I tried to move a couple plants over to the smaller tent to get a little more air circulation in there because I had only a passive air intake. With this many plants in this space I didn't think they're getting quite enough fresh air. But upon moving them over to the tent the light even at the highest position slightly started light bleaching the tops of a few plants. So I then moved them back to this bigger grow space and bought an intake fan. The Zkittlez are fighting me the whole way, I don't know if she likes to be cloned or not. Only the Zkittlez often seem to look a little sad even with everything dialed in for them.

Hi people! Bruce turned out to be a very disobedient girl)) she stubbornly strives for the top! but at the top there is no more space)) for this) after the first supercropping last week, I had to do 1 more supercropping this week .. hope this will stop her and soon she will start growing wide and not high))) she has a lot of buds and veto! I think she will not give a bad harvest!)) and of course seeds))) Please watch the video😏

The seeds are no longer small and have had cuttings taken and now will be put into flower however not all as a few plants have had problems over the last few weeks I’m rectifying

Here we are week 6/7 in this post. Slowly fattening up. I don't think they will swell much more. Sugar leaves are showing signs of amber but actual bud there's still many clear Tris. Breeder says 8 weeks. My grows tend to go over breeder specs of strain lol. I'd like to push it as far as I can ALOT of the plants bid sites are very small was expecting them to get alot bigger.

Harvested a little over 2.5 oz from this plant, very resinous, extremely indica dominant. Smooth smoke. Sorry for the late post I moved and forgot all about the diary until recently and wanted to post the harvest pictures.

Day 8: Nothing New Notes: New lights were supposed to be here today (Monday) according to tracking, but of course, were not. So, we still got blurples for at least the next day. Both plants seem to be growing, slowly but surely! Temp and humidity are relatively under control. Based on the size of the plants, I'm thinking I might transplant into their final homes (5 gal Smart Pots) by the end of the week! Refilling the humidifier twice a day is kind of a pain. Was looking into a possible DIY solution to feed the tank from a large reservoir, so that might be coming in the future. Plants look good, soil looks kinda dry-ish, so I will be watering tomorrow. Day 9: Watering Notes: RIP my dreams of getting a new lights. Shipment is officially delayed with no ETA. Also, watered plants as they looked a little parched, and the soil was super dry. Day 10: Nothing new Notes: Lights have signature confirmation and I wasn't home 😢 Going to pick them up at the PO tomorrow and setting the damn thing up ASAP. I also mounted my exhaust fan to one of the 2x4s framing the room because it felt like CFM was lower than usual which I attribute to putting the exhaust fan all the way on the floor which added a couple bends to the ducting and lengthened it by a few feet. After mounting it (close to the exhaust port in the tent), it seemed to pick up a bit. Plants look ok. Growing very slowly. Soil still looks damp so we're good on watering! GSC definitely looks ready to transplant soon, possibly in the next day or two. NL is close behind it. Day 11: Watering Notes: I was waiting at the post office in the morning for them to open. I got home and hung the light while removing the old one. When I turned them on, HOLY SHIT ARE THEY BRIGHT. Staring at them is almost as bad as staring at the Sun -neither of which I recommend doing-. I set it up right before lights out so I didn't get to test too much. When I got home -after they have been running for 2 hours-, first thing I noticed was the temperature increase. Thermometer said it was 79f. Granted, this is running at full strength (I didn't get to adjust before I left for work). I adjusted it down to roughly 50% as most of this light is being wasted on these poor seedlings anyway. I also pointed the fan at the heat sink. We'll see how the combination of these two things affect the temperature. The GSC looks ready for transplant, with NL close behind it. I could probably transplant the GSC tonight, but I'd rather transplant both at the same time. I might transplant them Friday night after I get home, or Sunday. With that being said, I'm going to hold off on watering them until I put them in their new 5gal Smart Pots. edit: I actually did end up giving them a tiny bit of water. Day 12: Nothing new Notes: Will be transplanting on Sunday (Day 14). Plants are growing pretty steadily now. Both just about have their first full set of leaves! New lights are fucking amazing. I decided to return my filter / fan to upgrade to a better quality setup. I got a Vortex 6in S series for better longevity and also to quiet the grow area. Replaced the filter I got with a 6x16 Phresh carbon filter. Once they're both here, gonna set them up, and return the others. Day 13: Nothing new Notes: GSC is getting so big. Already up to two nodes. Same goes for the NL, but it's more Indica looking in that it's "bushy" and flat. Pretty much a sign of how the two will compare in size later on in their lives. Also, my pH pen sucks, and I needed a TDS pen, so I am going to return the shit one I got and get a BlueLab growers toolkit, which is just a pH pen and a TDS pen. Might seem like I'm going overboard, but I am trying to future-proof my setup for as long as possible. I like to get years if not decades of use out of things I purchase. The higher up-front costs are worth it to me to have a quality product that lasts. Day 14: Transplant Notes: Today is the big move. Bought some shelving / plastic containers at the hardware store for a easy to clean up drainage system. Also bought a big bag of perlite to mix and some random other tools. I mixed both 5gal Smart Pots with a 2:1 Fox Farms Ocean Forest / Perlite mix to help with drainage and aeration. I may have messed up a little and not filled the pot that will be housing the NL, but it's roughly about 3/4 full, and I may have also buried her a little bit deeper than I should have. Other than that, it was a pretty event-free move. Everything is looking good so far. Now that they're in their new homes, the countdown begins, 3 weeks, until I can start feeding them nutrients.

