Update of Goofiez 2 !! It’s incredible this strain is so strong and fast grow !! Stay tu ed

Day 63 - lookin good.... haha.... um, tanks stabilized, ph 5.8 - ppm 1200 .... she's feedin alot..... buds are fillin and lotsa white furries.... listed the nutes and amounts etc.., but i'm kinda feeding her as she needs.... so every few days she is drinking 2 lts +- and i'm just mixing up a neut solution in a 2 lt bottle every day or 2 ..... sometimes she just wants abit of water...... Day 64 +vid....shows her deep green and gloss... abit of crystalic :) Day 65 - vids pics.... trimmed her, and abit of bending.... Added blood and bone.... she's stretching alot, 60cm+ ........ Day 67 took all the early buds on all the stringy 0ff shoots.... Poor lighting vids, but don't want to mess with her flowering, :) 👍😎👊

*=UPDATE=* Smoke Report *=UPDATE=* Harvest Totals **Smoke Report and effects** to follow after cure, May 10th ish. This was my second ever indoor grow, and compared to my last grow I have learned a lot. My goal this time was to get about 1.5-2oz a plant, up from my previous goal of 1oz a plant from last grow. Best part is I got to my goal!!😁 Next goal will be 2oz+ a plant. This was the last time I will be using my homemade grow tent, it was compromised out of recycled Styrofoam, miss-tint paint and glue, it provided me what I needed to get the job done one a extreme budget but it is preventing me from doing more. The main problem I ran into this grow was humidity control/space. The fan broke half way through and I was too lazy to get a new one as I figured I'll wait till I get a real tent. This mind set enabled some mould to flourish and that is why I had to harvest early. I felt if I let the plants go 2 more weeks, I would have hit 2oz a plant, it was only a few grams away, however if I kept going with the mould I would have been down to 1oz after all the rot was cut out from both plants, that shit fucks up your grow fast if you don't manage your air circulation. So the main things I learned: 1) I was underfeeding my plants in there 2nd half of life, thus the buds from the previous grows and this one suffered a bit. This grow does have the most dense buds I have ever grown, but it could have been better. 2) PH is key, I still did not have a PH meter but was blindly altering the PH of my water by adding in some citric acid, not only to neutralize the chlorine but also lower the PH a bit. When I did test the soils PH using a soil testing kit, it was lower then previous grows. This helped get more nutrients into the plants and grow bigger. previous grows the PH was 7-7,5 ish 3) You can get an "ok" harvest off of blue lights, my grow was under seven 18" 6500k 18w sunblaster LEDs, and I thought they would never get over 1oz a plant because they don't have the best spectrum for cannabis in flower, among the other dumb things I do as a novice grower. but they worked out just fine, still going to upgrade in time with proper lighting in the 3500k range. 4) Once the plants get bigger and buds start to becoming more dense, the air circulation is needed, its is not longer optional for a budget grow in a shity homemade tent. 5) Defoliation works. my plants have ruffly the same amount of buds, however the plant that I fiddled around with mainlining and defoliation had bigger fatter buds vs popcorn nugs like the opposite plant. 