Likes
Comments
Share
bueno durante la mitad semana (18 días de su germinación) hacemos su trasplante a una maceta de 5 litros integrando a la maceta Micorrizas Wonderland de la cual se nota mucho el cambio al llegar a la tercera semana de vegetación como se puede ver en las fotos y videos. se nota como va agarrando fuerza. Otros de los fertilizantes agregados es solo tek grow (grotex) usando las medidas indicadas en en el envase. con esto seguimos avanzando nuestro proceso. Slds
Likes
29
Share
11/25: Still just a few pistils on the Skunk, and she hasn't hit her stride just yet. Strawberry Pie is still vegging and the shorty this run, but everybody else is stretching and flowering. 11/27: Fed today. 11/28: Strawberry Pie still not flowering. Starcandy and PE have stretched another 5 inches in 2 days.
Likes
22
Share
Day 7 : I think this girl is doing very well I don’t know on how she will finish off I’m hoping for a high yield 🤞🏻 Im happy how she has stacked very close together and I just want her to fatten up abit more 🌱 any suggestion or tip helps overdrive for the boost tomorrow 💧
Processing
Likes
12
Share
@Piablo
Follow
Lessons learned from week 1 of my first grow so far: the best watering solution I found so far is a mix of distilled water from the store and filtered tap water. with a final ph of 6 and ppm of 20-40. a little ph buffer goes a bloody long way. Use with caution. performing tasks like mixing solution and potting a germinated seed are best performed without a phone (camera) in one hand. the seed germinated within 24 hours using paper towels. I planted after 36 hours. After 24 hours of potting, the stem was already shooting up, and I turned on the lights, set to an 18 hour schedule. I wasn't quite ready for this, so it took me some time to research and get the desired humidity and temperature. At this point I added more nutrient in even quantities of FloraGro, FloraMicro, and FloraBloom, according to instructions. Perhaps a little early though, although after just one 18 hour light cycle this plant is shooting up like a rocket and showing leaves. I bought a fan for the inside of the tent and propped it up on a box, and a humidifier to bring the humidity from 40-50% to around 70%. Since it's a winter grow, I have to periodically increase the temperature to keep it at 25 °C. The intake fan, humidifier, and inside fan are significantly lowering the temperature. I'm also experimenting with finding the right humidifier settings since the humidity seems to increase a lot when the lights go out, and the machine is still new.
Likes
8
Share
All in all this was an amazing harvest I usually have around 8-10 plants and harvest anywhere from 24-36 ozs per harvest with the 8 plants I had this harvest including the biscotti mintz and cookies USA I ended up with 898g total dry weight with all top quality flower. I’ve learned some things with all my previous runs when it comes to dialing in my quality and yield and definitely watching for those herms because I like to push my plants to the max when it comes to training ! GMO PUnch -Greenpoint I’m giving this a total score of 7-10! Biscotti Mintz- Barney’s farm Total score 10-10 Cookies USA score 7-10
Likes
2
Share
Wakíŋyaŋ, I am who I am, the salt of the earth. Thunderbird is an allegory; his conflicts with other forces in nature are then an attempt to allegorize relationships observed in the natural order, such as the changing of the weather. He is essentially an attempt to represent the patterns of activity of a powerful, mysterious force in a way that can be understood simply and easily – sort of the way in which a weather map functions today. Moving from18x60x60 = 64,800 seconds in 18 hours. 64800x860(ppfd) = 55,728,000 umol per daylight. Into Flower 12x60x60 = 43,200 seconds in 12 hours. 43200x1145(ppfd) = 49,464,000 umol per daylight. It's asking a lot of Rubisco regeneration to maintain 50 DLI in the 12 instead of 18. Raised the ambient CO2 to 1200 to 1500 ppm to achieve efficient gas exchange. Not particularly recommended, but adding sugar to an indoor growing medium is a highly effective way to stimulate microbial activity, which rapidly breaks down the sugars and releases CO2 through cellular respiration. You can safely capture this CO2 to fertilize indoor crops and boost photosynthesis. While this process works, the setup requires precise understanding and management to avoid common indoor growing hazards. The plant Carbon to Nitrogen C:N ratio defines the balance between structural carbon (sugars/cellulose) and nitrogen (proteins/enzymes). It acts as a master regulator of plant health, growth, and metabolism. Rubisco (Ribulose-1,5-bisphosphate carboxylase/oxygenase) is the engine of photosynthesis responsible for fixing atmospheric CO2 into sugars. It is intimately tied to the C:N ratio for three primary reasons. It is the Plant’s Biggest Nitrogen Sink, Drives the Carbon Side, and it is the Nitrogen Control Knob. Understanding this relationship allows you to predict how plants respond to environmental stress or fertilizer. Rubisco acts as the primary storage sink for leaf nitrogen, accounting for up to 30% to 50% of a C3 plant's soluble protein. Deep Green Leaves signal a rich abundance of both chlorophyll and Rubisco proteins. The plant possesses the heavy