Likes
Comments
Share
2024/01/20 : as it survived, shiva skunk got a decent pot (1 gallon smartpot 50% canna coco pro / 50% hydroton) and 3 others are going on LST... 3 days growth : afghani #1 - 19.0 cm (+3.0) sensi skunk - 17.5 cm (+4.5) hindu kush - 16.5 cm (+3.0) shiva skunk - 11.5 cm (+2.0) 2024/01/23 : shiva skunk looks bad, with leaves going down and yellowing... it didn't like its transplant. The others are looking OK. I may have seen first pistils... The heights are : afghani #1 - 22.0 cm (+3.0) sensi skunk - 18.5 cm (+1.0) hindu kush - 18.5 cm (+2.0) shiva skunk - 11.0 cm (-0.5) 2024/01/24 : spayed with Foliar Spray from B.A.C. last night, don't know if it was OK for shiva skunk, we'll see. 3 others are preflowering without a doubt now. afghani #1 - 24.0 cm (+2.0) sensi skunk - 20.0 cm (+1.5) hindu kush - 21.0 cm (+2.5) shiva skunk - 11.5 cm (+0.5) 2024/01/25 : shiva skunk is struggling but it's not done yet. And I think stretch began for others.
Processing
Likes
6
Share
@Weedzoks
Follow
La plante a fortement jauni cette semaine et des taches sont apparues Flo 23: Arrosage eau Flo 24: Pulvérisation de 3ml de Vita Race
Likes
2
Share
@TEKNOGROW
Follow
CONTEST SWEET SEEDS SWEET SEEDS SWEET GELATO GROWER ADRY www.teknogrow.it Instagram @teknogrow
Likes
6
Share
Raised lights Added clip fan blowing from above Defoliation
Likes
16
Share
Started a little training, cut down the older fan leaves and topped up. I’m adding a tiny bit of root stimulator cause changed the pot size last week so it will to promote a faster growth. Gotta keep this lady low cause the box is quite small. So excited 😆
Likes
19
Share
De really took flight from last week, should be starting flowering theese days coming. Just watering them with normal water and some tomatonutrition every now and then. Im happy they look so well in this type of scandinavian climate.
Likes
35
Share
@Paulolo03
Follow
DAY 27, most of the plants are flowering, LST works so well. I'm worried because some of them seems to have advance, I don't think the buds should be that big for their age, maybe the heat stress made them flowering faster ? Moreover, some plants have their lower leaves turning yellow, I don't know what it is, give them nutrients once every 2 watering and I'm being very light with the amount of nutrients. Ordered 2 cooltubes, one for each light, it will help to cool down the room, gotta pick them up at the store and use them today. DAY 33, I followed your advices guys and added a bit of each nutrients for their deficiencies, don't know exactly if it was Ca, Mg or N deficiency but I can tell how better they are ! Water pH between 6,2 and 6,5 with 3acid down, hygro 55%. Because of the lower hygro for flowering stage, temp is going higher, I'll try my best to take care of them because another heat wave is coming... Thinking about reducing the light time to 12/12
Likes
53
Share
Ich bin mehr als zufrieden, es gibt ein paar trauermücken aber das is nicht der Rede wert am Montag ist erntetag, die Pflanzen sind so extrem harzig wie noch nie zuvor 😁😁😁😗
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
18
Share
@Hashy
Follow
Week 3 Light cycle=18/6 Light Power=120w 50% Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 65% Low Rh= % Rh step=0% Speed max=5 Speed min=1 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 19c Radiator off= above 20c Humidifier on= below 60% above 23c Humidifier off= above 63% Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 17c Radiator off= above 18c Humidifier on= not in use Humidifier off= not in use Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.6-1.0 DLI aim=18-22 EC aim=0.8 PH aim=6.2 Fri 5/1/24 #3 (Day 15) 📋 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Neutralise=0.1ml/L Roots=5ml/L Feed=nutes Volume=200ml Easy Ph down=0 drops/L Ec=0.27 PH=5.9/6.2 Time=2.30pm Runoff. Total runoff=45ml Ec=1.47 PH=6.0/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Sat 6/1/24 #3 (Day 16) 📋 Looks fine even with tiger stripe Sun 7/1/24 #3 (Day 17) 📋 Potted up to 8L pot with biobizz light-mix. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Neutralise=0.1ml/L Roots=5ml/L Feed=nutes Volume=3L Easy Ph down=0 drops/L Ec=0.27 PH=6.0/6.3 Time=1.30pm Runoff. Total runoff=500ml Ec=5.6 PH=5.4 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Removed humidifier. Adjusted light height. Light Power=100w 42% H=11cm D=61cm DLI=21.7 Mon 8/1/24 #3 (Day 18) 📋 Doesn't look to bad, foliar sprayed (cal-mag 5ml/L) Tue 9/1/24 #3 (Day 19) 📋 Having a cold spell at the moment so I'm adjusting the smart settings to compensate. Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 20c Radiator off= above 21c Humidifier on= not in use. Humidifier off= not in use. Dehumidifier on= not in use. Dehumidifier off= not in use. Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c Humidifier on= not in use. Humidifier off= not in use. Dehumidifier on= not in use. Dehumidifier off= not in use. Wed 10/1/24 #3 (Day 20) 📋 Still looks funky. Thur 11/1/24 #3 (Day 21)***** 📋 H=14cm D=58cm DLI=22.7 This one still looks funky, there ain't nothing wrong with a bit of funkyness. I must admit she is doing fine. I'm wondering if these tiger stripes are going to be on every set of leaves she grows. Only time will tell. Back soon. Take it easy.
