Week4 5-6 Day 22 Flowers, right around the corner. Just readjusted LST, tad behind. Maybe made a boo boo. Maybe not. But I did drop her on her head week 1. 😵 Time will tell, either way, I'll finish her. I've been all over this grow. Wind burn, clawing, maybe stunt. Hahaha the fun of growing and learning. Eco 30%. Claw fix in progress. Happy Growing!

Looking good :)

20 Weeks Total 12 Flower Weeks Harvest HARVEST - 12 Weeks, 4 Days - 2022-11-21T20:00:00-0600 Today (chop) is the 14th day since moving to 18/6. The Foxtailing of the top flowers indicates 1) light stress, 2) Reveg . . .?
 Even with 18/6 and TWO full weeks beyond week 10, I’d have waited another 7-10 days to ripen the Trichomes to my liking (>1/3 w/ vanishing abscission). As is - I know we’ve more mass - they’re both trichome laden - the smoke test will tell. Phenos #7 “Broader Leaved” demonstrated moderate inter-nodal spacing, stacking buds put to the terminal flower(s). Flowers started as tiny ‘sunbursts’ of pistols in the common form for broad leaved plants in general. She branched significantly more than I expected - the buds along each mainline cola are on a small stem that’s 1/2” - 3” long, with a 1.5” to 2” bud attached. The buds spiral up the cola, starting (with varying internal spaces) Ambassador Cartwright Ambassador Cartwright by IRIE Genetics Transition to Flower Afterglow X Arise (Clementine X Arise) X Arise -> Afterglow BX1? ((Tangie X Lemon Skunk) X Arise) X Arise ______________________________________ Start of Week: Saturday 19 November AC3Q 120:F:13:1 to Friday 25 November AC3Q 126:F:13:7 Summary: Plant HeightBeginningOfWeek: [ 33, in] Plant HeightEndOfWeek: [ 33 in] Temp: 74.8 RH: 70.7 VPD: 0.88 kPa # need to get into the 0.9 -> 1.1 Early Flower LightSchedule: 18/6 amt: [ 1750, ml] # period: [ 9, hrs] frequency: [2, day] times: { first: 2100, second: 0300 } # Auto Only!!! Otherwise 1.3 @ 2100 Environment: EC Targets: # rel. | abs (rel + source) ECripen: [ 0.3, 0.6] [ 0.6, 0.9] ECflush: [ 0.0, 0.2] Fertigation Daily: - Times; {2100h, 0600h} - {pid: 4, amt: 1250 ml, ec: 0.6, pHRange: [ 5.5, 6.5], times: [2030h, 0500h]} - {pid: 7, amt: 1250 ml, ec: 0.6, pHRange: [ 5.5, 6.5], times: [2030h, 0500h]} Fertigation: # Mammoth-P: [ 1.5, ml] BioAgFullPower: [ 10, ml] (The Rooted Leaf) Resin Bloom [ 3, ml]; # Potassium & Plant Extracts _____ Saturday 19 November 2022 AC3Q 120:F:13:1 - [x] AM - EC 0.6 - [x] PM - EC 0.6, 1000 ml (local: sun am) Sunday 20 November 2022 AC3Q 121:F:13:2 - [ ] PM - EC 0.6 - [x] AM - EC 0.6 Monday 21 November 2022 AC3Q 122:F:13:3 | HARVEST CHOP 87 Flower Days Tuesday 22 November 2022 AC3Q 123:F:13:4 88 Days in Flower Wednesday 23 November 2022 AC3Q 124:F:13:5 Thursday 24 November 2022 - Happy Thanksgiving!!! AC3Q 125:F:13:6 Friday 25 November 2022 AC3Q 126:F:13:7

By this time I’ve nearly completely defoliate everything below the net, and all fan leaves have been removed. I’ve stopped tucking them plant under the net as vertical growth seems to have slowed. The buds are fattening up nicely under the AGLEX 2000w cob with a belly full of Remo Nutrients

Welcome to Flower Week 5 of SuperStrains OreoZ I'm excited to share my grow journey with you from my SuperStrains Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain OreoZ: Here’s what I’m working with: • 🌱 Tent: 225x150x150 • 🧑‍🌾 Breeder Company: SuperStrains • 💧 Humidity Range: 50 • ⏳ Flowering Time: 8-9 Weeks • Strain Info: 22%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 20 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to SuperStrains for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore side by side with theyre Hy-Pro Nutriets . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Moin, kurzer Stand der Dinge: Hier drinnen aktuell ordentlich warm, bis 30 Grad in der Box, aber alles noch entspannt und unter Kontrolle. Die Ladys riechen momentan extrem — fast so wie meine Achseln bei dem Wetter. Sie werden richtig schön harzig, mehr als vorher, und legen gut an Masse zu. So langsam fangen die Blätter an gelb zu werden, sie ziehen sich ihre letzten Reserven. Man merkt, es geht langsam dem Ende entgegen. Die FBC zeigt schon überall ein bisschen Bernstein. Ich geb den Mädels insgesamt noch so zwei Wochen, mal gucken, was noch geht.

8th week of flowering starts now. Flowers are very big and sticky, a few trichs have that milky tint and I already noticed ambered ones. I started flushing but I’m facing issue to remove the runaway water from cups. 7 plants for that size was a bit too much for a first. But that’s a lesson for future grows ! Humidity is also very hard to keep under control as I live in a very humid area. Flushing doesn’t help and I definitely have to invest in a good dehumidifier for next grow. A few small buds, with skinny stem started to bend because of buds weight.