enzymatic machinery required to handle 1145 PPFD. Pale or yellowing leaves indicate a nitrogen deficiency. The plant is actively breaking down its own Rubisco to salvage nitrogen for newer growth, drastically reducing its light-tolerance threshold. Subtle difference, but understanding is important in order to be able to judge when to dial light intensity up and light intensity down, when to push, and when to back off. An extra dose of magnesium is vital if a plant is going to push through the growing pains of high-intensity lighting. Foliar application of magnesium is an excellent and rapid way to assist with Rubisco regeneration within a plant, so long as it is applied correctly. Spray strictly in the early morning or late evening, mixing your magnesium with a little fulvic acid or chelator, but only when she gets a little limey on top. This, for me, is the experience of growing, akin to "riding the surf" maintaining efficient Rubisco regeneration through visual identification of the shade of green. Surf a razor-thin wave when balancing light intensity, nutrient availability, and transpiration to maximize Rubisco enzyme efficiency. Keeping the Calvin cycle fully charged without tipping into nutrient toxicity, light stress, or the dreaded chlorosis requires paying close attention to the visual cues the plant provides. By monitoring these subtle shifts in color, turgor pressure, and leaf posture, you adjust your environmental controls and surf that exact razor-thin wave. Nute recycling acts as the vital execution mechanism for autophagy, which defines senescence. Natural senescence is a genetically programmed developmental stage aimed at nutrient recycling, whereas triggered autophagy is a rapid survival response activated by environmental stress. While both processes utilize the vacuole to break down cellular material, their triggers, selectivity, and overall goals are entirely different. Cannabis plant senescence is not separate from nutrient recycling protocols; rather, nutrient recycling is the primary physiological purpose of senescence, and autophagy serves as the core switch mechanism executing both processes. Takes about 24 to 48 hours to notice visible changes once the signals have initiated the autophagic response. Not too late at all. A little bit of fade from senescence 2 weeks from harvest is normal and genetically expected. Send the C:N 32:1 signal 1 week from harvest for the best effect in your organic grow. Understanding what makes leaves fade is not always senescence, but also strongly linked to Rubisco regeneration. That's a whole other subject. Vital to understand the differences if you want a correct diagnosis and to transition from hobby grower to master stoner, differentiating between a true genetic fade and a decline in photosynthetic proteins. Nitrate is nitrate, whether it oxidizes or not is not up for debate. If it's not sunk by the plant you are smoking some if not all of, it's regardless of what your feelings are on the matter. Senescence is highly critical. It is the natural end-of-life stage where the plant redirects energy to ripen flowers. Properly managed, it breaks down harsh chlorophyll, allowing the terpenes (which provide taste and aroma) to peak. Harvesting outside this window leads to an "unripe" or degraded flavor comparable to going without. To initiate the response you seek, you can trigger it multiple ways, when growing synthetically its triggered by nutrient starvation, generally when the entire medium is flushed. This is more to do with N starvation than being entirely empty. Nonetheless. PK boosters are N starvation through maximizing P and K. (Generally only works for synthetic grows) Normally, a medium only holds 10-30% of its nitrogen as ammoniacal ta part boosts this to 50% as it triggers the "ripen" signal, but you don't want to keep ammoniacal above 30% for more than 7-10 days if you can help it. Its a trigger mechanism no more. PK BOOST with 50% ammoniacal N signals floral maturation. PK BOOST with N starvation signals nutrient recycling/sinking. Because you are using organic nutes and you want to maintain the rhizosphere, what you want to do is add carbon in the form of sugars (powdered molasses). It's almost impossible to empty a medium enough when microorganisms are constantly releasing nutrients into the direct EC. Very difficult to initiate starvation responses with ammoniacal nitrogen. Manipulating the C:N ratio is the key to triggering an autophagic response and resulting nutrient recycling in the last days using organic nutes and without having to flush. Generally not recommended for new growers. So do what you want. But if you don't trigger the plant to dump its nitrates into root zones, you will smoke nitrates as NO3- does not oxidize during the dry and cure no matter what you do or how long you dry or cure. Doesn't matter what anyone "feels" about it, how many grows they had with no fade. "Clover steals valuable nutrients." Crop and drop the clover come flipping to flower, its benefit comes from creating an airy and porous rootzone. I don't need to crop and drop once the plant fills the canopy, she blotches out the light, and the clovers die. This is the nitrogen the microorganisms use to convert carbon for respiration throughout the flowering stage.
