Likes
Comments
Share
@D1hunned
Follow
Took advantage of their fast grow and top the 5th node and defoliated the first and all baby leaves below it. I've got very good results out of autoflower by doing this throughout my learning experience. Plant #5 wasn't ready for toppin for some reasons.
Likes
13
Share
@Hashy
Follow
******************************************** Growdiaries Grow 22 ******************************************** Welcome to my 22nd grow on growdiaries. I'm going to be stricter on this grow as i have been a bit lax on the last few and let them get out of control. My plan is no more then 12 colas between the 2 plants. I'm going to have a shorter veg period to keep them at a reasonable height. I'm also going to try to keep them away from the sides of the tent more then I normally do. Because I may be going away shortly I'm going to start in the final pot because sods law I'll be away when they need potting up. I'm running 2 photoperiods again, they are both from the MSNL catalogue. Plant #1 Lemon cherry gelato will be on the left looking in the tent and #2 Zoap will be on the right. This diary is focusing on #2 Zoap Nutrients. Ecothrive Neutralise Shogun Katana roots Plagron Terra grow (3-1-2) Plagron Terra Bloom (2-2-4) Plagron green sensation (0-9-10) Plagron power buds (0-0-0) Equipment on Smart plugs. 1. Light= Viparspectra Xs2000 2. Feed= water pump. 3. Extractor= Ac infinity 4. Oscillating fans= 2 on ext. 5. Cameras= 2 on ext. 6. Humidifier= ram 5L 7. Dehumidifier= 2L 8. Radiator= 1KW Tent settings. Light cycle=24/0 Light Power=100W (42%) Photone app has been Calibrated, and I have done a ppfd map over a 40cm×40cm area. Extractor controller settings High temp= 26c Low temp= c Temp step=0c High Rh= 69% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Radiator on= -20c Radiator off= +21c ******************************************** Germination/Prepwork. ******************************************** 📅1/10/24 Tuesday 📋 Prepared 12L fabric pots, filled with biobizz lightmix, then gave 2L water Ec=0.25 PH=7.0/6.7. Then 1L water with katana roots @5ml/L Ec=0.3 PH=6.3/6.3 No runoff. Placed pot into tent with no light on. 📅2/10/24 Wednesday 📋 Dropped the seed into 40ml of water with 5ml/L katana roots and 0.1ml/L neutralise solution at 5.05pm 5.00pm turned light on @ 100w 80cm above the soil, Ppfd=200, 24hr DLI=17.3 10.00pm placed seed into moist paper towel. 📅3/10/24 Thursday 📋 7.30pm tap root breaking through so put the seed into 12L fabric pot, and placed in the tent under constant light. 📅4/10/24 Friday 📋 9.00pm no movement yet. 📅5/10/24 Saturday 📋 🌱9.00pm above ground and cotyledons are open. Day 0 ******************************************** Germination summery. 📋 Nice quick germination. The zoap looks fine. Back soon. Take it easy. ********************************************
Likes
10
Share
I’m so hyped for this skunk to be finished! 🌿🔥 The scent is getting insane and the frost is looking heavy. ❄️💨 I can’t wait to finally harvest this beauty. A message to Zondy: I need to get this off my chest. Zondy, I am deeply sorry. I lied to you, and looking back, I realize I’ve been a terrible person. I acted like a complete jerk, and you didn't deserve that. I truly regret how I handled things and I'm sorry for being such a bad friend. Current Grow Status: The girls in the box are looking solid: • Temperature: Stable at 22.7°C • Humidity: 52.1% (ideal for this stage) • VPD: 1.32 kPa • Light: 100% power A Peace Offering for Zondy 🌿 The air in the tent is heavy and sweet, But my heart is heavy with the lies I repeat. Zondy, my brother, I drifted astray, I acted a fool and threw trust away. I was a shadow, a ghost in the wrong, While these green queens grew sturdy and strong. I’m sorry for failing, for being so low, I’m a terrible man, and I want you to know. But look at these crystals, this skunk in the light, Let it burn through the darkness and make it all right. Let’s spark up the peace, let the smoke clear the air, Until only the truth and the friendship are there.
