Likes
Comments
Share
Started from clones, were pulled from clone machine last week. I then transplanted into rock wool cubes, let them root for 3 days. Once roots emerged they were moved to RDWC buckets. Also trying out a melon gum in a single site as possible next crop
Likes
34
Share
@Roberts
Follow
FBT 2308 is doing great so far. He roots have hit the solution. She is growing in Agrogardens nutrition under a Medic Grow mini sun 2. Everything is looking great at the moment. Thank you Agrogardens, Medic Grow, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
2
Share
@Xabii
Follow
28 days huh... I don't know what to think here right now. The plant looks completely healthy, no over or underwatering symptoms, no nutrient deficiency or excess symptoms, completely healthy in my opinion. The plant is growing as seen in timelapse, would not say it is stunted. It is growing a shit ton of side nodes but nothing is stretching and I don't know why. I did see some stretching at the end of the week, either the plant will stretch drastically over the next week or I will end up with a Basketball-sized XXXL Bud. To be sure I re-calibrated all probes and they were fine before calibrating so no error on that side. Mixed a new batch of nutrient solutions and did a full swap of the reservoir. Added support bars and a net. Values are average of the day. DATE - EC(us/cm) 20250614 1508 20250615 1555 20250616 1621 20250617 1595 20250618 1540 20250619 1516 20250620 1531 DATE - PH 20250614 5.91 20250615 5.93 20250616 5.96 20250617 6.00 20250618 6.10 20250619 6.10 20250620 5.72 DATE - ORP (mV) 20250614 65 20250615 50 20250616 40 20250617 51 20250618 63 20250619 80 20250620 43 DATE - °C - RH% (Tent Temp/RH) 20250614 26.9 54 20250615 25.5 49 20250616 24.1 51 20250617 25.3 51 20250618 25.8 52 20250619 26.1 49 20250620 23.8 45 DATE - °C (Reservoir) 20250614 24.1 20250615 23.1 20250616 21.6 20250617 22.4 20250618 23.1 20250619 22.9 20250620 21.1 DATE - CF 20250614 15.08 20250615 15.55 20250616 16.21 20250617 15.95 20250618 15.40 20250619 15.16 20250620 15.31
Likes
5
Share
Day 11: We have: 3x White Widow 1x Critical 2x Special Queen #1 1x Special Kush #1 Important: The method used "jiffy" is efficient and fast but in another possible germination I will definitely do the "paper towel" method first. It is important to note that for good germination, the seeds must have as little soil as possible on top, where I delayed by 1 week due to the fact that the seed was very deep in a jiffy. I reduced the distance of the LED from 60cm to 30cm because we still have plants that are stretching too much so this was the measure adopted awaiting results. For 8 pots of 0.5L, 500ml of pure water containing: 1ml Voodoo Juice 1ml Sensi Grow A+B (2ml total) 1ml B52 2ml CalMag The net proportion was satisfactory.
