Likes
Comments
Share
Good growth this week, the roots have already reached the pots! The Blackberry Cake seems to develop nicely but it's still smaller than the two others. I topped the plants and started to apply some LST and they responded very well. This is the first time I try to do some LST without bending the main stem, let's see how it goes. I increased the light power to 75%. I moved the fan to be further away from the Blackberry Cake because it seems that it suffered from the wind, the leaves look and feel dry. During watering, only a small quantity of water ran down in the saucer and I poured 2l in each pot. The Blackberry Cake and the Cashew Kush looked a bit droopy, I think I should have watered a bit sooner. It starts to smell in the room 😏 Plants heights at the end of the week : ------------------------------------------- Blackberry Cake : 12,5cm Jack Herer : 18cm Cashew Kush : 19,5cm
Likes
7
Share
Vamos familia actualizamos la cosecha de las gelato Olandese de Dutchfem . La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a DutchFem, Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.
Likes
11
Share
Despite starting a week later than the others, Acapulco Gold filled the gap thanks to its natural genetic strength. Clear sativa structure, long-fingered leaves, slightly more spaced internodes, but with excellent reactivity to pruning. VPD: 1.2 EC solution: 1.45 mS/cm Daytime temperature: 28.3°C 💧 Fertigation: Uniform hydration on 40 L of BioBizz All-Mix substrate with pre-switch mycorrhizal treatment (Extreme Mykos + Carboload). Sensizym and Rhino Skin in metabolic support. 🧠 Notes: Some leaves show marginal yellowing, corrected with the calibrated insertion of Cal-Mag. The plant expands very homogeneously, ready to receive active floral stimulators starting from mid-week. 🔧 Objective: control of the stretch, shade management in the lower part with direct ventilation and completion of the last 10% of the SCROG network.
Likes
9
Share
Beginning of week 6 and the start of flowering. Plants are growing rapidly and have recovered from the magnesium deficiency. All new growth is looking healthy and green.
Likes
14
Share
@Dunk_Junk
Follow
12cm growth this week. Flowering stretch slowing down. 💪
Likes
25
Share
Ghost Train Haze — Harvest / Trim / Cure Part 2 — Trimming, Resin & First Cure First of all, once again, sorry for dividing this harvest into three different parts. But honestly… there was just no way to fit this entire experience into one single update without rushing it. This run became something special for us. So instead of throwing everything into one giant report, we wanted to slow things down and give each phase the attention it deserves. Part 1 was about harvest day itself — especially the frozen plant and the preparation for the future ice water hash runs. Now in Part 2, we focus on the monster of the room. The big Ghost Train Haze girl. The giant. And damn… she was beautiful. ⸻ The Giant Finally Ready After drying slowly and patiently, she finally reached that moment every grower waits for: the stem click. Not bending anymore. Not soft anymore. That perfect dry snap telling us she was finally ready for trimming. And honestly, seeing this massive plant hanging there fully dried was already rewarding by itself. Huge flowers. Dense structure. Long spears everywhere. Frost absolutely covering the plant from top to bottom. At this point, we brought out the Trim Bin, got comfortable, and of course… Mr. Baggy joined the session too. Because trimming alone is trimming. But trimming with the homies becomes part of the memory. ⸻ Trimming This Beast Once we started separating the branches and working through the flowers properly, one thing became immediately obvious: This plant was ridiculously frosty. And I mean ridiculously. Possibly the frostiest plant in the entire room. Every touch released resin. Every nug felt sticky. Scissors getting glued together constantly. Gloves turning darker and shinier minute after minute. The flowers themselves came out incredibly dense and compact too. Heavy in the hand. Proper weight to them. Not airy at all despite the sativa influence from Ghost Train Haze. And visually? Beautiful. Silver-covered calyxes. Orange hairs fading perfectly into the resin layer. Chunky flowers with that classic “don’t squeeze too hard or you’ll ruin the trichomes” feeling. This girl truly felt like a reward after the full cycle. ⸻ The Trim Bin Surprise One thing we absolutely loved during this trimming session was watching how much resin naturally collected inside the Trim Bin. By the end of the session, the amount of loose trichome heads sitting underneath the screen was honestly crazy. No dry sift machine. No mechanical shaker. Just trimming. And still… A beautiful golden layer of resin waiting for us underneath. Of course, finger hash also started building up naturally while trimming. Sticky gloves. Sticky fingers. Sticky scissors. The classic signs of a happy trimming session. Then came one of our favorite moments of the day. ⸻ Playing The Drums — Moroccan Style At the end, we decided to have some fun with the trim itself. Using the dry material almost like traditional Moroccan drum-sifting techniques, we gently worked the trim leaves and remaining material to knock off even more trichomes. Simple. Relaxed. Traditional-inspired. And honestly? It worked beautifully. What we collected afterward turned into a gorgeous little hash bar that looked and smelled incredible. We didn’t even bother weighing it. Sometimes not everything needs numbers. Some things are simply for the experience. For the ritual. For the future session. For curiosity. For enjoyment. And this one definitely earned its place for later tasting sessions. ⸻ Final Dry Weight After everything was trimmed, cleaned, and separated, the final dry flower weight from this single plant came