Junto a otra hermana irán al aire libre, 2 indoor, 2 en exterior. Son mis primeras plantas de SWEETSEEDS. Espero que me salgan, como se ven en diferentes pag de las webs.

Runtz punch has sprouted and is about a week old. She has stretch a little too much so I increased the light strength some till she gets some growth on her and roots in the solution. Everything is looking good at the moment. Thank you Athena, Spider Farmer, and Herbies seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Off to a very impressive start!

Fine fioritu

Hey, there peeps! Apologies for not updating my diary as I have been quite busy balancing non-plant responsibilities -.-! Anyway, we are now on day 75 since I ordered my equipment and started germinating my seed and day 71 since I placed my seedling in her first Coco pot! She is now a staggering 4 foot 2 - which was overwhelming considering this is my first grow and orginally only cleared out 2/3 of my cuboard but now it uses the whole space but she's coming along so well! I have also added a LED Grow Light Full Spectrum 50W Red COB as I wanted some extra light for the bottom half nuggests. She is very healthy (I assume from the strong healthy roots) and hasnt shown any major defects other then the initial defects i encountered in week 2-3 and slight light burn on the top cola in week 7 which was from the plant growing so quickly and touching the light, but I did then adjust the light within 2-3 hours. What do you guys think and how did she get so tall consdiering she is an auto-flower and the strain is meant to be indica domiant?

Day 56f and week 8 and the girls are ripening up. Looking to harvest within the next 4 to 8 days. Just waiting for some more cloudy trichomes to show up. We've reduced our feeding to Canna Boost and Cannazyme only. For the last 4 days or so they will receive plain water. Really stoked how this girl has turned out so far and I can't wait to harvest her. Thank you everyone for likes and comments this far I so appreciate you guys. Growers love ✌️🏻-BLG Video- https://youtu.be/NVoXwpqe9AQ

Things are going fast, HulkBerry 1 look close to the end, I will start to wash it soon. I think the cookies gelato familly will end in something like 2 weeks, but not sure. Feel free to let me know what u think about. I got a real problem with the Royal Bluematic 2, buds are so small and weak. Not sure to bring it AT the end.

Sie wachsen täglich mehrere centimeter und das ist wirklich schön zu sehen, ich habe bis jetzt noch nie so schöne gesunde starke Pflanzen gesehen 😍 Ende Woche 3 habe ich entlaubt und lollipopped und sie haben nicht mal ein bisschen was an Stress empfunden, Ja ich behandle sie 2 mal am Tag Momentan und versuche ihnen alles zu geben was sie brauchen. Das Ergebnis sieht man 😎👌👍🍀 Ich habe 2 verschiedene Phenotypen aber sie scheinen alle mit der gleiche Behandlung zufrieden zu sein. Ab Woche 5 erhöhe ich den EC auf 1.8 Und so bleibt es bis Woche 7. Run off liegt bei 20 %, temp auf 28-29, täglich Gießen 1-2 mal Raucht einen guten bis zu nächste Woche Gute Menschen👌👍

This girl is exploding in the last weeks. The buds are getting so thick finally and our expectations for harvest are getting better than last week. We are not feeding her a lot as we already want her to suck up everything the soil already has. 👇 The weather here is also pretty humid, she is not showing signs of water lack. I would love to hear from anyone opinions on the maturation point. How ready is she? 🙌 This is our first time with a lens so we can't really tell just by looking at it. hope you enjoyed, see you next week! 😛😁 18-10 leaves are looking really bad, looking for some advice

Si bien la semana pasada puse que iba a hacer solo riego con agua como lavado de raices, note que no iba a ser suficiente, asi que hice un lavado de raices completo. Planta en la bañera y agua + agua +agua. Semana próxima cosecha! Excelentes resultados

Moving right along - the buds are starting to really fatten up and look hella juicy.... Was having a hard time keeping there humidity low - so I sprung for a small dehumidifier. Seems to be doing the trick. Very excited to go into there last month of flower!

Day 43 12/06/2021- Beginning of week five of flower. She should be done soon, she will also get her final feeding soon. Day 45 12/08/2021- She got her final top dress today from here on out she is on her own all I will do is water with pain water PH to 6.2-6.8 when dry. Day 47 12/10/2021- She is coming along nicely. Very frosty wish she wasn't a auto so I could of clone her for sure. Today she got a nice treat as it rain in my hometown and that's the water she got. Hoping she is ready by the end of the year. I know she looks funny but she was never topped either. Day 49 12/12/2021- End of the week, nothing new.