Likes
5
Share
[ Introduction ] Welcome to my first ever grow journal! I have been growing medically for the past couple years, documenting some of my grows on my Facebook and Instagram (@OnlyTomatoes) pages, as well as several cannabis cultivation subreddits. I've found that I do a lot of things differently than other growers, so I'd like to share a full cycle publicly in case I have the answers to somebody's questions. [ Updates ] Day 4 - Lights have been lowered to 18 inches off canopy, dimmed to 25%. They've recovered from both their transplant and their topping, new growth looks almost perfect. I'm going to keep the accidental sunflowers for a few more days and see if there's any significant difference between plants. They all received a foliar spray of neem, kelp, and a bit of calmag before lights off yesterday. I expect to be able to remove the remaining damaged leaves by the end of this week. Day 7 - Lights increased to 30%, C02 increased to 800ppm, getting ready for week 2 of veg. Fed today, fairly low EC (<1.5) blend of Silica, Calcium, Kelp, Molasses, and Tribus Grow in a mixture of R/O and tap water. Very little runoff at 1gal per pot. Will most likely foliar again before lights off with a light fish hydrolysate mixture to help with any nitrogen issues. Any dead or dying leaves you see are from pre-transplant, I'm just waiting a few days longer for the existing rootballs' ph levels to swing back to a healthy range before removing all that unsightly growth. I'm really not sure when I'm going to remove the sunflowers growing in some of the pots, I've seen no negative effects yet. I could flip group 1 into flower if I wanted, the canopy is level and beautiful, however group 2 will take a while longer to fill a canopy. [ Grow Details ] Plant Count: 64 (Clones) Mother Age: 17 Months Strain: Gelat.OG (Phenotype 5) Breeder: Seedsman Hunter: OnlyTomatoes Veg Time: 3-5 Weeks Flower Time: 65 Days Training: Multiple Toppings Final Pot Size: 5 gal (Fabric) [ Room Details ] Room Size: 21'x9'x11' (190sqft, 2100cuft) Canopy Size: 10'x9' and 5'x9' (135sqft) Lighting: Grower's Choice ROI-E720 x6 (dimmed to 25% power during veg) Cooling: Cooper&Hunter 36k BTU Minisplit Dehumidification: Quest 225 Equipment Controllers: TrolMaster (Lighting, Cooling, and Dehumidification controls), AutoPilot (C02 Controls) Watering System: Manually controlled drip irrigation, x2 1gph drip emitters per pot [ Pre-Veg ] These poor clones have lived an abused life during 2021, sitting around in solo cups for over 2 months waiting for a new home. Normally I would never allow pre-veg plants to have such obvious deficiencies, but constant hand watering led to some poor nutrient decisions on my part. They've been in their final pots for a few days now and were topped on day 0 of veg. I plan on lowering the lights to 18"-24" within canopy around day 3, I'm just allowing some extra time for the roots to really dig in. I've found that a batch of dirt that was used had sunflower seeds in it, possibly winter food storage from an outside rodent, so I'm debating how long I will let these sunflower seedlings grow alongside my plants. They do make a good cover crop with amazing root systems, I just don't think that really applies in pots of this size where plants can choke each other out.
Processing
Likes
5
Share
Just at the end of week # 2 in bloom , LST training is going well and the canopy is pretty full , cooler outside temps allow me to use my co2 burner and they are all looking great with lots of bud sites and liking the nutrient balance, made new nuits today and it went from 1400 to 1150 in two feedings , one more week of stretch and then I will finish the under canopy cleanup and plan on a light defoliation at week 4 of bloom. The 8 Ball Kush is really showing great growth and it’s early on , should be some huge buds this crop , the Blue OG Kush is healthy , it’s my first time with it so I’m not sure what it grows like . Stay Tuned
Likes
15
Share
@NUHS_9585
Follow
Add auto ultimate from Dutch passion. One seedling plant is 2 weeks old. Trying to keep humidity higher. SEED: #1 30cm #2 40cm #3 40cm #4 40cm #5 30cm #6 15cm CLONE #1-1 #2-1
Likes
21
Share
@Swiftgrow
Follow
Bud development coming along well, all plants are now fully in flowering 🎯 Don’t know if I should be worrying about the yellow leaf tips on my west coast OG 🤠 it’s growing really well though
Likes
3
Share
📆 Semana 5 El cultivo entra de lleno en fase de engorde, con las flores ganando volumen y densidad día a día. El stacking se intensifica y los cogollos empiezan a compactarse, formando colas más definidas y pesadas. La planta mantiene una estructura sólida, con ramas que soportan bien el peso y una canopia estable que sigue aprovechando al máximo la luz. La producción de resina aumenta claramente, cubriendo ya gran parte de las flores y extendiéndose hacia las hojas cercanas. El perfil aromático se vuelve más complejo e intenso, empezando a mostrar matices propios de cada genética, señal clara de que la maduración avanza en buena dirección. Seguimos creciendo fuerte 💪!
Likes
32
Share
Just a fun wee grow in a bong. Using a white widow auto seed from royal queen seeds. seed germinated 100% 😁
Likes
4
Share
Welcome to week eleven for Frances, an Auto Fractal by Divine Seeds. Day 71 - photographed - Frances is is looking frosty. I really hope this girl finishes without any bud rot. Day 74 - photographed - I am inspecting all of these girls closely day by day. This girl is not a million miles away, going to start feeding finishing nutes. Day 76 - photographed Thanks to Shogun for providing the nutrition for this grow, and to Divine Seeds for providing the seeds. If you are not already a part of the cannabis community on X (formerly Twitter), I recommend joining! I have the same username over there.