to: 294.9 grams dry Honestly? We’re extremely happy with that. Almost 300 grams from a single plant in this run is something we can absolutely appreciate. Especially considering this entire project was: * 12/12 from seed * Minimal training * Minimal intervention * Natural structure * Mostly observation and guidance Just letting the plant express herself while giving her the right environment. And she rewarded us massively. ⸻ Storage & Cure — Different Approaches Once trimming was done, we started organizing the curing process using different storage methods. This time we decided to split the flower between: * Glass jars * Metal Zamnesia containers * Grove Bags Each one has its own purpose and philosophy. Glass Jars The classic. Simple, reliable, proven for decades. Perfect for manual burping and personally controlling the curing environment yourself. They also allow us to visually inspect the flowers easily during cure. ⸻ Metal Containers The Zamnesia metal containers feel more protective physically and also help reduce light exposure completely. They feel solid. Clean. Almost laboratory-like. A very nice option for preserving flower while keeping things discreet and protected. ⸻ Grove Bags These are probably the most modern approach we tested in this run. The idea behind Grove Bags is that their “TerpLoc” technology supposedly regulates humidity internally while allowing gas exchange in a controlled way. The theory is that they naturally maintain flower within the ideal curing range around: 58–62% RH without constant burping. So now we’re extremely curious to compare all three methods later during the smoke review phase: * Does one preserve terpenes better? * Does one keep the flower softer? * Does aroma evolve differently? * Does cure quality actually change? We’ll definitely revisit this in Part 3. ⸻ The Frozen Plant — Flower Comparison After finishing the main giant plant, we also trimmed and cured the material that came from the frozen/hash-focused plant from Part 1. This was important for us because we wanted to compare: * Flower from the “normal dried” plant vs * Flower from the plant intended mainly for extraction And surprisingly? The terpene profiles feel extremely similar. Same family. Same identity. Same Ghost Train Haze soul. Maybe slight differences in intensity or texture, but overall the profile remained very recognizable between both plants. Which honestly gives us a very good feeling about the future hash quality too. The frozen plant itself ended up giving: 58.5 grams dry Plus whatever was already separated and reserved through the frozen material process itself. So overall, absolutely worth it. ⸻ Macro Photography & Focus Stacking During all this, we also continued working on our macro photography experiments. Some of the photos shared in this update were actually focus-stacked images made from: * 112 photos * 96 photos * 33 photos For people unfamiliar with focus stacking: Macro photography has extremely shallow depth of field. When you photograph trichomes closely, only tiny portions stay in focus at once. So instead, we take dozens — sometimes over a hundred — separate images with different focus points and merge them together afterward in software. The result is a final image where the entire flower or trichome field becomes sharp at the same time. It takes time. It takes patience. But honestly, we love the process. Because cannabis truly deserves to be appreciated up close. ⸻ Trimming Timelapses We also recorded trimming timelapses so people can better see the workflow behind everything. Not just the glamorous final nug shots. But the actual process: * separating branches * cleaning flowers * resin building up * trim collecting * the mess * the rhythm * the work itself Because behind every beautiful cured flower, there are hours of patience nobody usually sees. ⸻ What Comes Next — Part 3 The next and final report will focus on: * Full smoke review * Cure evolution * Drying process explained deeper * Flavor profile * Terpene expression * Effects * Overall experience with Ghost Train Haze * Personal reflections after living with this cultivar That final report will close the entire Ghost Train Haze journey properly. ⸻ Thank You And as always… Huge thanks to everybody who stopped by this journey. To the breeders behind these genetics. To the companies making nutrients, LEDs, gear, and tools possible. To the platforms that allow growers to share their passion openly. To the community members constantly supporting each other. To the OG followers. To the new followers. To the silent viewers. To the growers. To the curious people. To the skeptics. To the lovers. To the haters too. If this grow made somebody stop scrolling for even a few seconds and appreciate the plant differently… that already means something to us. From grower to growers. See you all in Part 3. 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
17
Share
I am loving the Genetics from FAST BUDS! The quality is fantastic! But the hardiness of their plant's is great!!! This young girl has copped some abuse! During my training of her, I have gotten quite rough on many occasions, not on purpose! But accidentally breaking branches e.t.c. However I tape her up with some tape & she comes good after a while. I've found that as long as their is still some of the branch intact, she will mend herself & I've had branches that were broken through more than 3 quarters the way! Just wrap some tape around it to hold it together & it ends up coming good. I've also deliberately been rough with HST, squashing branches, pinching to strengthen stems. Damaging & squashing branches to get the shape & direction I'm after. I actually go around & lightly pinch ( squash ) all new branching to thicken & strengthen them! It works very well. So yeah they are very hardy plants & at the end of the day they are a weed!!!