Dia 37 de vegetacion...

It's officially week 4 of veg. What a ride! These ladies DO NOT give up and neither did i. Second grow, it is a learning curve. With all the growth stunned, i am a bit impatient. BUT the good news is the smallest have starting growing again. Anyways... 👽👉19/9 New automation program for this week. (See pictures for app screenshots for automation and datalogger) Temps - 21night/29day RH% - 60RH night / 68RH day My plan is to decrease the humidity at night, to increase the vpd. The same goes for my light output and nutrients. Changing the variables gradually over time. 👽👉20/9 I topped two more plants. The growth is gradually getting better. They should be ready for their first real feed tomorrow. (Only top fed them last watering) 👽👉21/9 ** First real feed. -They reacted well to a last lose dose top feeding, so this time i will give them a full feed, but same low dose. -Programmed new automation based on VPD Graf (see pictures) Set to 1.0 VPD. // Inkbird app, i am adjusting the RH% to the temp in the tent. -Did some experimental LST on one of the smaller ones. Dont have a co2 meter, but have co2 bag. But it has not been added as a variable to the climate calculations. 👽👉22/9 The new automation program has proven efficient and working(for now). Now its interesting to see the plants adapting the constant VPD. 👽👉23/9 Did some more LST work to keep the tallest ladies at level. 👽👉24/9 Visiting the ladies and checking up on the lst work. Tucking in leaves, plotting my next move. *Water day. they shared 5 Liter, where the bigger ones got more. PH 6.4 - EC 1.52 (Last water was PH 6.4 - EC 1.37) 1.5ml/L Bio heaven+Bio fish. (Next time they will get 2ml/L) 👽👉25/9 Turned up the lights from 75% to 100%. Temps are about to rise higher. might as well let the ladies get used to it.

Fed/watered with 1 gallon of the above listed nutrients, every 3 days. (when the growing medium becomes 95% dry) Gave her a light selective de-leafing, to open up the inner bud-sites to more light. The timelapse shows me why I won't be transplanting like this again. (Slow growth/lost time from constricted root mass)

Good

Doing great. Bottoms cleaned, waiting for a day or two to do a major defoliation. 17.11 Vast defoliation. All the bottom leaves and mids. Left around 4 top fan leaves On every branch. 19.11 Plants recovered perfectly, light is back to 100% . Unfortunately my Bluetooth app for mars hydro stopped working. Light cannot pair anymore with the app. Also irrigation is changed to vegetative crop steering.

STICKY BROCCOLI 🥦 / ZAMNESIA & PLAGRON HARVEST WEEK This lady produced some sticky buds and smells amazing!! She covered in trichomes and looks amazing. I don't think the pics will do any justice as to how well the buds look. It's been a great time to grow with everyone else and watch them along this journey. It's always cool to see how others grow the same plant, however get different results!! 😉 STAY GROWING MY FRIENDS 🧡!! THANK YOU 😊 FOR STOPPING BY AND TAKING A LOOK IT'S MUCH!! SPECIAL THANK YOU 😊 TO ZAMNESIA & PLAGRON FOR HOSTING THE GROW CONTEST!! STICKY BROCCOLI 🥦 / ZAMNESIA SEEDS

Frosting up niccceee!!! An she smells amazing already 🦍🍪🔥🤪

La semaine 5 s'est déroulée plutôt bien, même si on a eu un petit excès d'azote. J'ai décidé de stopper complètement l'apport d'azote et de passer à une alimentation exclusivement dédiée à la floraison pour le moment. Mes plantes ont fini leur phase d'étirement et se concentrent désormais sur la formation des fleurs. En douceur, je commence à retirer une à deux feuilles par jour. Un grand merci à louloutre pour son précieux coup de main ! 🌱

She seems to responding well to the net, and defoliating. I have taken quite a few leaves from both this week. Hopefully it won’t stress her out too much, it was much needed. The leaves were shading nodes, and crowding each other. We will see how the week progresses. She has been very petite throughout, but this last week I have notice she is starting to have a growth spurt. I wasn’t convinced it would happen with this one, but she’s on it! She had a rough start, so how ever it goes I’m curious to see how she ends. No deficiencies to note (touch wood) she has been quite resilient in that sense, where as her neighbour s/b has been battling potassium deficiency. Fed the same, but they really are worlds apart. Thank you for taking an interest 💚 Happy growing everyone 💚🌱

This week I moved them into their own grow tent because I realised I couldnt wait for them to naturally flip into flower. It would have taken atleast 4 more weeks. Im really excited for the orange sherbert as the stem smell amazingly orange like. They are under 300watts of LED from mars hydro (samsung evo LM301H EVO). I might add another 250 - 400 watt HPS later in the flower stage as the plants will fill the tent. I will give it another 4 - 7 days before i start tying them down (LST) to make sure I maximize the grow space and allow time for the final stretch. Like this i estimate a yield around 500g to 700g of dry weight once harvested

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.