Likes
3
Share
@II54II
Follow
Now i have only 3 plants i giftet one to a friend of me Plants Look fine
Likes
5
Share
@AustinRon
Follow
TH 1Q2025 - Week 9 - Flower 6 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ OBSERVATIONS A B C D E F G H (Convert to Plant ID) A - Moderate - Double Top B - Tall - Single Top C - Tall - Single Top D - REALLY TALL - Single Top E - Tall - Single Top F - Moderate - Double Top G - Moderate - Single Top H - Midget - Single Top __ Fri May 2, 2025 TH 1Q25 43:F:6:1 Harvest Dehu Amount: [ 4.5, gal] Runoff: [ 0.6, gal], [ 2.9, mS/cm] Res was empty. 2 Gal, there was a LITTLE Sol’n in the bottom of the res BUT Chiller Pump DRY. Chiller pump wouldn’t work for a couple of hours. After it cooled down and was re-submerged, it started cranking. These little Synchro/magnetic pumps are pretty resilient. The Little Giant as Feed Pump is awesome and pumps from the bottom 1/4”. The Synchro needs 2“ of water to submerge, with is 1/2 - 1 Gal, sitting around for ballast. Refresh Reservoir Amount: [ 2, gal] Primer A&B: [ 24.4, ml] EC: [ 1.9, mS/cm] 4 Gallon Refresh Amount: [ 4, gal] Primer A&B: [ 48.8, ml] Silica Skin: [ 24.4, ml] REVEG   Noted Revegging. Attribute it to HIGH EC (We ran up to 2.4 before bringing back down…) Dropped LightCycle to 11/13. - Looking to STAY COOLER ( 80°F) - Let’s reduce SUB-CANOPY Lighting to 50% (Dimmer @ 25%, lights for a 4x4) __ Sat May 3, 2025 TH 1Q25 44:F:6:2 Runoff Amount: [ , gal] EC: [ , mS/cm] We’re in reveg in earnest.      __ Sun May 4, 2025 TH 1Q25 45:F:6:3 Harvested Dehu: [ 3, gal] No Refresh No Pictures Bummed re: Reveg Today - Back to work tomorrow. __ Mon May 5, 2025 TH 1Q25 46:F:6:4 Only one thing to do - is to continue. Checked for Light Leaks. Re-adjusted Top Left Side Vent. Harvest Dehu: [ 1000, mll] Runoff Amount: [ 1, l] EC: [ 2.5, mS/cm] Refresh Reservoir - [x] EC: [ 1.8, mS/cm] - [x] SLF-100: [ 30, ml] - [x] Primer A&B: [ 40, ml] - [x] 3 Gallons (Dehu) Cleaned Manifold Filter: Silica Skin (White/Flake/Film) is clogging 2µ filter Need more stable Drip Rings - have to make my own, again. ;-} __ Tue May 6, 2025 TH 1Q25 47:F:6:5 Harvest Dehu - [ ] Amount: [ , ml] Runoff Amount: [ , ml] EC: [ , mS/cm] IF Runoff is 2 Liters: - Increase fertigation time to 3 minutes - Add Event 9 (9th HF Fertigation) - [ ] Consider reducing light Intensity, Main and Sub-Canopy __ Wed May 7, 2025 TH 1Q25 48:F:6:6 __ Thu May 8, 2025 TH 1Q25 49:F:6:7 - [x] Harvest Dehu: [ 3.5, gal] - [x] Dump & Clean Reservoir (Clean with H2O2). # No Silica ;-( - [x] Refresh Reservoir: - [x] 5 Gallons - [x] EC: 1.8 mS/cm - [x] Primer A & B: [ 67.7, ml] - [x] SLF-100: [ 25, ml] Our silica is creating a silica film in the irrigation manifold’s 2µ Filter. We’ll supplement separately, bi-weekly.
Likes
2
Share
Likes
12
Share
Buenas noches familia, pues empezamos con el final. Nuestras power plant xL se han comportado fenómeno , recordamos que metimos 9 plantas de 3 variedades distintas y esta es la única variedad que perdimos espacio del indoor. Aun así sin palabras en cuanto al resultado. Planta con floración muy rápida, bastante vigorosa, lo malo es que al final tendrás que tutorar si o si, pero es por el peso de la flor. 56/59 días para cortar en floración, (y es Sativa).Se supone que tira 20%thc y su genética es South African sativa.
Likes
7
Share
@brapzky
Follow
I figured nothing could go wrong with 50% amber / 50% milky trichomes. Harvest day, Medical Mass: Huge buds and no traumas but got bud rot because of too high temps. The best I've ever smoked. Harvest day, Pineapplex Express: Got an early trauma when transplanting but handled it beautifully. Potent smoke. Pretty satisfied for a first grow, and I have a lot of changes for my 2nd grow!
Likes
9
Share
Likes
5
Share
Light hitting with around 850 PPFD The stinkyness of this lady is insane! one of the loudest plants ever grown. She takes her time but I am fine with that. Overwatered 1 time this week but she took it like a champ.