6) Fungas gnats are annoying, fuck them, use nematodes to kill them flat in there tracks. 7) Getting better at making edibles. :) So other then that, the only real differences between this is last grow is lower PH in tap water, more lights, slightly bigger pots, bit more feed and different genetics from a different breeder. I followed everything else ruffly the same. My own hydro break down from lights alone is below. I did not notice any big difference between the two plants and there phenotypes, I was meaning to take a clone and try and grow it outdoors again but forgot and that was my last of the seeds. I was surprised that one of them was a male. not even hermi, full blown male. I'm not into breeding or I would have kept him, Yields: Plant # 1 - male, killed Plant # 2 - 42.1g bud, 13.15g trim (1 .49oz, 0.46oz) bigger fatter buds Plant # 3 - 45.1g bud, 13.15g trim (1.59oz, 0.46oz) smaller nugs, almost all popcorn. =Overall - 87.2g total bud, ave 43.6g a plant. 26.3g trim ave 13.15g a plant. Smells: plants 2-3 - both smelled the same, in the beginning they had a lovely sexy lemon sent, then in the end it just turned into something else, I think some of the moulds in the tent altered it a bit. Will wait till after cure to see what its like, I noticed some changes in just drying and having them in the jars for two days now. Now that the cure is all done and finished the two strains smell a bit different in there respective jars but there smoke is almost identical. plant #2 or pheno #1 is more of a classic OG Kush smell to me, its earthy, herbal and pungent. Hints of pine in there with lemon bit woody. plant #3 or pheno #2 is more of a bright one, It's sweet smelling with berries in it, some hints of almost floral like in it, not quite rose or lavender something else, not what I was expecting at all. I like this smell better vs the other plant. Smoke Report It took its sweet time but I finally got it in. I myself do not smoke, so I relay on my roomie for this part of the report, they are a long time smoker 10+ years. They have reported that the smoke smooth and easy going, they would say it was a bit smoother then my previous grow of OK Kush CBD and Blackberry. the only noticeable differences between the different phenos is that pheno #1 is more pungent that phoneo #2 but over all the smokes flavours and quality are the same just brighter in phone #2, I feel these are a bit off from the original seeds I grew back in the day from my first ever grow but still high quality. this was rated as a equal balance of sativa and indica feels on smoking but the smells where leaning towards sativa a bit. m0use +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Cost + Time Analysis Of Growing Cannabis. m0use’s Breakdown +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Light Schedule === growth: 18h on 6h off flower: 12h on 12hr off GROWTH: 35days 5am-11pm-on -- 11pm-5am-off --- Cost of kwh with on-peak "20.8c", mid-peak "14.4c" and off-peak "10.1c". 