Likes
21
Share
Shes looking great!!! got some nice flowers started and I bent the main cola back just a little more with a yoyo to give the other branches better light coverage. Got the lady all trimmed up and looking lovely. With some luck and lots of effort it should be smooth sailing for the next month or so as everything is in place in the tent and virtually all trimming done its time to just let the flowers grow!!!
Likes
7
Share
Hiiigh friends 🙌 Welcome to the last week. 🍀 She is harvested, dried and cured. An amazing taste for sure! 🍑 See you next run 👋 Arturo for KannaKullektiv 🙏
Likes
4
Share
@Tazard
Follow
She is clawing so I cut the base nutrients in half. I removed the lower fans to open up her branches.
Likes
4
Share
📆 Semana 4 El stretch entra en su fase final y el crecimiento vertical comienza a ralentizarse. La estructura queda prácticamente definida y la energía de la planta se dirige cada vez más hacia el desarrollo floral. Los sitios de floración continúan expandiéndose y los primeros cogollos empiezan a ganar volumen, aumentando también la producción de pistilos y las primeras capas de resina. La canopia se mantiene uniforme, permitiendo una distribución eficiente de la luz sobre todas las puntas. El consumo de agua y nutrientes sigue aumentando, reflejando la elevada demanda energética característica de esta etapa. Las plantas mantienen un crecimiento vigoroso y muestran una excelente adaptación a las condiciones de cultivo. ⚡ EC: 1.8 💧 pH: 6.2 - 6.5 🌡️ Agua: 21°C 🌫️ Humedad: 45–50% 💡 Intensidad: 1000–1050 PPFD 🔥 Nota de cultivo: La cuarta semana marca la transición entre el final del stretch y el inicio del engorde. Mantener un clima estable, una nutrición equilibrada y una intensidad lumínica constante será determinante para favorecer un desarrollo uniforme y maximizar el potencial de producción durante las próximas semanas. Seguimos creciendo fuerte 💪!
Likes
9
Share
Alright, so this girl is a little slow and she seems brittle, but i've just introduced some silica, so hopefully she beefens up a little.. Very unusual plant as you could see... thank you too @Grow4Releaf for the bean.. God bless everybody and Merry Christmas Christmas 🎄 🙏
Likes
149
Share
Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. I put some pictures on the construction here in week one. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable theme in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 8 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. Today I have put my seeds in my moisture dome and hope the seeds have germinated within a few days. I am very excited to see how the new growroom will work and how this Blue cheese Auto from Royal queen seeds will turn out. Blue Cheese automatic cannabis seeds are a cross of Blueberry Automatic and Cheese Automatic that has been perfected over five years of breeding and careful selection. The result is a feminized, autoflowering strain with superior yield, flavor, and effects to either of its distinguished parent strains. THC: 16% CBD: Low Yield Indoor : 325 - 375 gr/m2 Yield Outdoor: 60 - 110 gr/plant Height Indoor: 40 - 70 cm Height Outdoor: 60 - 110 cm Flowering: 7 - 8 weeks Harvest month: 9-10 weeks after planting Genetic Background: Blueberry x Cheese x Ruderalis Type: Sa 35% In 40% Ru 25% Effect: Cerebral and uplifting Climate: Mild ................................................................................................................................................................................................................................................................................ 2017-11-10. Week 12 day 3. Starting to see amber trichomes and will start flushing her today. Expecting to harvest two of the 3 girls in one week. Added pics.
Processing
Likes
20
Share
Start of week 6 of flowering. Plant 2, survived last week's heat stress and seems to be recovering well. With the new exhaust fan - vivosun 4 inch, 195cfm - my temps have not exceeded 35°c at any time I've spot checked. Hopefully no more issues or setbacks for the rest of this grow.
Processing
Likes
32
Share
@maddog767
Follow
hello guys..its bin a long week but my girls are here at week 5,,week 5 will be the last final week of veg an hopefully the results will be good as they look healthy right know...its my first time doing everything what am doing here and i have learn allot,,,GG4 is a stable strain just don't top lower then 5 sprouts you will get a slow growth...with the HESI NUTRIENTS,,, I AM FEEDING EVERY 2 OR 3 DAY,,,and i am still going with NO BURN...the only stress they pass was HEAT in the first 3 weeks of veg,TOPPING and LST....lets see what week 5 brings guys..as i always say feel free to ask anything about my grow anytime..😏🙏🙏🙏💪💪💪😎😎😎