Likes
9
Share
@Kushizlez
Follow
Harvest: Everything dried up to 347 grams + 96 grams of super high quality trim. Overall I am not too pleased with the smoke of the product. Although the bud size, bag appeal, smell and taste are pretty much all there, the shitty burn is a deal breaker for me and the majority of this weed is quite frankly useless. Another downside is while smoking I’ve found 4 seeds in an ounce from almost every strain. Light leaks? At least I learned a ton, including how to get super good burn for my next crop. I’m hoping that curing for a month or so will improve the burn but I wouldn’t really count on it. I have seen weed dried for 4 days with no cure and no flush smoke clean and not go out once. I have been told that the key to white ashes/clean burn is proper mineral content in the soil and there is tons of scientific studies on cigar ash going back 100 years. Plants grown in a medium with high levels of decomposing organic matter, phosphorus, magnesium, chlorine and heavy metal ratio tend to produce black/grey ash. Whereas plants grown in a medium with a higher ratio of trace minerals like calcium carbonate and potassium in the form of wood ash, rock dusts, oyster shell flour and lower levels of decomposing organic matter will produce a dense, uniform white ash that rarely goes out. But this is still all theory until I test it to confirm for myself a few times. My last few outdoor harvests did not improve with curing at all so I’m hoping this will be the missing link. Plain peat moss and coco clearly lack essential minerals that help burn. If said theory is correct I should find a synthetic nutrient line with more trace minerals. Makes me wonder if growing if rockwool/basalt rock could improve burn in a hydro setup. I think I did a fairly decent job for my first grow. I went wrong in a million different places but I still stuck it out and got some decent herb. Things went wrong early when I got black spot mold, nitrogen/magnesium deficiencies and powdery mildew. I corrected most of it but things didn’t get really bad until mid veg when I intentionally skipped a few feedings and defoliated quite heavily stunting the plants. I also didn’t even top or start LST until the 6-9th node which was really stupid and hurt my yield. My temperatures were all over the place from the learning curve. I was severely overwatering without realizing it. 100% peat moss is a shitty medium. I also fed way too late in flower (not what caused shitty burn). I also used synthetic nutrients in soil. Zkittlez bonsai Yield: 1.9g Smell: 7/10 - sweet, candy, berry, gassy, piney hints Bag appeal: 7/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent, needs curing High: 6/10 - indica dom Comment: looks nice, smells nice, tastes nice, burns like shit. 43.5/70 = 62% 👎🗑️ Black Garlic #1 Yield: 53.6 Smell: 8/10 - gassy, piney, earthy, skunky Bag appeal: 7/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 8/10 - thick, uniform white ash Fire holding: 7.510 - stays lit for 45+ sec Smoke: 7.5/10 - taste is good until the end High: 7/10 - sativa dom Comment: looks nice, smells nice, tastes nice, burns great but quite leafy. 52.5/70 = 75% 👍🔥 Black Garlic #2 Yield: 42.3 Smell: 7/10 - woody, earthy, tea Bag appeal: 6.5/10 - slightly leafy/stemy Crystal coverage: 7/10 - impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent, needs curing High: 8/10 - sativa dom Comment: looks nice, smells nice, tastes nice, burns like shit. 44.5/70 = 63% 👎🗑️ Zkittlez Yield: 39.4 Smell: 7/10 - sweet, candy, berry, gassy, piney hints Bag appeal: 6.5/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 8/10 - thick, uniform white ashes Fire holding: 8/10 - stays lit for seconds Smoke: 7.5/10 - taste is decent, needs curing High: 7/10 - indica dom Comment: looks nice, smells nice, tastes nice, burns great but smalls didn’t fill out. 51.5/70 = 73% 👍🔥 Blackberry Breath #1 Yield: 57.5 Smell: 9/10 - sweet, grape, berry, gassy, earthy, hashy Bag appeal: 8.5/10 - dense, sparkly buds Crystal coverage: 9/10 - super impressed Ash: 5/10 - flaky, mostly grey/blackish Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 5/10 - tastes like chalky shit High: 6/10 - indica dom Comment: looks amazing, smells amazing, tastes like shit, burns like shit. 46.5/70 = 66% 👎🗑️ Blackberry Breath #2 Yield: 76.1g Smell: 6/10 - musky, tea, berry, herbal Bag appeal: 8/10 - slightly leafy/stemy Crystal coverage: 7.5/10 - very impressed Ash: 5/10 - flaky, mostly grey/black Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 5/10 - taste is shit High: 6/10 - indica dom Comment: looks nice, smells shitty, tastes shitty, burns like shit. 41.5/70 = 59% 👎🗑️ Slurricane #4 Yield: 34.5g Smell: 8.5/10 - gassy, deep piney, fuel, earthy, Bag appeal: 8.510 - slightly leafy/stemy Crystal coverage: 7.510 - impressed Ash: 6/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent High: 6/10 - indica dom Comment: looks amazing, smells amazing, tastes nice, burns like shit. 46.5/70 = 66% 👎🗑️ Badazz OG Cheese Yield: 43.5g Smell: 6.5/10 - musty, woody, cheesy, piney hints Bag appeal: 6/10 - slightly leafy/stemy Crystal coverage: 6/10 - very impressed Ash: 5/10 - flaky, mostly white/grey Fire holding: 4/10 - stays lit for 10-30 seconds Smoke: 6/10 - taste is decent High: 6/10 - sativa dom Comment: looks like shit, smells decent, tastes decent, burns like shit. 39.5/70 = 56% 👎🗑️
