Likes
Comments
Share
@Roberts
Follow
It is the start of vegging for Purple Ryder auto. So far everything is looking good. She is in the Agrogardens nutrition, under the Medic Grow mini Sun-2. ๐Ÿคž๐Ÿป for a great grow. Thank you Medic Grow, and Doctor's Choice. ๐Ÿคœ๐Ÿป๐Ÿค›๐Ÿป๐ŸŒฑ๐ŸŒฑ๐ŸŒฑ Thank you grow diaries community for the ๐Ÿ‘‡likes๐Ÿ‘‡, follows, comments, and subscriptions on my YouTube channel๐Ÿ‘‡. โ„๏ธ๐ŸŒฑ๐Ÿป Happy Growing ๐ŸŒฑ๐ŸŒฑ๐ŸŒฑ https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
8
Share
This should be up to week 2-3 of flower, where the Mimosa x Orange Punch, which had the earlier Mutation, started herming on the mutated part, which i noticed a bit too late and it pollinated some of the other buds, i cut all of the affected bud sites of, in the end the furthest away runtz got pollinated but the others luckily barley did and only had like 5-10 seeds in total.
Likes
19
Share
day 35. feb 19- been slow to update, scrog was plonked on top of plant as it showed signs of height becoming a ptoblem given the other 3 plants. seems to have stalled a bit this week after application of screen but after 4 days she seems to be back in business allbeit slow in comparison to my bubblegum which was started at the same time(see other post). nutrient wise im trying to follow the bio canna schedule which is designed more for soil than my special mix which i added a BIT of soil to, as such it likes to drink a litre seemingly every 4 days. contin7ing to interchange nutes with fresh water but also not wanting to flush too much of the goidness out. 1l of nutes then ill follow with 300 and 300 ml of fresh ph'd water. also given the fact the organic nutes ph themselves in my mixing jug, im wondering what happens when i pour acid ph-downed water to my pot.. wonder whether it better to just give pure distilled at ph 7 than take water from 7.8 to 6.2 using acid to then feed the plants. *shrug*.
Likes
13
Share
@RFarm21
Follow
Semana 15 abril - 21 abril 16 abril feeding day (1.5l) 20 abril feeding day
Likes
13
Share
Both Slushberry Mintz plants are doing exceptionally well. This strain has been performing flawlessly both outdoors and indoors so far, with no issues at all. This week, the indoor plant was defoliated, lollipopped, and topped in preparation for flowering, as I plan to switch it to the flowering stage soon.
Likes
16
Share
@Mospeada
Follow
Final week, things got really easy for a few days. The plants are eating less and less each time I check the ppm at the end of the day. It will be RO water only when topping up the res for the rest of the grow. Made an effort to lower humidity as much as possible seeing as I can't do cold stress. Triches are pretty much all cloudy and just waiting on some amber to show. Only seven plants made it in the end as a revegged plant was out competed and basically it might give an ounce. 1.235 2.440 1.920 1.385 .940 1.075 Combined wet weight: 8.99 kg or 19.8 pounds
Likes
24
Share
Strawberry Truffle - White Truffle x Red Pop & limited seed it came with Chem 91 x Red pop
Likes
459
Share
@Ju_Bps
Follow
Hello my friends ๐Ÿ‘จโ€๐ŸŒพ๐Ÿ‘ฉโ€๐ŸŒพ, This 3rd flowering week was good, girls are sweets and healthy, Buds continue to be along ๐Ÿฆ”, leaves turn a bit purple. I've put the #3 on the ground, she's became big in few weeks, and now, almost same size than others. I'm very happy about the canope ๐ŸŒฒ๐ŸŒฒ, I've just removed some under leaves and micro buds in the shadow. And daily fighting with leaves to kick off them under. ๐Ÿ’ฆ 2 Watering this week 1.5l/plant . Water + Terra Flores + Canna Boost Water + Cannazym + Sugar Royal PH@6 I continue to spray with water each 2 days. Lamp @100% Thanks community for follow, likes, comments, always a pleasure ๐Ÿ‘ฉโ€๐ŸŒพ๐Ÿ‘จโ€๐ŸŒพโค๏ธ๐ŸŒฒ See you next week ๐Ÿ‘Š๐Ÿ‘Š Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Vannila T https://www.thehighchameleon.com/shop/vanilla-t-5