Likes
6
Share
Despite her flaws due to my own fault she was giving me a real cheese smell but now the wedding cake comes through and sweetens it up. She smells amazing
Likes
17
Share
Frostbangers are doing really well as the buds are thickening up she smells so good.They are starting to produce some heavy trichomes.I have begun to add 2ml Plagron green sensation every feeding now.The light intensity is set at 70 percent on the Se7000 which they are taking well.
Processing
Likes
4
Share
Sorry for the delayed post I honestly forgot I started this one lol...they’re doing great I had some of those biodegradable starter pots that I used n prolly let them stay in too long tbh but now they’re both in their new homes! One is all coco and the other is top-half coco/bottom-half soil..thanks for reading/looking
Likes
100
Share
Giorno 49 Ho girato in fioritura. Le due Zombie come già detto nelle settimane scorse sono due fenotipi completamente diversi. Uno sicuramente haze e l'altro bubba Kush. Stanno bene entrambe ma la più grande l'ho dovuta defogliare per bene e sono certo che tra 15/20gg farò una seconda passata. Ultima bevuta prima di mandare in fioritura EC 1.28 ph 5,8. Anche le due Rainbow Belts sono diverse perché sfregando il gambo una sa di Zkittlez l'altra di frutta quindi penso più a qualche fenotipo dosidos. La Milk Monkey è quella che per struttura mi piace più di tutte. Per la prima volta ho preso dei cloni anche se non so dove tenerli e sotto che luce. Per ora li ho messi in un vaso ricoperto da velina nel box delle autofiorenti
Likes
2
Share
@bbs42
Follow
Soil issue. Still not sure what caused it
Likes
37
Share
@Aedaone
Follow
The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of water to be fed. Day 1 we have high temperature of 91°F with mostly sunny skies. I watered 2-3 gallons from the hose. Day 2 we had a high temperature of 90°F with clear, sunny skies. I watered 2-3 gallons from the hose. Day 3 we had a high temperature of 97°F with mostly sunny skies. It was a scorcher. I watered 2-3 gallons twice today from the hose. Day 4 we had high temperature of 95°, but it felt like 102°. Skies were partly cloudy. I watered 2-3 gallons twice today. Day 5 we had rain the previous night and early morning. We had cloudy skies, with high temperature of 81°F. I did not water today. I added 50ml blood meal to each pot spread evenly on top of the soil. Day 6 we had a high temperature of 87°F and mostly sunny skies. I watered 2-3 gallons. Day 7 we had partly cloudy skies and a high temperature of 86°F. I watered 2-3 gallons each pot This week was a success. These girls really began to fill out. We've got another month ish til flower begins so I expect these to be monsters.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
50
Share
Hello growers and tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 There has been much change this week!! First there was a big defoliation done, I cleaned the bottom of the plants. All the growth that wouldn't amount to anything because the light doesn't penetrate that low. Also took off the biggest fan leaves to give more room for light. Then finally switched to 12/12.. After just 36 hours after the defoliation there was a major change. New growth everywhere, colas started stretching upwards fast. By far the tallest girls in the tent. Her colas are stacking up nice and tight if she keeps that up we'll have some nice dense colas. 😁 Great reaction to the defoliation and 12/12 switch. I'm still watering every other day, After the defoliation I watered with only Enzymes 2ml/L to clean the roots a bit then started with the nutrientes again. I dropped the amount of grow nutrients from 3ml/L to 1ml/L and started adding bloom nutrientes 2ml/L for now. I'll slowly be upping the bloom nutrientes and after week 2 I'll no longer add grow nutrients. That's it for this week. Stay tuned to see how they flower. Stay safe!
Likes
15
Share
what can i say, the smell of this girl is taking over the whole tent. she’s gorgeous and from the looks of it will be the fastest finisher in the tent. truly excited to try this one