5am - 7am -- 2hr @10.1c/kwh off-peak 7am - 11am -- 4hr @20.8c/kwh on-peak 11am - 5pm --6hr @14.4c/kwh mid-peak 5pm - 7pm -- 2hr @20.8c/kwh on-peak 7pm - 11pm -- 4hr @10.1c/Kwh off-peak --- 6h @10.1c/kwh 6h @20.8c/kwh 6h @14.4c/kwh --- Using the previous c/kwh numbers above I can find out the daily cost of the lamps in the 3 peak periods. growth and flower 6h x 10.1c/kwh = 60.6c/kw * .126 kw = 7.64c off-peak 6h x 20.8c/kwh = 124.8c/kw * .126 kw = 15.72c on-peak 6h x 14.4c/kwh = 86.4c/kw * .126 kw = 10.89 c mid-peak The "h" hours and "kw" kilowatts cancel out and we are left with a value of "c" cents per peak period add all the peak periods up and you get your cost of running the lights in cents per day c/d --- growth : 7.64c + 15.72c + 10.89c = 34.25c/d FLOWER: 52days === 8am-8pm-on -- 8pm-8am-off --- Cost of kwh with on-peak "20.8c", mid-peak "14.4c" and off-peak "10.1c". 5am - 7am -- 0hr @10.1c/kwh off-peak 8am - 11am -- 3hr @20.8c/kwh on-peak 11am - 5pm --6hr @14.4c/kwh mid-peak 5pm - 7pm -- 2hr @20.8c/kwh on-peak 7pm - 8pm -- 1hr @10.1c/Kwh off-peak --- 1h @10.1c/kwh 5h @20.8c/kwh 6h @14.4c/kwh --- Using the previous c/kwh numbers above I can find out the daily cost of the lamps in the 3 peak periods. growth and flower 1h x 10.1c/kwh = 10.1c/kw * .126 kw = 1.27c off-peak 5h x 20.8c/kwh = 104c/kw * .126 kw = 13.10c on-peak 6h x 14.4c/kwh = 86.4c/kw * .126 kw = 7.77c mid-peak The "h" hours and "kw" kilowatts cancel out and we are left with a value of "c" cents per peak period add all the peak periods up and you get your cost of running the lights in cents per day c/d --- flower : 1.27c + 13.10c + 7.77c = 22.14c/d Lights === LED’s I use are 18w each and I have 7 lamps on an aray. 18w*7 = 126w | 126w/1000 = 0.126Kw growth: 18h/d lights on * .126kw lights hydro use = 2.27kw/d flower: 12h/d lights on *.126kw lights hydro use = 1.51kw/d G:79.45 + F:78.52 = 157.97kw for the entire grow. Cost growth : 7.64c + 15.72c + 10.89c = 34.25c/d flower : 1.27c + 13.10c + 7.77c = 22.14c/d The time my lights where on in the grow for 12 weeks and 1 day, or 85 days. growth: 35d * 34.25c/d = 1,198.75c ÷ 100 "100c in a dollar" = .99 flower: 52d * 22.14c/d = 1,152.28c ÷ 100 "100c in a dollar" = .52 the "d" days cancel out and we are left with a total cost of the lights for my 85day grow. 11.99 + 11.52 = .51 Using the regular calculation of grams harvested divided by watts used is not accurate to me, it does not account for all the time the lamps are on, the length of grow to the over all cost. The calculation that makes sense to me is this, harvested dry weight of usable cannabis buds/trim/keif/whatever in grams divided by total kw used. Could also combine it with grams per total single use costs “anything you used only for this grow and wont reuse in the next, or fractions of multi use items like fertilizers if they ½ full” and see how much you’re investing per gram. "kw" ÷ "g" = kw/g "$" ÷ "g" = $/g I have harvested 4oz or 113.5g on 157.97kw, this includes buds and trim in mycase. 157.97kw ÷ 113.5g = 1.39kw/g of usable cannabis. I’d still try and aim for under 1kw/g. .51 ÷ 113.5g = :text.20g The other ratio would have been, 113.5g to 126w = 0.9g/w just shy of the 1 mark. So in total, it cost me 20c per 1g I grew in light electricity alone. Not to bad. legend, kwh = kilowatt per hour kw = kilowatt w = watt h = hour c = cents $ = dollars d = day LED= Light Emitting Diode

