Likes
Comments
Share
Sixth week of flowering, everything is going well, it has a very strong sweet citrus smell
Likes
4
Share
@Hommero75
Follow
The ladies are doing a lot better this week. They got fed and cal-mag . Banana Purple Punch and Forbidden Runtz finally are developing and growing. Slowly but surely.
Likes
148
Share
@BioBuds
Follow
This week I tried to let them go, only did some gnat hunting with the vacuum to keep populations down. Sunshine found a great way to hold the plant down with some thrift store Christmas light fixtures. At the end of this week, I tied the remaining upward stalks down and away. The final bits of training before we can hopefully go towards flowering coming week. I did some foliar feeding also to help the soil dry out a bit, also to fight the gnats. Maybe overdid it a bit with a few yellow points on the leaves. On to flowering!!
Likes
36
Share
@SAC87
Follow
Hi Growers. So all 3 FastBuds Blue Dream Auto seeds popped in less than 3 days. I’ve left them uncovered, added a humidifier and turned a fan on low to just to give them a little wiggle. They were sprayed and lightly watered in a 4” circle around the stalks to have those roots go search for water. One of the seeds hulls is still stuck to the cotyledon leaves. I’ve been spraying it to keep the membrane moist and hopefully she’ll split it open by herself. In the past when I’ve tried to remove them they cause damage to the leaves so we’ll wait and see. Just gonna give them some time and mist for a week and start super low feeding according to the FastBuds auto feed schedule. I’m looking forward to seeing these babies grow!!! Happy Growing 🌱
Likes
7
Share
So far another one of Fastbuds finest growing perfect not having any problems or issues. Sorry haven't updated lately guys been super busy with work and hadn't got a chance but I'm back at it and will be so stay tuned. This girl I had to switch over to 12/12 (cause I'm growing her in a tent with photoperiods that needed to switch) gonna see how she does with the shorter days but so far she seems to be responding well to it(next run will be all autos with 20/4 so as to compare this strains performance with the different lighting schedules).
Likes
40
Share
Questa bella ragazza, ci ha lasciato letteralmente a bocca aperta. Dopo un piccolo problema durante le prime settimane di vita (foglie che presentavano punte ad artiglio verso il basso), la BISCOTTI 🍪, ha saputo riprendersi velocemente producendo dei buds gonfi e grossi! La cima principale era talmente grande che al suo interno ho trovato un pochino di principio di marciume, prontamente rimosso. Molto forte il suo odore durante l'essicazione.
Likes
7
Share
@Evil89
Follow
Here we are with the 5th (and last) week of veg! Finally I transplant the Queens in their definitive home. Queen #5 wants to be different, so she decide to top herself in a particular way. I really like her shape and all the branches all around! I have to change the light setup for the flowering stage, but I don't know if the box will be able to hold up two cooltube reflectors: I hope it won't implode for too much weight. See you for the 1st flowering week :)
Likes
2
Share
Likes
38
Share
@Lukush
Follow
Hey growmies, happy with the results till know, this strain is a special one for me , always wanted to test a Apple 🍎 strain ! Can't wait Hope you all enjoy mi diarie and if you do hit that like button or leave a comment below thanks very much for the support have a good one growmies
Likes
16
Share
Vamos familia que finalizamos la séptima semana de floración de las Blueberry Cheese de ZambezaSeeds. Ya esta es la última semana que van a recibir la alimentación de Agrobeta. A partir de esta semana solo estarán a Agua. Progresan muy bien las flores están hermosas y bien resinosas, estoy muy contento con el resultado hasta ahora. Y os digo que pronto empezaré a germinar lo del nuevo proyecto. Seguro que os gusta son variedades bastante top. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 45%/55% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.
Likes
8
Share
@Naujas
Follow
77 dienos!!!! Oho, mergytė tiesiog nuostabi :) ji puikiai atsigavo po HST ir lapų valymo :) Mergytė labai džiaugiasi gavusi visavertę mitybą su @Plagron - jai tai patinka :) 6,3 pH vanduo su 1100 ppm :) Sėkmės visiems!:).