Likes
15
Share
2/17/2024 - Vegetation Week 1 Day 1- I removed some of the water to see where the roots were only one had roots in the water. However I want to go ahead and get them on Week one Nutes So I am over 50 gallons of water in the system so I mixed the Trio at a 1.0mil per Gallon but restricted it to a top of 50 gallons period. I top fed the other two to keep encouraging root growth. I also finished my drying and curing from my last run and wanted to show what it looks like all bagged up and in the cannatrol. I added the following Nutes: Silica = .5Mil/Gal= 25Mil CalMag= .75Mil/Gal= 37.5Mil FloraMicro = 1Mil/Gal= 50Mil FloraGro= 1Mil/Gal= 50Mil FLoraBloom= 1Mil/Gal= 50Mil ORCA = .5Mil/Gal= 25Mil EPSOM- 1 big pinch 2/18/2024 - Vegetation Week 1 Day 2- I top fed #1 and #3 since they still don't have roots in the water, I will continue one top feed a day until roots hit water. 2/19/2024 - Vegetation Week 1 Day 3- #3 now has root in the water.. Yay!! I now have #2 and #3 with roots in the water so no top feed for them. I only had to top feed #1 and the only reason I didn't just go ahead and cull her today was I am responsible for breaking her tap root and stunting her, I wasn't careful enough and she was the first to show a good root. In that vain I will carry her a few more day's top feeding but if not root by the end of the week she is getting culled. 2/20/2024 - Vegetation Week 1 Day 4- Today I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water. I also removed the humidity shields from #2 and #3 today the ladies were touching the sides so they are done with the extra shields.. 2/21/2024 - Vegetation Week 1 Day 5- Today Morning: I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, Evening: I decided that the roots of the two are looking great so I am going to drain and bump the Nutes to a full Week 1/ Week 2 Nute base. I added 36 Gallons I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 3Mil/Gal= 108Mil FloraGro= 2Mil/Gal= 72Mil FLoraBloom= 2Mil/Gal= 72Mil ORCA = .5Mil/Gal= 18Mil 2/22/2024 - Vegetation Week 1 Day 6- Today I Ensured the PH was not too high as the system continues to cycle the water and adjust, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, 2/23/2024 - Vegetation Week 1 Day 7- Still have to Top Feed #1 no roots in the water, however she is still progressing nicely slower than her sisters with roots in the water but still going strong.
Likes
9
Share
@VIPgrower
Follow
Week 7 all good definitely not stunted like I thought coc just need patience I guess but all going well so far room running great all good not much else
Likes
5
Share
@SpliffDoc
Follow
Starting this little diary already a week in. This blackberry started flowering at day 16, I dropped the pot and I guess the shock of that started the change. Stick around to see how she turned out.
Likes
13
Share
Desde el inicio mostró un crecimiento vigoroso, con una estructura fuerte y hojas de un verde intenso. Durante la floración, los cogollos se formaron densos, con una capa gruesa de resina y un aroma especial. La cosecha fue abundante y de excelente calidad, con flores compactas y pegajosas. El perfil de terpenos es realmente delicioso, y la potencia no se queda atrás. Sin duda, una variedad que repetiré. ¡FastBuds lo ha vuelto a hacer con esta impresionante genética!
Likes
15
Share
@Papabro2k
Follow
This one was a please watching grow I never did much training and she never got so much attention in the back turned out great ! So much frost thanks 😊
Likes
410
Share
FOR A NICE DISCOUNT ON ALL MARS HYDRO PRODUCTS. PLEASE VISIT: https://www.mars-hydro.com and use my promo code: Rocknroll This mars hydro 8x8 tent was the easiest tent I ever put together and it's huge and still super easy👍 I only had 1 foot on each side and 1 inch from the ceiling to work with and it still was so easy. It weighs alot but that's because it's made of the thickest material 1680D canvas. Tons of vent holes and ports, enough for whatever you need to put in it🤘. I jumped inside and zipped it all up and there was no light leakage👍 the zippers are strong and sturdy and you can tell that as soon as you touch them. If you have any questions about this tent or other mars hydro tents fell free to ask and I'll help you out. My honest opinion is I'll never use another brand tent after seeing this one🤘🤜🤛 Inside the tent I have my TSW2000 and my new FC4800. The tsw2000 is awesome. If you seen any of my grows you can see the results it produced. But this FC4800 is insane. It's fairly heavy and that's because it's built tough💪. It folds in half so it's easy to move around. I have it daisy chained to the tsw2000 and 1 dimmer controls both lights and that's sweet👍. Not much heat off either light and it only raised my temperature 2°C. If you have any questions about these lights, once again feel free to ask me anything and I will glad to help👍🤘 I got some friends at mars hydro so if anyone needs new equipment I CAN DEFINITELY try to hook you up with some sweet deals.. FOR NOW HERE IS A PLACE YOU CAN LOOK AT EVERYTHING THEY HAVE AT REALLY GOOD PRICES... marshydro_aliexpress Good luck to everyone and thanks for tuning in🤘🥁🎸 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hour customer service.. for everything MARS HYDRO please check out https://www.mars-hydro.com and use my PROMO CODE rocknroll for a nice discount 👍🤜🤛
Likes
11
Share
@WIKETFOLE
Follow
The plant grows perfectly,I added lighting 165 watts