Hello All! I'm BACK! I took a month off and I am so ready to get back to growing. I am adding a couple of things this grow different from my last. So look for some of the new things I am implementing. For starters! This time I will be growing from a seed. I purchased my seeds from Seed Supreme. The strain I will be growing this time is going to be SKunk#1. The Skunk#1 that i am growing this time is an Auto Flower. Two things are already different. Germinating from a seed, and growing an AutoFlower. 10/30/23 - Day 1 - Right now I chose to setup my heat mat, put the dome over the mat and put the water cup on the mat. I'm going to let the seed soak for 24 hrs. Tomorrow ill pull it out and put it in a damp cloth in side the dome with the heat pad. 10/31/23 - Day 2 - Happy Halloween yall! This is a good sign, less than 24hrs and the seed has already started to open. I got a paper towel wet, and I moved the seed to the paper towel. Ill keep her in the wet, paper towl. In the cup. Thats on the heat mat under the dome. Important to note, the heat mat is set for 120deg. Its off the ground on a table. I leave it on 24/7 during this whole process. 11/1/23 - Day 3 - I'm Really impressed. She already popped and sprouted a tail! I'm going to wait until her tail is sticking out a lot more before moving her to the LEAF box. So a couple of things got done today. I wanted to set up my Leaf box differently this time. Last grow I use the manual options for water and humidity. I was the person who would refill the water and the humidifier. This time I ran all the correct PVC to allow the Leaf Box to use the automatic process. I should be able to be super hands-off this time. I have an RO water system that I set up to feed the Leaf Box. I posted a Video of me taking the seed and planting it into Rockwool. I could start the Leaf box up now, but I want the seed to grow a bit more. Right now it's still on a hot mat, with plenty of water. I also added some Root Armor. 11/2/23 - Day 4 - The top of the seed is already starting to poke out. This seed has no chill.

Flowering day 7 since time change to 12/12 h. Hey guys :-) The flowering started last week because otherwise the space in the small tent would end up being too narrow :-) Cuttings were taken from each phenotype beforehand. To change the flower, I rinsed it very lightly with clean fruits. With the next watering she gets a mix of grow liquid and bloom liquid before she only gets bloom. The heating mat works perfectly in the small tent and the parameters are all in the optimal range 🙏🏻👍. Now we hope that everything stays that way and that the cold days will slowly pass :-) . Everything was cleaned and checked. have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Always cool to see what old school strains are all about. If there’s something experience has taught me is that classics are classics for a reason, and that’s the theme of this cycle. The germination was exceptionally fast, followed by the development of a thick stalk and huge broad leafs, this Gorilla surely started strong. Humidity and temperature kept fairly high throughout the week (70%/ 24°C), with regular misting, which they love! So far so good, feels like a happy and healthy seedling. Let’s see what she’s got 💪🌱

Week 13! We made it to harvest! The buds are looking gorgeous..bright green super crystally from that 48 hours of darkness prior..and oh so many hints of purple all thanks to my efforts of cooling down temps at night. Smelling absolutely dank right after drying which was a nice teaser for me when I get to finally smoke her! I have two plants chopped one is still drying and I’ll probably add one more photo because it had one fat cola that needs to be shared LOL! Unfortunately this plant was 6 grams short of giving me 2 full ounces but i’m still learning and they weren’t trained at all and I’m happy with the result! I think the plant still hanging will give me an ounce or less..it was my corner plant that didn’t get much tending. What a fun strain to grow will update on the smoke eventually!

7 jours actuellement 19/10/24 Elle est devenue beaucoup plus violette et son odeur intensifie et changeante, on voit des signe de développement, lent mais ça pousse J’espère que la reveg va bien prendre

Hello. This is the first week of flowering. I took some clones... and I'll explain.... I don't like the plastic domes that fit over the trays, because, the plants wilt when they don't get enough rh To make roots faster, cannabis prefers 90% to 95% rh for the first week, and cannabis prefers florescent lights no farther than 4 inches away left on for the first week. Cannabis stores it's energy in it's roots so it can sleep. So if it doesn't have roots yet, it can't store it's energy. so keep the light on. The second week you can give the 6 hour dark period and 80% to 85% rh, so push the lid open a bit more the second week. And then the 3rd week take the lids off. If the clones wilt, put the lids back on for a few more days. Keep the temp around 22*c to 24*c , Cannabis won't make clone roots, if it's too hot, over 27*c, or too cold, under 18*c. Not too hard. Oh Yes... spray them twice a day with 1/4 strength nutrient, and use RO water for everything because it low in root rot fungus spores. OK... I'll put the plant in the 10'x10' tent each night for 3 weeks, to force flowering. and I'd like to harvest around Sept 15. The plant is growing well. OK. Be Great. Chuck.

week 11 here with the update video

Installed some fans to keep the air moving.

Good week, noticed I mutant plant out of all the strains I started. These are good to go .so far plants are really healthy and happy. Just did the sort transplant from 4.5 inch pots to 5 gallon pots.

Heavy defoliation this week as it’s starting to show its signs of pre flowering stage. Huge growth last couple weeks and excited to see how they continue to grow. 💚 This is the way

Hi there. Here’s a few photos and videos over the past few weeks. I transplanted the Wedding Cheesecake Fast Flowering ladies outdoors around May 24th. A little sooner than I had planned, but they were starting to get root bound in their starter containers. They have been exploding with growth since the transplant. The larger plant is already 4’ tall and the shorter one is 39”. Fast Buds website says up to 3 Meters (10 Feet) outdoors. At this pace they might exceed that!!!👍👍