Likes
29
Share
2 part Harvest. 95+ Grams I got from this pheno. Took about a week to find the bottom 3rd. She is lovely, gasey & fruity. Smooth smoke with a lil bite to the back of my throat. Xpert nutrients did 90-95% of this grow. Love 'em. Will definitely be a fastbud do over. I wouldn't mind a few jars of this. 9.5☆
Processing
Likes
3
Share
@camo420
Follow
NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 4x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix
Likes
1
Share
Trying to dial their veg in. Nutes may be too old or too high. Changed with 4ml CaMg per gallon of RO water. The rest is MaxiGrow. Ever since adding rockwool to the grow, I have struggled. I don't have the dry back timed right yet. I moved my fan to dry the top of the pot surface instead of in the root zone or at the canopy height. After about 10 days I dumped out the rockwool and have replaced with hydroton. My initial though on using rockwool was to give the roots more space during late life stages. My experience has been with hydroton and I notice that the roots eventually get bound because the hydroton is a durable material and will not crush or compact. Rockwool on the other hand will compress when squeezed so I was hoping that in the late life stages the roots would compress the rockwool and make more room in the pots. The issue was dryback. If I used chunks instead of croutons, this may help but the other reason I used them was because I had them here already. If anyone is trying to slow their dryback down, they should consider adding 10% volume of croutons to hold moisture in the medium a bit longer. Notice anything different? They are starting to adapt to their new media. Hopefully by next week I can get them to perk up. One plant has looked better than the other three. I have no idea what these plants need to “perk up”. Possibly a different grower. If a grape terpine wasn’t in the end results I would have culled these long ago. Hopefully they perk up when we get to flower. 3 look ,,,, meh, the fourth is descent. Trimmed all four back down to 12” tall. Flower next week.
Likes
16
Share
This is the final week of feeding, hopefully the plants will be ready to harvest in a few weeks. After flushing only Purpinator and Fulltilt will be used in this week.
Likes
17
Share
@BLAZED
Follow
Week 10 (3-4 to 9-4) 3-4 Temperature: 22.5 degrees (lights on) 19.3 degrees (lights off) Humidity: 64% (highest) 59% (lowest) 4-4 Temperature: 22.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 66% (highest) 59% (lowest) 5-4 Temperature: 23.4 degrees (lights on) 20.1 degrees (lights off) Humidity: 64% (highest) 56% (lowest) No pictures. 6-4 Temperature: 24.4 degrees (lights on) 20.7 degrees (lights off) Humidity: 64% (highest) 55% (lowest) It looks like the plants are doing better since they havent got any water the past couple of days. Today i decided to heavily defoliate the plants. I also found a old feeding schedule from Green House with PH values, and it recommends that i should give an PH of 5.7 on coco. I thought PH 6 was good, but i was wrong, maybe this in combination with the plants being too wet, is the reason for the weird growing leaves, and the problems they show. I cleaned the reservoir and made sure there is no old water in the lines. I made a full strength 10L feed, and added it to the reservoir. I turned the reservoir on for around 3 mins, just to the point that the AutoPot trays are full of water and the valves are shutting them off, then i turn the reservoir off. I will do this every other day, so 1 time in 2 days. 7-4 Temperature: 25.7 degrees (lights on) 22.1 degrees (lights off) Humidity: 64% (highest) 50% (lowest) 8-4 Temperature: 26.4 degrees (lights on) 22.4 degrees (lights off) Humidity: 64% (highest) 55% (lowest) Today i turned on the reservoir for 3 minutes again, just till the trays are full of water. 9-4 Temperature: 25.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 51% (lowest) No pictures.
Likes
134
Share
@Herbalize
Follow
Hello folks Havest Day 64 of flowering ( Life cycle 99 days ) Drying with 62% RH--18/21°C since 10 Days Now everything is in jar and in a week or more, I would add my little boveda 62% for a good storage Overall everything went well ! I fell in love with this strain and she will come back quickly in my growroom 😍 The Remo Chemo 1 give me 96g of dry buds The Remo Chemo 2 give me 89g a very good weight knowing that they are described as a small producer Thanks to all who comment / like either to encourage or give advice GD community are The Best 🙏😻 see you soon guys 😘 Peace Love and Weed0
Likes
160
Share
@Cauli
Follow
Week thirteen for the Sticky Broccolis. Day 39 of 12/12. #1: Well, did not take her out of the tent for pictures this week cause she will surely fall in all directions. This one is huge and looks like she will get some really long and big buds. But this will be a very tight finish for the contest. She just got five weeks left when there should be some dry buds shown … let's see if she'll make it in time! #2 This one is still going strong. Bud development and resin production are on a high level and just hoping for a smooth finish. Had to fix her up a bit to stabilize her already but despite this there wasn't much to do :)
Likes
9
Share
Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁
Likes
3
Share
@Lazuli
Follow
I gave her just now one last defoliation to push this final week (i wish i could give 2 more weeks) Anyway this pheno is pure gold Super dense budz and huge yield this will definitly be 150g dry