Processing
Likes
15
Share
@HisHope
Follow
9/6 Week 8 And she is doing very well No signs of any problems nuets doing a great job Added another light, custom 90w LED Stretch is slowing 9/8 Buds beginning to form tent is VERY full doing what we can to alleviate some crowding 9/10 Pics Vid Looks like stretch has stopped more or less Stretch may have ended 9/9 Nah its aint ended was just teasing us Increased nuets due to purplish stems seen on the indicas. CocoTek to 10ml/gal A&B Just trying to get things to behave in the tent its really full humidity is very low so thats helping Took longer for things to get into full flower than we wanted, have to work on that. 9/10 Pics Vid Looks like stretch has stopped more or less lights did not need raising
Likes
5
Share
D34, 12 Oct, Sunday ♥️ 2.2 L 💛2.1 L 💚 1.9 L CalMag, GrowBig, BigBloom, TigerBoom Finally started bottom feeding, which makes things easier. Defoliated a bunch and lollipop for better air and exposure. A lot slower in growth than Mephisto genetics. But let's see. D37, 15 Oct, Wednesday ♥️ 2.7L 💛2.5 L 💚 2.2 L All with just Recharge and nothing else. CalMag and/or K def on ♥️ and 💛. Let's see if it can still be fixed.
Processing
Likes
32
Share
Hey everyone 😃. First of all, many thanks to Zamnesia for the support 👏🏼👍. I'll start germinating next week 😋. Until then, I wish you all the best 😊 stay healthy 🙏🏻 and let it grow 🍀
Likes
5
Share
@MeneBud
Follow
Week Nutrients 10/04/2025 - 19H - 30G FLOR DE PEDRA + 200G ADUBO TERRO + 2ML/L LMX + 2ML/L BABOSA 16/04/2025 - 8h - MELAÇO + GORRILA 1ML/L PPFD avg 650 Avg temp 24ºC Avg RH - 60% I traveled for a few days and everything went well in the grow. 🙏
Likes
17
Share
@rockbo47
Follow
SUMMARY: Still on Mid Bloom strength nutes this week (+ 1 tablespoon of molasses per 5L). Irrigating once every 24hrs as always with her taking in about 2.2L average per day and always aiming for 20-30% runoff. Whilst she has many tops, they're very skinny and I'm not sure they are going to fill out to be honest. DAY 58 ------ Friday 19th February 18:30 I found the tent at 28% RH. No idea how that's occurred but I did notice it was hotter then usual this morning. I turned the dehumidifier of for a couple of hours and it jumped back up to 61% and so I will just set it to 55% RH. I fed Jesus 2.2L of early bloom nutes which produced 195ml runoff (9%). Will up this back to 3L tomorrow. I adjusted a couple of ties to expose more bud sites. [24°C/52%] DAY 59 ------ Saturday 20th February 11:30 The tent temp has been sat at around 23°C overnight somehow. The dehumidifier keeping the humidity around 45-50% seems to also keep the temps between 23-27°C. Saturday 20th February 18:30 I fed Jesus 3L of mid bloom nutes which produced 1050ml runoff (34%). Looks like i have a humidity problem and so ive reluctantly removed some more leaves from Jesus as she is bushy again after a week or perhaps I didnt defol enough. If I have the dehumidifier off the humidity is in the low 60s but if I lower it to like 45-50% then the temps stays too high between 24°C-33°C. [22°C/64%] DAY 60 ------ Sunday 21st February 11:30 I made 5L of early bloom nutes at a pH of 5.8 and 5L of mid bloom nutes at a pH of 5.6, both made with tap water. Sunday 21st February 18:30 I fed Jesus 2.5L of mid bloom nutes which produced 825ml runoff (33%). [22°C/49%] DAY 61 ------ Monday 22nd February 11:45 I made 5L of mid bloom nutes with rain water at a pH of 5.9. I am adding half a tablespoon of molasses to every 5L now by adding just enough boiling water to liquify the molasses and then pour it into the feed. Monday 22nd February 18:30 I fed Jesus 2.5L of mid bloom nutes with molasses which produced 710ml runoff (28%). [22°C/55%] DAY 62 ------ Tuesday 23rd February 18:30 I fed Jesus 2.3L of mid bloom nutes which produced 640ml runoff (28%). With the dehumidifier set to 50% RH it seems to keep it at around 50% RH though the temps between 25-30°C. If I turn the dehumidifier off the RH climbs to 60-64%. Removing more leaves will lower the