It's been a beautiful strain to work with, the flowrs are definitely worth it after all this time, the quality is definitely high. However this pheno of ak420 smells very different from the other 2 phenos I've grown along with her. The flowrs are beautiful, very solid and frosty nuggets, I smoked a few little nuggets when trimming but I'm excited to taste the big buds, hope you guys enjoyed the process. I want to say that this pheno #1 has a different smell compared to the other 2 phenotypes of ak420 that you can see here on my page as well, so stay tuned guys! Overall result is very nice, good quality, strong weed, sticky, stinky. I can say that it's very great and also you can get them for a very cheap price so it's a very good investment if you're looking for a powerful and affordable strain. Cheers growmies! ❤️💚💛💎👨‍🌾

She has entered her "flush" stage of low dose nutrients (as suggested by emerald harvest) and should wrap up in the next week to 10 days. Her smell is intoxicating and she is EXTREMELY sticky to the touch

Day 7, they didnt all pop but most of them did I think 2 didnt break the surface. Theyll get another week or so in the cup while some space opens up then go into 3 gal bags for a quick veg

☘️El 21/04 puse a hidratar la semilla por 24hs y luego la coloqué en papel con un poco de agua para empezar con su germinacion. ☘️22/04 - 24hs después germino y midió 1cm. ☘️Coloque la semilla germinada en una maceta que abarca 3L (la marca que utilizo en macetas es "Roots House"), es momentaño ese tamaño ya que me quede sin tierra suficiente para llenar una maceta de 10L como de costumbre. ☘️Le agregue AEGIS que es un producto natural compuesto por propagulos de hongos formadores de micorrizas. Estos se presentan como raicillas colonizadas del hongo y esporas. ☘️El sustrato que utilizó se llama "Nube Verde", su composición es de turba de categoría, perlita, humus, compost, tierra, dolomita y verticalidad. ☘️Voy a dejarla dos semanas en etapa de enraizamiento para que se pueda desarrollar de la forma correcta así la puedo pasar a crecimiento. ☘️25/04 - Cumple cuatro días de vida en total, ya mide 2,5cm de alto. ☘️En estos dias la estaré trasplantado en una maceta de 10L ya que ahora se encuentra en una de 3L. ☘️Salió muy rápido, por el momento viene de manera correcta. ☘️En estos dias estaré subiendo más imágenes! Podes seguirme en insta gram como @bruweed_arg !😶‍🌫️

2/10: I watered today with about 3/4 gallon each, plus cal-mag, signal, bembe, armor si, a little open sesame, and their final dose of endoboost. I took photos today, but forgot to snap a shot of the Soooperrunt. She's as tall as the short one now, just not as bushy. I think she'll make a fair amount of bud despite her sloooow start, smaller stature, and smaller pot. The tall one is keeping pace with the biggest plants in the garden. 2/11: Wife home sick today....postponing construction project to raise the lights....kinda scary....about 10"-12" from the tops now.. 2/12: I woke up to find the tallest of these bitches stretched another few inches and within 9 inches of the lights!!! I quickly drug everybody out of the closet and undertook the project. In addition to that project, I installed and hooked up my new AC Infinity 6" intake fan. It's pulling in fresh air from the soffit vent on the eave of the attic, and currently feeding the garden with 46f fresh air. I'm able to easily maintain daytime temps in the lower 70f's now. I am able to drive the nighttime temps as low as I want. The only issue is that the outdoor RH varies quite a bit, so I ordered a 30-pint dehumidifier to put in the top of the closet. It will battle with the evaporative cooler while the lights are on to keep it at 45% RH, but after the lights go off, it will lower the RH to 35% unti morning. After another couple of weeks, I'll kill the evap cooler altogether and try to maintain 35% RH 24/7. I'm optimistic that it will be the difference-maker in maintaining lower RH while I'm flushing all the plants during the last couple of weeks. That's usually such a challenge...especially with a bunch of 5 gallon pots. I also sprayed everybody with boomboom spray to try and mitigate the light burn damage that is likely to ensue. 2/13: Still stretching... about 12" from the lights again. I will wait to raise the lights until tomorrow when I feed them. I'm seeing calcium deficiency on a few plants, including a #9. Will up the dose tomorrow when I feed. 2/14: I fed them today with about 3/4 gallon each including grow big, big bloom, tiger bloom, cal-mag, signal, bembe, humic acid, and I switched over from Open Sesame to Beastie Bloomz. Raised the lights another couple of inches. I did some training on them and defo'd a little bit. 2/15: Installed the new dehumidifier and rigged the continuous drain on it...works great. 2/16: I rotated the edge plants and removed some old leaves. I added another 22w 3000k 4' bar light under the canopy. 2/17: I rearranged the garden and defoliated a little bit. That's it for week 8-

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Hey now, hope everyone is having a great weekend and staying safe. Another great week for the ladies, as they are now about 3 weeks into flower, and the stretch has just finished. I am still feeding them silica, cal mag, and flower nutrients maxi bloom by GHE. I did start to add a PK booster this week pushing the EC up to 1.4. I also will be switched the light from V1 to the F1 Spectrum at the beginning of this week, and will be integrating the UV/IR bar into the light cycle later this week. I will run the UV/IR bar for approximately 30 minutes prior to lights off to get started. The tallest plants are the Sundae Driver and the Durban Nights at 42" and the Red Hot Cookies is the shortest plant at 38" however they all look happy and healthy and capable of easily giving up a half pound each. The 5X5 is really starting to fill up nicely, I am running two dehumidifiers outside of the tent and I am able to maintain around 50% RH in the tent during lights on, and around 55% RH with lights off. We did get an unexpected heat wave this weekend and it has been a struggle keeping the heat and humidity down but the flowers are just starting so no need to worry about mold or anything like that yet. As soon as this heat wave is over the temps should be good to go the rest of the way this is by far the best time of year to be flowering plants in my region. I did defoliate twice this week and I may do one or two more rounds before just letting them do their thing. Not much to do from here on out except make sure the reservoir is full and the PH is in the proper range. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled