Hermaphrodite

Día 21

Hello fellow growers and user of the lovely lady Mary Jane. It was last week harvest time. I was busy with an experiment with the light schedule. I went from 18 hours of light to 12 hours by turning the clock back and make the light time shorter. And after a week on 12/12 I put them in the dark for two day’s. the though behind this is that the ladies will react by making more trichonomen and compacter bud’s . after I harvest the cola’s I cut them and lay them to dry. After 9 day’s they were ready. I weight the bud’s and harvest 167 grams. That’s about a halve gram per watt. I thought that it would be more, and because I didn’t have a control plant it’s a guess if the experiment works or not. I do not think it harms the ladies but there also no great yield. The next time I do have auto flowers I’ll try to doe it again but then with a controlled lady in a different tent. I like the White Widow Autoflower. It’s an easy plant and can handle some stress. I growth them under the Budmaster II UK HPS 9 and it’s a very good lamp for growing and flowering. As nutrition I used Mills Nutrition’s and I have to say it’s easy to use and to prepare. I use lemon juise to get the PH level down but do not use it when you have a feeding system it cloud clog up your system. I wish everybody a nice week and my new adventure will be the CBD Spliff Berry and I already started that diary. Smoke on!! Barney Green.00

Update; February 14th, 2023. From the moment I flipped to flower, they’ve been exploding with growth! They are super healthy! They grow back and fill in so fast after defoliating, no matter how heavy I go. I’ve added the supplemental lighting (Viparspectra 600) this week to really get the most I can. Figuring out a way to mount it higher.

Na

Ich habe sie getoppt,hat kein stillstand gemacht und die seitentriebe schießen!! Sie hat sich in der letzten woche an volumen verdoppelt....

Fun time im excited it's turning out pretty good allot allot of learning as you go but it's working I think... the GSC started dropping a couple leaves but I think it v was just cause it got to dry flowering stage seems to suck up allot more water....

🍃🌱🐛🌞🤭

Vamos familia, actualizamos la cuarta semana de floración de estas NoName de Seedstockers. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. En cuanto a las plantas las veo verde sano, estiraron bien y ensancharon bastante también. Las flores empezaron a formarse, por el momento todo correcto, os dejé también alguna novedad y un cambio en la sala, agradecer al equipo de seedstockers por hacerme llegar las novedades y a Mars hydro por el nuevo TSW2000. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

Ultima semana consumiendo sus reservas....esperare a secar bien el sustrato después de el lavado de raíces y se vendra la cocecha!

So after a very slow , deformed and sluggish start , as you can see this girl has now come into her own and very healthy and produceing really well , I seems as soon as I removed all the very first droopy leaves coving up all the branches she shot out in all directions , So I am pleased with her progress now and she looks too be a good yelding plant even at this stage ,

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3.

Waiting on a full plant hang dry so will wait at least two weeks maybe three hope ma vegging station holds up n can dae tge damage the now as av said guys this is definitely not the perfect set up am not on good terms with land lord so basically squatting here lol and growing and a got caught with one in this house the land lord doesn’t even know lol 😂

Hey everyone A fantastic week here. No rain, temperatures around 27°/32° Celsius and nights are not colder than 16° with low humidity. Sounds perfect huh 😃 This week the buds really started bulking up. A good smell too and not to stinky so far. I'm glad with that to be honest 😂 no need to attract the neighbors. Gonna make some daylight pictures too tomorrow. Just got home from late shift. Sun just went down while doing this update 🙂 I gave a good feeding this week. All nutrients were 4ml on 4 to 5L of water (6,4Ph) No signs of nutrient burn and i guess the PH in the soil is right. One leaf is showing brown marks and is dying but that's the only leaf for 3 weeks now. Guess she doesn't receive enough light or the plant used it as food when there wasn't enough water left. LST is good but i really see mistakes in the lower canopy. Some buds don't receive enough light. I cut away a few leaves but i don't wanna do too much. Trial and error year for sure. Will learn and know a lot for the next grow 😃 This girl has 3 to 4 weeks left i think. Next week will probably be the last feeding. Will wait to see how she develops. Gonna water in one more time with Neem Oil too. So far so good. My easiest grow ever 🙂 (I jinxed it now 🤦‍♂️) Happy growing everyone 🙏

Officially week 7 Dec 31: Came back a week later to very heavy pots, needed 36 hour drying period, not happy, smaller plant has tips of leaves curling down, some like taco, dryed out the pots and went back to normal conservative feeding, need to fine tune the auto irrigation setup before I use it again for sure. All in all, nothing crazy happened. Really cool to see a plant be small, but way bigger after a week of vacation. First grow seems to be going pretty good! PS: I think my hygrometer is broken, saying 85-100% RA even when I significantly improve airflow and it doesn't seem anywhere near that. Gonna do the salt paste test on the hygrometer . Jan 1: I recalibrated my hygrometer and it’s working great, weird leaf curling of smaller plant still happening but seems to be improving, big plant is frosty and fat for week 7, seems to be at same stage in development as smaller plant but the pheno is beautiful.

So after this week the out break hit. I grow for self medicine as a Crohn’s Disease sufferer and am heavily immunocomprimised. I had to relocate to a rural location to truly self isolate and the plants definitely stressed.

Allora....quinta settimana di vegetativa alcune piante mostrano dei segni di carenza date dal fatto che non c'erano i nutrimenti corretti, adesso che finalmente ho tutti i nutrimenti Giusti in teoria questi problemi dovrebbero scomparire, nelle prossime settimane vedremo come si evolverà la situazione, questa settimana le travaserò nel vaso finale poi farò ancora un paio di settimane di vegetativa e quando saranno pronte le metterò in fioritura.