Likes
5
Share
Voilà tous et coupé, une odeur de fruit tropical et de bonbon embaume la pièce et les pièce avoisinantes, hâte de goûter ça 😍
Likes
4
Share
@pzwags420
Follow
Day 1 week 1 flower I switched my lights to 12/12 as my clones were getting taller then I would like so I flipped them a little earlier then intended. On day 3 I defoliated lower growth(suckers) to focus growth towards top of the canopy. On day 4 I changed out my reservoir and added my flower nutes. On day 6 I defoliated my plants to increase air flow lower in the canopy. On day 7 of week 1 flower the clones are doing well. They are still stretching, the leaves look really healthy and I can see the beginning of flower clusters forming.
Likes
14
Share
@Rlhjr413
Follow
Mid week as always due to flip day and my schedule. One reddi whip on track other 11 taken there time. 1 of 10 dantes wrath just will not keep color its burning or draining nutrients rapidly. Wish reddi whip whole catch up with dantes wrath so they atleast can be pulled on same day.
Likes
13
Share
Day 48 Gelato - day 48 - Defoliation was done. The broken branch healed and sprouted new branches. She cannot boast much about his height. But it is very beautiful, I hope we will grow 50 centimeters in flowering 👌 Day 44 Peyote - The growth process continues unabated. I am waiting for the desired size. 8 days after flowering it didn't grow as much as I thought it would, so we went back to the growing season. 👽 Day 49 Peyote - I decided not to cut the leaves anymore after much defoliation. It easily tolerates strong stress easy to grow.
Processing
Likes
1
Share
They are looking real good. I think I may have gotten some nutrients on one plants leaves and it caused some yellowing and leaf curl, I’m hoping it straightens out.
Likes
4
Share
The plant in the middle seems to be ahead of the 2 on the side. However all 3 plants are in preflower. Even the faster Pheno is growing slower than other autos I’ve grown. This is a slow growing strain for an auto but that’s alright been defoliating and pruning the plant gently as needed. Also, I used joint ash from my ash tray as a potassium boost. I was careful to make sure it was just weed in there but it works I think. I’ve used it b4
Likes
5
Share
Final week here. Another really good run. Gonna chop around day 73.
Likes
12
Share
@NONSENSE
Follow
Good day to every one. The plant feeling like it should be, flowering without any problem. I really like the genetic. Hope to finish within 2 weeks. Look at these beautiful and long inflorescences, which are covered with crystals every day and pull their antennae to the sides. trichomes change color. The aroma is tolerable and I am not using the filter yet.
Likes
3
Share
@sellem
Follow
Here we are again! Flower Switch happened on Day 37, so in the middle of week 6, but for simplicity, i will condense the last Days of Veg into this here week 6. So a few days are missing from the final week count as i want to keep flowering weeks seperated from weg. Just keep in mind that she's about 3 days older then the week here would suggest. Its the end of the first flowering week and we can already spot lots of pistils, and the tops are getting ready to bud up! I defoliated her once before the flip and once on Day 43 because im scissor happy. Also, she was getting REALLY bushy, as you can see on the timelapse. Feeding is still the same 6L, around 6.0 PH, 5ml/L Grow and 1ml/L powerrots, will keep that going as long as shes stretching, then ill switch to flower nutes. Happens now every 3 days, though i suspect that it might be every 2 days soon, she is getting hungry. Pot is already somewhat light again and i watered her yesterday at the time of writing 😱😮
Likes
77
Share
I'm so excited I have a purple phenotype! I've wanted one for the past year 💜 The flowers are coming along - putting that carbon filter to use 😁 *I hope I'm not infringing on any rules about the music video. I'm very excited about a purple phenotype - I put some music on while updating my GD & this song started playing on YouTube autoplay. 🤣 I had to edit it & add it.*