humidity and I do pluck the odd one every day that is blocking light (I rotate the plants daily 25° per day to ensure all sides get a fair share of light). [25°C/50%] DAY 63 ------ Wednesday 24th February 18:30 I fed Jesus 2120ml of mid bloom nutes with molasses which produced 200ml runoff (10%). The temps have risen to 30°C due to the dehumidifier. It is currently set to 50% RH which keeps the temps around 28-30°C and the RH at around 38-40%. I have increased the setting to 65% to see if that helps lower the temp and increase the RH up to 45-50%. [30°C/40%] DAY 64 -------- Thursday 25th February 11:30 I made 10L of mid bloom nutes with rainwater and molasses (level tablespoon per 5L). 5L at a pH of 5.9 and 5L at a pH of 5.8 Thursday 25th February 18:30 I fed Jesus 2.4L of mid bloom nutes which produced 700ml runoff (29%). [22°C/55%]
Likes
20
Share
@DrGanj
Follow
Standard week. starting to swell. No issues really. Wish this girl smelled more. My Bakers delight grow has set the bar high and I think this will be just an average pheno. Probably grow this strain from seed again next run unless she gets her dank on. Defoliating heavy around the tops to keep main canopy below strip level. Aim is for even light on every single bud site, or as much as possible
Likes
12
Share
*Week 4 Flower 09/24* Both Mimosa girls appear to be running fine with Mimosa (1) running a little behind but is catching up accordingly. Small oversight in early growth resulted in a minor stunt but she is improving dramatically. Water Feed has increased by half a gallon ( 1gallon clean - .5 gallon nute feed) *Week 4 Flower 09/28 - Mid week update* Both plants are flowering accordingly - Mimosa (1) is a bit taller then Mimosa (2) Buds are becoming dense and covered in trichomes. No deficiencies - No areas of concern - Potassium and Phosphate feeds continue *Week 5 Flower end of week recap - 09/30* Both Mimosa's are flowering nicely - Budsites covered in frosty trichomes. Mimosa (2) looks shorter but that is because her COLA was tied down to expose bottom budsites.
Likes
3
Share
Spectacular autoflowering kush strain, very kushy smell for real, very citric and earthy, piney too, loving this terps, I have moved her along with all ofmylast automatic plants of this outdoor season inside under my LED panel of HortiONE. They're almost ready to chop down and I think they're gonna finish perfectly under this LED. Let's see how it goes 💜💚✌️
Likes
9
Share
This lady has developed great! I can see long internodes on her as normal, and she has stretched a little bit looking for that light indoors, but now she has been completely moved outside as she is now a strong plant almost adult ready to give her best! Welcome 2021 outdoor season!!
Likes
2
Share
@CheeRz
Follow
The nice weather has finally returned, and it should stick around for the next few weeks. It's just in time for the last couple weeks of the ladies. ☀️☀️☀️
Likes
2
Share
Hallo liebe Growfreunde 🤗 Zum Abschluss der Woche wurde heute umgetopft in die Endtöpfe 😎. Hierbei handelt es sich um 15 Liter Autopot 1 Pot system mit 6 Töpfen. Für die , die es nicht kennen, es handelt sich um ein automatisches Bewässerungssystem, dass nur mit Schwerkraft arbeitet. Benutze es zum ersten Mal, deshalb kann ich nicht viel dazu sagen. War easy zum installieren, mal schauen ob es hält was es verspricht. In den Wassertank kommt nur PH korrigierten Wasser und CalMag. Gedüngt wird nur mit Greenhouse Powder dass ich unter die Erde gemischt habe. So in 2 Wochen etwa, werde ich sie in blüte schicken. Kein topping, ich denke mit 2 Sanlight habe ich genug Tiefenwirkung und Platz nach oben hab ich auch😁. So, jetzt hoffe ich dass sich meine Ladies schnell erholen und schön weiter wachsen☺️☺️☺️ euch allen einen schönen Sonntag und morgen einen grandiosen Wochenstart💞
Likes
28
Share
Hat alles reibungslos funktioniert. Kann das Setup mit Biotabs und Autopots nur jedem empfehlen der nicht jeden zweiten Tag gießen möchte. Freue mich in ein paar Monaten hier den nächsten Grow zu starten.