it won't go any lower with the straps, I will look at lowering it more with some extra rope as the ideal height will eventually be 30cm for this 250W HPS light. Added more Ph buffer yesterday evening and we're currently sitting around 5.7 ph. I was aiming for 5.8 but this is still acceptable. Temperature is around 25 - 26 C, humidity is around 70%, though I will begin lowering this as she grows. I will probably replace the water sometime this week. Upon further investigation I realised that my water levels were too high, and were possibly suffocating the stem. I reduced water levels by a few cm since I had previously been topping up without realising possible damage. I feel like today is the day that this seedling is finally becoming a plant. She has grown some long roots already. Day 11: I further lowered the light to around 40cm using some extra string. It's not super ideal, but for now it's ok. The plant was falling over it's own weight so I added some extra pellets around it for support and it seems to work. I'm hoping she won't stretch as much now that the light is lowered. The inside fan is still on and on full power to build up extra stem strength and keep temperature down. I'm attempting to keep humidity around 60%, a little lower than before. The temperature is significantly higher with the light lowered, easily maintained by periodically opening the door and leaving in cool air from outside which runs just past the intake fan. I'm slightly concerned about the Monstera Deliciosa plant which is sitting just opposite and above the intake fan. Would this have any effects, positive or negative, on the grow? Google is coming back blank on this.
Likes
4
Share
@Jabbamo
Follow
_______________________________________________________ Mi. 25.3. - 3,5 Liter pro Pflanze gegossen (ca. 300ml Drain) - Rainpoint Bewässerungssystem eingesetzt - 1L auf 3 Pflanzen Nährlösung per Hand angegossen - Programm: 3min. ON / 3min. PAUSE / 3min. ON - 2L pro Zyklus. - 1L klar spülen zur Systemreinigung 1,2 ml / Liter "Calmag" 1,5 ml / Liter "Bio Grow" 4,0 ml / Liter "Bio Bloom" 4,0 ml / Liter "Top Max" Ph 6,2 / 790 ppm _______________________________________________________ So. 29.3. - 3,2 Liter pro Pflanze gegossen (ca. 200ml Drain) - 1L Nährlösung per Hand angegossen - 8L Nährlösung per Gießsystem - 0,5L klar spülen zur Systemreinigung 1,2 ml / Liter "Calmag" 1,5 ml / Liter "Bio Grow" 4,0 ml / Liter "Bio Bloom" 4,0 ml / Liter "Top Max" Ph 6,2 / 770 ppm
Likes
153
Share
@Ju_Bps
Follow
Hello mate growers 👨‍🌾👨‍🌾, All was fine this week, I've got my new lamp from Mars Hydro TS1000 💨👊, plant look happy :) I'm a bit in overfert this week, so I didn't give sugar royal, #1 1.5l, #2 1.3l, #3 1.2l Water + rqs micronutrients tabs Water + rqs micronutrients tabs Water only PH@6 #1 continue a bit to grow up #2 looking more leaves turn purple and buds start to be frosty #3 buds start to be frosty Weather was hot this week, so grow room more hot than usual 2 days 28*C. Humidity up also, average 65%, up to 75%, less 55% Hope conditions will be better next week, Thanks to Mars Hydro for the TS1000 and Royal Queen Seeds for seeds ❤️❤️ https://www.mars-hydro.com/ts-1000-led-grow-light https://www.royalqueenseeds.com/autoflowering-cannabis-seeds/537-mimosa-automatic.html Have a good week end, See you next week my friends!💨💨🌲🌲🌞🌞
Likes
40
Share
Week 15 - unstoppable growth! My measuring stick is at its end. It only reaches 180cm and we are above that. It's getting hard to reach and prune the top but I'm not giving up. Temp is stable, humidity at a nice level, lots of sunshine. This summer is really something. But we had a huge storm. Nothing a little tape cant fix. One of the early branches broke off, but my net caught it and with a little tape it's as good as new
Likes
14
Share
Welcome to the Week 10 update for the Sweet Seeds Gorilla Girl XL Auto’s. Not much to report as this grow is on cruise control until harvest. I will be finishing up with the bloom fertilizer and starting to flush as these lovely ladies finish out Week 10 and move into Week 11. Defoliating as necessary and consistently checking trichomes as I’ve already spotted the first few ambers in and among the already cloudy trichs! Thanks for stopping by and checking out my grow! 😎
Likes
14
Share
So welcome to Week 9 of the Sweet Seeds Gorilla Girl XL Autoflowering grow! Unfortunately after two years of due diligence- I was finally infected with Covid 19 so I have gotten really behind with this diary. In Week 7, I switched from the Grow to the Bloom fertilizer at a rate of 2.5 mls per gallon. I am still watering every 4th day at 3 litres per plant or 0.75 of a litre per day per plant. This strain seems particularly hungry/greedy so by the end of Week 7, I’ve decided to fertilize with every watering instead of every other. I’m not increasing the dosage of the fertilizer but the frequency in which it’s being given. Other than that the plants are doing fine through Weeks 7, 8 & 9 with the buds fattening up nicely, loads of wet to the touch resin and a super strong smell emanating from the tent even when it’s closed! That’s it for the past three weeks, Covid sucks and thank goodness harvest is just around the corner! Apologies for not offering up any further "mom’s tip of the week" but I’m just finishing up this diary for kicks at this point. Thanks.
Likes
33
Share
Our number #11 is my favourite, in terms of shape, amount of bloom, type and scent of flowers, bouquet style. It really is a great looking plant that I would recommend everyone to grow as soon as our friends at Seeds Mafia release it. https://seedsmafia.com/en/ https://www.mars-hydro.com/
Likes
10
Share
@LST420
Follow
Week 13 The temperature has risen and has been high for the past days so I had to dial down the light to it's minimum strength. The plants are getting ready for harvest soon.
Likes
18
Share
week intel: im felling in love with them everything is good . this week was time of second net layer , the first layer was for spreading the branches and doing LST now the second layer is for supporting branches for later weeks when the buds gain weight and gets heavy the net will hold branch stand up without benting. stresses: im just gonna cause a little E.C stress to raise the terpens. i found their max tolerance is 1.9 E.C so im not gonna reach or get close to that amount again and beside this wont cause any more streses untill week 6 that will do second pruning and we are done with trainings then. feeding: as always im feeding plants 3 times per week with nutrients , no plain water at all, just with nutrients with adjusted p.h at this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) and karbo about 950 ppm - 1.8 e.c to cause a little e.c stress. day 3 : i feed them low dose for start of Green House Feeding Booster around 267 ppm - 0.6 e.c alone cuz this bad boy is very strong. day 5 : i feed them with medium dose of Top-Max around 160 ppm - 0.3 e.c to let them recover the stresses and eat the previous nutrients untill next feed at next week and the next 2 days will rest and eat :D just remember never feed them plain water besides the first week of germination always feed water with nutrients to feed them right p.h every time and to avoid excess water problems, and let them eat the previous meal for 24 hours and dry the soil, so at total only feeding nutrients 3 times a week other days let them dry and rest
Likes
19
Share
Very easy strain to grow. I grew the White Critical Express previous to this grow, I really liked it and wanted to try growing an Autoflower so I went for the Critical 2.0 and it was worth the grow.