From my first grow using a LED 300w light I bought of eBay I have moved on to a indoor tent for my second grow with a 600w HPS set up as I found that the LED light possibly due to its low build quiality was not producing enough light for the buds to reach there maximum potential. After a week from planting the seed I moved them from under the LED into the tent to let them do they’re thing.

Cut down wet weight 721 g :)))))) Bottom half to do in a week or two:)))) will up date all in harvested week first weigh in 165 g :))))

So starting the shogun dragon force for 2 weeks now as I got recommended this instead of the final part ripener, so I hope there's a nice difference, the plants are smelling amazing now. I will keep you all updated and add more pics soon.

Week 12 and the plant is still going strong. It’s fading fast and plumping up. Trichroms are about 80% cloudy and 20% clear. Almost no amber. At this point I’m only giving the plant PH water. Plant still looks like it has some weight to still put on.

Le 48ème jour se déroule avec grâce, malgré un léger obstacle : une carence en calcium touchant l'une de nos chères plantes. Heureusement, avec une dose ajustée de calcium, j'espère avoir rectifié ce déséquilibre, veillant à ce que notre verdoyante compagne retrouve son équilibre nutritionnel. Cette plante, bien que modeste en taille, se distingue par sa structure compacte et robuste. Ses fleurs commencent à se parer d'une riche couche de trichomes, scintillant de promesses et de potentiel. Je poursuivrai l'apport méticuleux de nutriments, dansant délicatement sur la ligne fine entre suffisance et excès. L'objectif reste clair : nourrir sans surcharger, pour éviter tout risque de brûlure par excès de nutriments. Au regard de l'état actuel de notre protégée, je prévois qu'elle atteint son apogée dans les 9 à 10 semaines. Remarque : carence en calcium a la 5/6e semaines rectifié avec l'ajout de CallMag La plante présente un grand nombre de trychomes et des feuilles violacée sur le dessous. Engrais : moitié de la dose recommandée en NPK pour corriger les carences, a vérifier si brûlures.

At the end of last week, finally flower indicators started to show and these week it went more. Day 32: I sprayed them with Rhizotonic this week. This will be the last week for sprays. I don't like to spray my plants while having buds on it even thought it is organic. Always make sure you spray from below the leafs. They will uptake it better and also spray some above. With the lights off. Did some defoliation again and removed some lower internodes which will be crappy buds anyways. Made a video of my feeding bucket as well, in case some of you wonder how I feed all those plants manually. It is a pump with an gardenhose attached. Thats it for this week, Until next week!

Alimentação: dia 7 e 11 Janeiro. Acho que esta vai ser a última a sair da tenda.

They stretched so much i almost ran outta room for my light lol. They loving their feed and doing really well so far i think.

Día 51 (22/07) Las plantas han reaccionado bien al 2º topping! 💥 Algunas de ellas ya empiezan a formar los nuevos brotes justo debajo del nudo cortado! Hoy NO necesitan riego, tras regar ayer con 1 Litro de Té Vegetativo de Lurpe! 💨😁 Día 52 (23/07) Las plantas empiezan a formar rápidamente nuevas ramas tras el topping! 😍 A pesar del alto calor (35 - 38 ºC), gracias al sombreado y el mulch se mantienen frescas y con la tierra húmeda, ¡perfecto para los microorganismos del living soil! Día 53 (24/07) No es necesario regar Día 54 (25/07) Los nuevas ramas se lanzan al cielo! 💥 Me encanta ver como los nuevos brotes de un color verde pálido (casi radiactivo) nacen entre el intenso verde oscuro de las hojas de abanico ya formadas Hace un día nublado y con 29 ºC de máxima. No es necesario regar! Día 55 (26/07) Riego con 500 ml H2O pH 6,5 Día 56 (27/07) Retiro los ajustes de LST a la mayoría de las plantas, para que crezcan libres ahora que se acerca el stretch No es necesario regar Día 57 (28/07) Riego con 1 Litro H2O pH 6,5 con 25 ml/L de Humus de Lombriz Liquido Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

HUGE shoutout to Paul at New420GuySeeds for sending me these new 3 Run Homer test seeds to try out! I am extremely excited to see how this grow goes & to make it even more interesting there are currently no diary’s with this strain on GD! Everyone go check out their website & get some for yourself! I will be back tomorrow with day 1 pics when I get them planted! Keep watching & happy growing friends!✌️🏼🤙🏼🌱 Day 1 - Everything is going great all 3 seeds popped!👍🏼 Finally got them planted & watered with Fox Farm Big Bloom (6tsp per gallon) Day 2 - I can see all 3 seeds starting to come up we are off to a great start👍🏼✌️🏼 Gave them a little more water this morning with big bloom, grow babies grow! Day 3 - Everything is going great!🙏🏼 Day 4 - All 3 are growing strong👍🏼 Day 5 - PH water 6.4 Day 6 - end of week 1, everything is looking good✌️🏼🌱

Four weeks into flower. About half done. She’s starting to smell sweet, and I can pick out the smell among her sisters. The stretch is over and she’s recovered fully from defoliation. Now we wait.

26.08.26 Willkommen zum ersten Tag der 7 Blüte Woche Apple Betty musste not geschlachtet werden der Rest ist jetzt in der Phase wo die Buds anschwellen hoffe das wars mit dem Schimmel und endlich bekommt Black Lemon genug Licht 27.08.26 Langsam ist richtig fürs Auge obwohl wenn das so weiter geht alle hauen die Stempel raus die Diesel ist erst gespalten hads mit Pflaster wieder verbunden nach 1h der ganze Ast wo der gespaltene Ast sitzt fast komplett raus gerissen also auch geklebt und mit Pflaster die Äste zusammen ein bisschen das ein Ast den 2 stützt

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Hard buds with a lot of resin, very intense smell, sweet, fruity, as promised the plant produces a lot of resin, a lot, even in some fan leaves, I will dry them and put the result soon.

yield over 800gs dry . germany grown