27/05 - Day 1 of Veg(1L of Nutrients dissolved in water poured into the tray) 1/06 - Day 6 added toothpick to help give support 2/06 - Day 7 checked on their root development, so I can transplant (Tomorrow we transplant)

Not an overly impressive strain and I would say she was not that hard to grow. If I even grew this one again I would let it go naturally with some LST. Wanted more grape flavours but they don't really come through in the smoke. There's a bit of a sharp fruity smell that's sort of piney with a hint of fuel at the end. The smoke is not too flavourful in my opinion but that just means I didn't grow it well. Super tight nugs so be careful with humidity as stated above. Also she's a bit of a light feeder so be careful with your nutes. As you can see I burnt her tips and over fed her a lot. Not a bad yield though! I've only really smoked the lowers on this one so far so that gave me a bit of a racey high, just slightly racey. I would accredit that to the lowers not being mature enough at chop. The plant is super dense and since I mainlined it the lowers didn't receive enough light. I tried to let the lowers mature more but the plant stopped maturing when I chopped the tops, this caused stress and the plant just shut down basically. Not sure if I would grow Blimburn's GDP again until I grow the real GDP.

January 26, 2021 (Week 3, Day 22): Today ended up being an unexpectedly big day. This morning when I checked on the plants, they'd grown another 1.5" over the last 24 hours. They're basically growing out of control at this point. Every plant had a fully developed sixth node that was beginning to unfurl. So I decided to water the plants with 1000ml + 4ml pH Perfect Bloom + 4ml pH Perfect Grow + 1.5ml Cal-Mag Plus + 5 drops of pH down (6.5 pH solution). After that I took the plants out from the tent and began the topping process. I was pretty nervous about getting the snip in the right spot, but I think I've done it correctly. I topped each plant at the third node, then I cleaned all the growth below the node. After that I used rubber-coated garden wire to tie the growth sites to the fan leaves to promote lateral growth. Unknown 2 is definitely the runt of the group and my manipulation of the plant really pissed it off and it started to go kind of limp, so I decided to add a little extra support to the plant until it gets a bit hardier. I think it will take several days for it to recover from this process. The other plants however seem very strong and took the topping like a couple of champions. Gelato 1 and Unknown 1 seem to have great genetics and they haven't skipped a beat since germination. I decided to ditch Unknown 2's top but took clones of the other two plants. This process is flying by so far. Fingers crossed the plants continue to thrive even after my butchering. I've adjusted the humidity in the tent so were now averaging 65% rH and 77℉. Hopefully no other news today! January 27, 2021 (Week 3, Day 23): 24-hours post-top and all the plants have perked back up and I am already seeing growth from the two nodes I left on each plant. I added simple binder clips to the outside of my pot and redid the training on Unknown 2. Since topping, Unknown 2 went from pissed off to happier than ever. However, I have finally run into my first problem. The leaves on all three plants are starting to blotch. I touched one of the blotchy spots and it was crisp and began to crack. Soil is still moist from the watering yesterday. Other than irregular spots, I can't seem to find anything else wrong with the plants. I have a Vivosun pH meter which I've heard can be junk - so I am kind of suspecting my pH is too low. But I'm going to post up a grow question today to get a couple of other opinions. Plants still seem really healthy even with these blotchy patches on their leaves. Averaging 65% rH and 78℉. *Update: The damage on the leaves of the plants started to progress - so instead of waiting around watching my plants get crunchy, I decided to take action. I just flushed all three plants with 4 liters (1 gallon) each of filtered water pH'd to ~6.0. I am getting runoff of around ~6.5-6.6 which tells me the soil is too basic or alkaline. I had read this soil I am using is acidic, so I was feeding with a ~6.5pH solution. From now on I will feed with a ~6.0pH solution instead in an attempt to avoid these pH fluctuations. Before flushing with pH'd water, I tested the soil and all were sitting around ~7.1-7.2 pH. Obviously too high. Got tons of runoff by flushing. Here's to hoping we'll see a difference in leaf texture and color in the next 24-48 hours. This pH problem reared its head at an ugly time since I just decided to top the plants. I think I'll be sure to water with 10-20% runoff from now on so I can keep an eye on the pH regularly. January 28, 2021 (Week 3, Day 24): The last 24 hours were a little scary. As a new grower I wasn't really sure what to expect, and this was my first major challenge. All three plants are now scarred on the main fan leaves due to my inexperience. Gelato 1 looks like it took the worst of it. After flushing yesterday I noticed the progression of the leaf damage stopped almost immediately. Then the leaves began to fill in the crunchy green spots with bright orange around the edges with brown in the middle. It was really strange to watch. The leaves on all the plants are supple, they're just striped with ugly orange and brown scars. It also seems like even with the problems, the plants are continuing to thrive and grow at a surprising rate. Even with the fluctuation in pH and the flush I didn't see