i harvested the top nugs mid week 8 and the rest end of week 8 | whole plant is in the freezer now | strain is stretchy as hell but i will pop the other 2 beans later. next up is dantes inferno cut

Heute geerntet Blütetag 56, da fast alle Trichome milchig sind und die ersten sind auch schon Bernstein im oberen Bereich. Bei der Ernte kam ein sehr starker citrus Geruch 🍋. Bitte das Video anschauen, da sieht man gut den Frost . Heute ist sie noch in der gefriere und morgen wird gewaschen 💪🏻🥦. Update 1 Heute gewaschen mit der Hash Vac Methode 💪🏻

day 70 was harvest day !! really fast strain, 24h light ON really played a big role as well frosty buds and amazing strawberry smell, now lets dry it !!

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....

Day 16 of flower

Just repotted these clones ... They have amazing roots... Looking very healthy

5/28/25 starting to fill out nicely and getting frostier and stankier. Still havent been giving any nutrients or anything. Just water

Our Zamnesia Slurricane has reached 16 buds. I'm growing them a little more to make sure they don't go into flowering with small brunches but we're almost there, a few days and they'll go into flowering. She's a plant with a low internodal distance, they're not the most suitable for topping due to the slow response of the mini brunches but you just need to let them grow a little and not go into flowering straight away to get an excellent result anyway. As a general rule but very general plants with a low internodal distance are less suitable for the application of the techniques unlike plants with a wide internodal distance which are very easy to handle, they grow more slowly and can reach excellent dimensions even if worked with techniques that keep them low. The Topping worked very very well the plant at the moment of topping went into overfertilization due to the evident slowdown in growth, so I slowed down the fertilizer for growth but it was about to go into crisis, so we're starting to give fertilizer again. When topping is a delicate moment it is probably better to do what I explain below. The ideal when topping is probably to start with a soil fertilized with gradual release or to start preparing the soil for a period that is at least enough for the vegetative phase at most by adding a bit of alga grow which alone I must admit gives me some problems at least in this case if the plant grows straight much less indeed nothing. We are always using soil, feeding and all the recommended additives from Plagron 100% organic, we have only lowered the amount of grow in this topping phase for the reasons mentioned above. ---- Decide on the right soil and calculate your fertilizer sheet based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy... It's a super News! ---- https://www.zamnesia.io/it/11177-zamnesia-seeds-slurricane.html Zamnesia Description // Do you want to add a prestigious genetics to your grow room? Slurricane is a premium US strain created by In House Genetics and now available to growers thanks to the breeding processes implemented by Zamnesia. Born from the fusion of Purple Punch and Do-Si-Dos, Slurricane is 60% indica and incredibly vigorous. Whether grown indoors, outdoors or in a greenhouse, this strain can produce large quantities of dense and aromatic buds. Add Slurricane to your assortment and enjoy growing one of the most beloved hybrids in the United States. All the best that mother nature can offer is on ---- www.zamnesia.com

Day 23 - These chubby, stubble little chicks finally got tall enough that I could LST the top cola. These girls seem healthy as shit but man I'll be happier as they continue to stretch. It's been hard working in the soil because of all the fan leaves. Worried about future moisture issues. Still have no clue how much to water them. Day 25 - Gave them their first nutes. Used about a third of the recommended pair from the fox farm trio since I'm using Ocean Forest soil. I've heard it's pretty hot, so I just fed with Calmag the last ten days. Continued with training the branches and it's really helping out. The branches are easy to tie down now that they are getting some length. Lights turned down to 82% for the last two days or so. Did some rearranging since the par in the center is slightly higher. My thought is the increased distance to the center will allow me to get balance out the two Pinots since the Sammy is shorter. We will see. I may send that off to live with a buddy if I run out of space. Random - Did I mention one of my other hobbys is home automation? I uploaded a shot of my dashboard that changes every time I get some crazy idea. I have fun messing with it and it keeps me in touch with my plants. Day 29 - two are starting to flower. Removed the humidifier and bumped the light up to 90%. Finally realized what a dry pot weighs so that helps to know when they need water. Time lapses are really helpful for me because I can see how each cola is developing. I can see where I need to tuck fan leaves and focus some lst love. Big momma is complete and going to let her be since I think it’s well distributed. The other Pinot is a few days behind, as is the Sammy. Happy with all Bree so far. Work has begun on the automatic watering system for when I need to leave for a few days

We are going to send these two into flower the second I get my hands on a 3x3. The plan is to move them into the 3x3 until they finish up. Leave the 5 Autoflowers in the 4x4 until they finish then start a perpetual cycle between the two tents. A 3x3 for Veg and 4x4 for Flower! I’m extremely excited about the future!

Começando a semana 4 com o lollipopping para dar força aos tops buds. Planta com otimo desenvolvimento. Adcionarei 6ml.l de mel para a cura dos cortes feitos. 4 dias depois de fazer o lollipopping a planta começou a desenvolver polem.

Hello growers and tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Alright so as promised to make up for the few pictures from last week I've got more photos and a little video to see more detail. She hasn't stopped growing yet, that's another 10cm this week. Really really visible for my top to neighbors.. 😂 Now I'm just at a point where it's like fuck it, whatever happens happens. She's not stacking as good as I hope on the top four colas. For my taste there's too much space between each node. The bottom growth isn't getting that much light anymore but there's some little bud sites.. No smell yet but I'm guessing that'll kick in next week. That's it for this week. Stay tuned to see how she flowers. Stay safe!

First moldy spots found... 😬 Defoiliated the Moby some more for better airflow.. Hope, the next week's aren't too wet...

I said!! it's huge ready for flowering!! one week to change the light schedule to 12/12 I've already lost count of the toppings I've made. I will always take some of the bottom leaves out. that no longer catch light and only waste energy. I water every two days. small quantities and One feeding per week. I make adjustments whenever necessary. I also don't spend a lot of nuts as long as she doesn't really need food as in flowering. you will realize soon

1 semana y un día, después de haber pasado a 12/12

Day 3 week 3 looking amazing

Good morning, we just completed week 4 of veg and today is day 29 which is the start of 5. Temps are steady and these girls like it a little cooler and more humid, I tried to increase kpa to 1 slowly from .9 and they were not happy at all so I’m just keeping it at .9 for now! They also are thirsty girls wanting water every 2 days drying the pots up quickly! They got a dose of recharge which I like to do every 3 weeks! Also starts silica now that I started training the branches down for a better even canopy ! Moving forward I will alternate fish shit one watering and silica the next the rest of the way! I’ll be transplanting to their final 10 gallon pots today or tomorrow then will do some more training once they recover from that! I don’t usually notice transplant shock so I’m not anticipating any issues! Thanks for reading and see ya next week