Day 16 of 12/12

Week 6 was smooth. Especially after correcting the signs of deficiency. The plants have bounced back quickly after being fed and are thriving in the environment. New growth shows no new signs of deficiencies, and old growth did not get any worse. Luckily it was caught early enough and corrected. At the end of week 6 I continued to tie down shoots and continue the LST throughout the canopy. Light defoliation was also done around prime bud spots, and the lower skirt near soil. Technically also removing lower growth that won't amount to much, aka "lollipoping." Plan for week 7 is to continue to water when dry to a PH of 6.2-6.6 and LST with light defoliation where needed. Monitoring the environment and running dehumidifier to 45% RH. Fans are blowing and these seem like they will be big girls. These are some of the bigger autos I have seen personally. *UPDATE* One plant is showing nitrogen toxicity. Leaves are curling bad at top. I took her out and flushed her, as I may have built up too much with run off when fixing the phosphorus issue. Continue to monitor and hope it recovers quickly. But have also seen a lot of other grows with similar leaf traits with downward curls, might be genetics. None the less, will let dry and water thoroughly all plants next time with PH 6.2-6.5 water. *UPDATE 2.0" So the girls soil was not good. Turns out my calibration was off on pH meter and was flushing with around 7 pH water. Read the soils and one plant, that had the claw and dark leaves, was above 7.0 soil pH. Others were below but still a bit high. Have been adjusting pH of water to about 5.8-6.2 pH for next few to help lower it. One girl is not happy. We will get the train back on the rail though.

Satisfecho pero voy por mejorar los parámetros en la siguiente para ver algún cambio, como también cambiar de banco de semillas a uno nacional (Chile) y serán Fem.

Day 27 of flower Grows under TSW 2000 by @polasekplants

Hallo zusammen 🤙 . Sie wächst sehr schön und macht keine Probleme

Mar 26 - 794ppm / 5.97ph +defoliation/pruning (lolipopping) +added homemade Co2 Mar 28 - 763ppm / 6.16ph Mar 30 - 853ppm / 5.98ph +added 150ml Massive to rez Apr 1 - 929ppm / 6.00ph

I finally broke a pound with a single autoflower! Couldn’t have done it without AGLEX cob led’s, Remo Nutrients, and coco coir. They’ve changed my game completely! This grow started off as a pretty standard grow. I did absolutely no training until the veg period was winding down, and pre-flower was beginning. As the SCROG net went in, a little later than planned, numb fingers due to cervical spinal issues, and a poorly time muscle spasm, I snapped the main stalk...disaster right? Apparently not! They’re tough plants! Within a day or so she was perked up and sending up new colas from all the growth nodes now exposed to the 2000w AGLEX cob led’s. These lights have transformed my grow process, and increased my yields by over 300% compared to my old led’s, and only draws 408w from the wall. 1.23g/w is quite satisfactory I didn’t have much tucking to do this grow after the original SCROG. Due to the fact I was a little late getting the SCROG net in place, she didn’t have too much stretch left in her, she certainly fattened up quite nicely though, almost too much so in places. The front left side of the SCROG net got awfully crowded with huge buds packed tightly together. Lesson learned...keep the branches spaced apart slightly further, and maybe allow slightly more vertical growth of the colas to allow slightly better light, and air flow penetration. My issue is I only have 6 foot ceilings in my tents. The ceiling in my grow room is only a little over 6’2”. I managed, through SCROG techniques, without topping or fimming, to keep the top of my canopy 24” from the floor. This allows plenty of space above for the AGLEX cob, and exhaust fan. After last feeding I flushed with just Ph’ed water for 5 days, then gave the plant 48 hours of darkness, to rid itself of chlorophyll before harvesting on November 4th and hanging in a drying rack. It’s still curing in jars but after trying a few samples, it’s an awesome strain, and hits hard. It’s not as hard as it sounds to fill a 4x4 tent with a single autoflower, and still pull 18 ounces (504g) out of that tent. With simple SCROG technique, defoliation, quality grow medium you can achieve the same results. Of course you’ll need an AGLEX 2000w cob, but for an 18 ounce return on a $300CAD light, in 3 months, it’s a no brainer folks! You won’t find a better light under $300 Canadian. You’ll also need a quality nutrient line, and it’s hard to go wrong with the Remo Supercharged Kit. The proof of those 2 products quality are in my harvest. I hope this has helped improve your own grows somehow :) Head over to YouTube and visit my channel, just search for Scrog Freak, or click the link below. Drop a like and subscribe, more videos and logs to come! Recently entered a Gelato OG Grow Off and will be posting updates and instructional videos there. Check it out! Thanks and good growing! ScrogFreak https://www.youtube.com/channel/UCDFY6EjqIMqv2peq1d1eM1Q