drooping from any of the plants. So they seem healthy despite their appearance. In fact, Unknown 1's fan leaves are so happy I've had to pin them down as I was getting too much vertical growth from the cola tips. I think I may have flushed at just the right time. I've never seen something progress on a plant so quickly before. The new growth on the plants seems perfectly healthy without any mottling or spotting. The second node of each growth tip on each plant is starting to unfurl already. All the stems are fattening up as well. It was the first night of 20/4 lighting schedule. Temperature dipped to 70℉ with the light off, but the humidity stayed constant. Average of 65% rH and 75℉. Hopefully we'll continue to see good progress with the new growth over the next several days. Once I top the second set of growth tips I'll most likely clip these ugly fan leaves so they'll stop taunting my inexperience every time I open my tent. 💀 January 29, 2021 (Week 3, Day 25): Seems like the plants are back to growing extremely fast. The scars are getting brighter and the brown parts in the middle have went from crispy to semi-supple. The new growth is bright green and even in color. I had to retrain every plant this morning to keep vertical growth from the growth sites tied against the fan leaf stem. I had to use a second set of ties to tie the second node down. So far my training seems to be working. All plants are working on their third nodes on both growth stems. I'll top once the fourth node begins to develop. The medium is still very moist from the flush two days ago. I don't anticipate having to water for two or three more days. I want the medium to dry out almost completely before I water again. I'll continue with light nutrients - but I'll make sure to run my pH down to 6.0 and I'll also be upping the feedings to 2.5-3l per plant to attain some testable runoff. My new Aperta pH meter showed up yesterday, so I hope to have more accurate readings going forward. Averaging 65% rH and 76℉. Nothing else for today. January 30, 2021 (Week 3, Day 26): Growth sites are stretching nicely along the fan leaf stem. Retrained in a few areas. Noticing slight blotching on Unknown 1's growth. Also seems very dark green with slight burn and dropping at the tips. Conducted soil slurry test and came back around ~6.8 pH. I am suspecting slight nitrogen excess. PPM was very high for this stage at around 1200. Next watering I will skip nutrients as I think the roots are beginning to expand through the pots extensively and may have access to too much nitrogen. Growth is still looking nice and fast. Plants are stretching a bit more with the 4 hours of darkness per night. Averaging 65% rH and 76℉. January 31, 2021 (Week 3, Day 27): The nodes on the main stem of every plant are beginning to swell considerably. Growth sites on all three plants are beginning to unfurl their third node. The nutrient burn on Unknown 1 isn't getting any better, but it also doesn't seem to be progressing. I'm hoping it's just a very slight excess, as it doesn't appear to be slowing down growth or causing any major issues. Gelato 1 and Unknown 2 are thriving and new growth looks perfect. I think the genetics on Unknown 1 may be a little more sensitive to nutrients. Unfortunately since I don't know what the plants are, it has made researching strain tips kind of difficult, so I've been treating every plant the same. The Gelato seems the healthiest of the three plants and is growing vigorously. Because of the training it's starting to look like a salad. I'll go for vertical growth after I perform the second topping. I don't plan on having these plants any taller than about 3 feet, so I anticipate having to switch to flower around week 6 or 7. If the growth keeps up, maybe even sooner. I retrained all the plants today and pinned down Unknown 1's fan leaves to encourage horizontal growth. The cola stems are getting huge and I was able to take off my first set of training braces. I also switched Unknown 1 and Unknown 2 in the tent to promote even growth. Medium is still moist from the flush several days ago. I'll water in a day or two. Averaging 65% rH and 75℉. February 1, 2021 (Week 3, Day 28): Medium was pretty dry this morning. Watered 6.0 pH 2 liters per plant with 2.5ml/l Cal-Mag + pH Down and without other nutrients. I think I'll hold off until flower to give nutrients to the plant again. I was getting very high PPM readouts during my flush, so I think the plants have plenty of food to get through the next three weeks. Just giving a small Cal-Mag supplement each feeding. Got about 10% runoff per plant. Runoff sitting around ~6.7-6.8 pH. Still pretty high, but I am hoping continually watering with a 6.0 pH solution will slowly lower the pH of the root-zone. Plants are growing quickly and I had to pin down the third node on each stem today. All of them are looking more like a salad every day. Fourth node is almost completely out - I'll wait for it to unfurl and top either tomorrow or the next day. Plants are looking good. Unknown 1 still looks to have a slight nitrogen toxicity, but doesn't seem to be affecting the plant's health much. Averaging 65% rH and 77℉ Nothing else to report. Looking forward to next week - the second and last topping will happen in the next few days. After the stems grow horizontally enough I'll switch to vertical growth. I'll aim for about 14" tall and then switch over to flower. Hoping that will be around week 6. Just picked up some awesome flowering powder I am excited to try in a few weeks. Plants are chugging right along! Happy growing everyone! 👽