Processing
Likes
13
Share
Ok guys had a bad week this week plants have been really affected went away took my eye of ball for 5 days plants ph has fucked up and caused alot of damage to leaves etc checked ph run off @6.4 so going to flush with 5.8 to hopefully get these babies back to normal also maybe a ec problem think may have been feeding too much I am a newby learning has a go so any advice help etc feel free to comment
Likes
7
Share
Gorilla Glue #1 - Harvest Comment - I Am Very Satisfied With What I Got, I got 3 ounce 7 grams - I Uses Advance Nutrients PH perfect In veg then I switch to the iguana juice organic juice for the flowering stage. I notice a much more slower growth when I switch to organic nutrients.00
Likes
37
Share
@Ferenc
Follow
Last couple of days... No watering from today, (Day 129) and the light will be switched off as well from tomorrow (Day 130) so I will harvest them approx on Day 132 or 133 on the 18th week :)
Likes
31
Share
@Cultivate
Follow
Week 8 Looking absolutely huge๐Ÿ˜‚ Theyโ€™re so tall and wide . Lots of healthy green leaves and strong roots. I was worrying a lot about sex issues as when I did my research I found out theyโ€™re quite common to hermaphrodite. Was really worrying but all calyxโ€™s have female signs (so far๐Ÿ™๐Ÿป) so pray for me brothers&sisters.
Likes
26
Share
@Drgreen13
Follow
Hi growers, so we're now in week 7 and the red poison is definitely winning in terms of speed, she looks and smell gorgeous, i reckon 2 more weeks. The purple lemonade is taken longer than usual but alls good, she is starting to turn pink/light purple which im excited to see. And for the bcn critical, she's small but it looks like she'll have some bih nuggs. Overall, im happy with the progress, if anyone has any pointers or notices that I'm doing it wrong, please tell me. Thanks guys and happy smoking, #420everyday
Likes
2
Share
Likes
6
Share
Hello guys.I m in 4th week with this beauty and she looks fine.I was expecting to get more height this week and I think that she flowers too early.I hope I m wrong ๐Ÿ˜Ÿ
Likes
7
Share
I reported this plant after it snapped the leaves started to die extremely fast so I figured she couldn't breathe. Dying has slowed down however. Just gave her a gallon and a half of fresh water no nutrients
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
8
Share
2025-09-18 A lot happened since the last Update Yesterday i started the Autopot-System, and from now on just appreciating them no more work because of the " only- add-water-Strategy By Biotabs. i was cutting some lower leaves and shoots- and she got some supercropping. to spread her more and topping aswell ๐Ÿ”„ Transplanting Process ๐ŸบContainer Setup Container: 35L Smart Pots Growing Method: Autopot System with "Water-Only" strategy ๐ŸŒฟ Soil Preparation Base Mix Recipe: 5g per liter soil - Startrex 5g per liter soil - Silicium Flash Mixed thoroughly for optimal distribution 5x Fertilizer Tabs - strategically placed near bottom (20cm height) for autopot compatibility 1 tsp Mycotrex - applied directly in planting holes Bactrex solution - used for initial watering ๐Ÿ—๏ธ Layer Construction Bottom Layer (10cm): Drainage material (clay + perlite) Air Circulation: Airdomes positioned Growing Medium: Pre-mixed soil with embedded fertilizer tabs Root Zone: Mycotrex application + seedling placement Initial Watering: Bactrex solution โš™๏ธ System Activation โœ… Setup Complete - Autopot system now delivering automated water-only feeding From this point forward: Pure water automation via Autopot system ๐Ÿ™ Acknowledgments & Partnerships Special Thanks: Biotabs - Premium nutrient solutions ๐Ÿญ Puraplants - Autopot system provider ๐Ÿ’ฐ Exclusive Discount Codes ๐ŸŒ Puraplants (Hamburg, Germany) www.puraplants.de Code: GrowBigger โ†’ 10% OFF Biotabs Webshop biotabs.nl/en/shop Code: GDBT420 โ†’ 15% OFF