Love this strain. One of my all time faves.

Really enjoyed growing this one out. Super frosty, dense, and beautiful structure. In my garden the Blueberry Cookies had the smallest buds, but they were pretty uniform, pretty, and frosty. You open that jar and the terps are there. Would grow again to look for a pheno with a better yield.

Sixth Week / 13.06.24 - 19.06.24 Week 6 continued with smooth growth and development! 🌿 Focused on optimizing light exposure to each bud site using the SCROG technique, ensuring all buds are getting the attention they need. ☀️ The pistils are looking healthy and vibrant, showing promising signs of robust flowering. 🌼 Excitingly, Apollo F1 is already starting to develop its first trichomes, a sign that things are progressing well. ✨ Everything is on track, and the plants are thriving in their environment. 🚀

Solid nugs throughout. Smells great. Looks like a solid haul.

27.12 11 week (43 veg/34 bloom)

This was a really fun week i started prototyping an irrigation system, i might try and 3d print some new nozzles.

Such a top quality strain 🔝 very very terpy, stinks like OG kush, rock hard dense nuggets, they're literally rocks. Very frosty nuggets, full covered in resin flowers. Those orange hairs just make her irresistibly delicious 😋 I just can't wait to smoke such a high grade. This is gonna be a good year. Hope to always have this lady in my garden every year 🤤👨‍🌾💎🍪

✅WEEK NOTES: 20/01 LIGHTS OFF! Some days in the dark and cold box are great to increase flavors and potency ✅ 🌱GERMINATION🌱 01/10/2023 SEED IN THE SOIL 03/10/2023 🔝 10th NOVEMBER 1st FLOWERING DAY🔝 🔝 10° FLOWERING WEEK🔝 📅20/01/2023 LIGHTS OFF 📅 💡💡💡Viparspectra xs2000 at 75% Power + QUANTUM BOARD AT 75% POWER💡💡💡 💉🔍Fertilization schedule:🔍💉 ONLY PLAIN WATER 🧐 🤓 WHITE WIDOW DATA SHEET 🧐 🤓 Strain Type: Feminized THC: 19% CBD: Low Yield Indoor : 450 - 500 gr/m2 Yield Outdoor: 550 - 600 gr/plant Height Indoor: 60 - 100 cm Height Outdoor: 150 - 190 cm Flowering time: 8 - 10 weeks Harvest Month: Early October Genetic Background: White Widow S1 Type: Sativa 50% Indica 50% Effect: Powerful , Stoned Climate: Long Summers Flavor: Earthy, Pepper, Pine 💸💸💸💸💸 Buy WHITE WIDOW FEMINIZED BY RQS: https://www.royalqueenseeds.com/feminized-cannabis-seeds/122-white-widow.html _____________________________________________________________________ 🔧💡OUR SET UP FOR THIS GROW CYCLE💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was incredibly fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com 💣Quantum board - 480w - 4x120w Boards Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊ROYAL QUEEN SEEDS FEEDINGS ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

The two first topped plant show good start of flower but i don't think this will be my best run, i've started tobguve them more nutrients

She's not stretching as fast as the other plants in the room so I had to raise her container in order for the canopy to access to the light. Very compact with tight nodes. Not sure how this is going to end/yield, but we'll see!

These all seem happy enough to say i let them dry out and wilt yesterday.. my fan controller has been acting up too so they were sat at 99% humidity for a day then at 45%.. think I’ve got the humidity settled at 65% now. All photos taken on the last day of veg, tonight will the the first 12hours of darkness for these ladies