Day 52 - before pic/vid pulled em both out scrubbed tanks..... moved em into a different tent, with a different light.... did up completely different solutions, and currently still building it all.... Day 53 - still buildin... vids of new home... Nutrifield, Rock Nitro, 1200-1500 ppm and 6.5 PH.... see if we can give em a good boost.... left em in pure water before puttin em in new solution.... Day 57 - pics vid.... been adjusting ph... down to 5.8.... they are just growin along nicely in the new home... got a fan for the tent... looks good tho... solution temp is abit high, fan will fix that..... changed just the tanks to 5lt Cereal containers, they are alot taller, more room below the container... fits perfect.... Day 59 - pics vids, , 6.2ph, 1300ppm ... water temps been getting abit high, fans should arrive next week.... 👍😎 120W Aluminum+PC Plug 2835SMD 7995-9594LM 1131Pcs Red+234Pcs Blue * Blue(wavelength: 430nm, 554nm * Red(wavelength: 630nm 660nm)

The GSC took off this week on a stretch and are looking really sativary long and pointy . Flushed again this week and will start sneaking in some bloom nutes once the stretch is done .

Sugar leaves turning yellow and bottom leaves starting to turn as well. She put on some weight this week. She smells absolutely amazing and is super sticky.

Started under 40w led light.

Good week all branches tied and bottoms caught up quote small and bushy with quite a few node sites. Try update some better photos soon. Just switched to 12/12 today, been running 600hps was goin to add another but heats alittle much so ive added two 1000w led photos to follow. Hoping to fill out room more withjn a few weeks of stretch to 12/12.

Hello everyone, It seems the blueberry glue is in her last week of flower, today was her second day of heavy watering 12 liters reverse osmosewater. When i was shooting the video i forgot to turn of the adlite i will try to make a new video tomorrow. Thanks for stopping by and have a nice day. Best regards, Growfather

I started germination of 2 Jack F1 beans on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up. Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their new home. Cant wait! Just some background information on my last run with the Jack f1. It was relatively strong during veg. But was middle of the pack in size after the 6 weeks of vegetative growth. After the flower stretch she became the largest quick! With a enormous stretch rate of 300%... Yes she tripled in size. Forcing me too super crop her which she didnt like at all. Setting her back and definitely hurting her all around yeild. Despite the staggering, unexpected stretch amount. Leading to the stress inducing supercropping. She still pulled off immaculate bud structre, density, and trichome production. She just took much longer than she should have... and didnt pack on the whopper size buds I'd expect out of these genetics. Definitely learned alot out of my first go. So I'm amped for the second run with this variety. This time around I'm going to anticipate the stretch and cut veg time shorter. To roughly 4 weeks or 1 ft in height. Also utilize a bit of very light lst to their side branching to open them up a little bit. Without stressing them out... well hopefully.

Hi everyone 🤗. The last 5 women are nearing their end 😍. They will be harvested in the next 2-3 weeks. The rest of the ones that have already been harvested are currently fermenting 😍. The finished harvest pictures come when everyone is finished together 👍. This ends the last diary that was kept with several varieties. From now on only single strain diaries are coming, all individually ;-). I wish you a nice week, stay healthy 🙏🏻 and let it grow 🌱

This is the start of week 5 ! Looking like i going to top Obi#1 soon shes getting a big thick canopy on her and shes's doing great ! Obi#2 is catching up slowly but surely she's going to be a big beautiful lady as well !! Things are going well in the lab not to many prolblems I fixed the humididy to above 50 % now so we are rocking and rolling ! <3 Thanks for showing me some love ladies and gents makes me feel appreciated for what I do . Stay tuned and remember to check my diaries daily !!!! -Happy Growing!

Defoliación leve🍀👨‍🌾🏻

What a plant this is.. im blown away im on 8 tops compared to 4 on my other 3 diff strains and already bounced bk and going for more! Happy plants guys!

another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!

Day 2 in the pots they came out beautifully with their seed as a hat! Day 4 they were all 3 1cm out of the ground, they were born! Day 6 is almost over today and 2/3 seeds go delicious. Both of them already have their first set of real leaves and you can see the next set coming, oewhhh. Unfortunately there is one that I think is less gene/old seed. It sits around half the height and the lobs are almost closed, but hopefully it is still hard 💪 🏼