-

Lil younging coming good towards the end of the week jus decided to send dem to flower...get a lil smoke and allow the mother to continue do their thing until cut day...other than that everything is going accordingly also got back 1 of the plants that I had sent on a breeder project she's full of pollen sack now(female chromosome only) should have some feminized seeds once all goes well...gonna double up the breed and also do a

This plant looks stunning, I love this strain, I enjoyed a lot last year, her flowers are absolutely 🔝 quality, and I love that strange sweet gasoline smell, I can't wait to transplant this lady and make her become a nice bush like I did last year, this lady has been Transplanted on day 34 since planted may 5th! Can't wait to start training this lady!

Week 3: VEGETATION It was a completely disastrous week. The growth is just pitiful.? At first, I thought it was just because of the admittedly lousy weather.❄️ We had everything from heavy rain to snow. But apparently, that wasn’t the main problem. It was actually the seedling pot that I had placed completely inside the final pot, still in its sleeve. So on the third day of this week, I took the little plant out and discovered that the roots couldn’t break through the sleeve and the soil inside was hard as a rock.? I removed the sleeve and tried to gently loosen the coconut fibers, then carefully placed the little lemonade back into the soil. It definitely won’t be a giant anymore, but I hope it recovers. It deserves a chance. Even if it doesn’t become a Supergrow... I own up to my mistakes.😄😅 But I have to admit, a second Purple Lemonade is currently sprouting so I’ll have a replacement in case this one doesn’t make it.?

😅 Another Hot Week 🌶️🌶️🌶️ High temperatures 🌡️🌡️🌡️and lots of sun 🌞🌞🌞 and no rain 🌧️ ➡️ The buds are ripe and ready to harvest 🌰 ➡️ Exquisite aromas of sweet mandarin, clementines, lemon verbena, and oranges. 🍊🍋 ➡️ Just a little water at the beginning of the day 💧💧💧 📍 Plant #1 (140cm) is the biggest plant and probably the best yielder. Huge fat buds 😆 📍 Plant #2 (128cm) is also a very nice plant, but slightly less fat buds 📍 Plant #3 (111cm) is less impressive plant. Her pistils are orange-brownish-red, therefore clearly a different phenotype than the others Eight week of Light Deprivation 👉👉👉👉Every morning at 9:00 am I move the plants to the greenhouse. 👉👉👉👉Every evening at 9:00 pm I move the plants (together with some other strains) inside the growroom (which I don't use in the summer)

Tag 44: getoppt an 4 Zweigen. Tag 47: Ich gebe Alg a mic zur Hitzestress Behandlung ins gießwasser, die Pflanze ist an machen Stellen schon recht hell geworden, aber draußen wird es auch bald Kühler.

Hi folks, I'm coming here to start the process of ending this grow journal. I harvested about three months ago and the weed is definitely cured. Photos are about to come — I'm doing a real studio photo shoot for those buds, they deserve it! While waiting for the shots, I made some pretty damn dank hash temple balls using the iced water extraction method (solvent-free) with my little washing machine. It's a mix of the 8 strains I grew here — never ideal to mix different kinds of resin... but man, this is some serious dedicated work, so I'm making myself happy with that 14g shiny temple ball in the end 😉 Here are a few details about my process for you guys (and don't forget — you can do it with fresh material! Fresh frozen is always tastier. Also, the drying process is much more efficient and faster with a freeze dryer, but... you need the budget for that. I don't, so I go with the air drying method — check it out below): 1. Get your dry trim, then cure it properly for at least a month (I did 3 months). Smell it — mmh, sweet, dried to perfection. ✅ 2. Freeze it, delicately wrapped in a freezer bag. 3. Let a large amount of tap water sit for at least 24h to remove chemicals like chlorine, then use it to make plenty of ice cubes — don't be shy, especially if you're not working in a cool environment. 4. Prep your washing machine: add trim between two layers of ice, fill up with clean water (as much as you can, large vortex is better than a smaller one), then make it seat for 30 min (45 min for thicker buds) the time that the dried green material gets wet again. 5. Prep your filtering tools: catch bag, different mesh bags, spoon, etc. 6. Wash as many times as you can before green contaminants appear, as these lower the quality of your hash — don't hesitate to go up to 8 to 12 washes if the resin still looks clean! Important: each wash has its own specific duration, and they get progressively longer as you advance through the process. Frenchy Cannoli (a true hash legend) provides a detailed timetable for this — from as little as 30 seconds to 1 minute for the first wash, all the way up to around 25 minutes by wash 8. Make sure to follow that schedule rather than using the same duration for every run or running it too long the first wash !! It could breaks to quickly your precious material before you collect all the trich's and the quality would be lower in the end. 7. Collect the wet resin in the mesh bags with a frozen metal spoon, make patties with the resin, and let them sit over some towels in order to drain as much water as possible (place a tissue made for hash collecting over the towel). 8. When the patties are a little dry to the touch, wrap them as they are in the tissue and place them in the freezer for 48h or more. 9. With an iron strainer, microplane your patties over the biggest flat surface you can get! It's important that your micro pieces of hash dry widely and don't get too compacted. Any failure in the air drying process will nucleate rot, ruining your hash in the end and making it a poor product — eventually something to throw away. Sad when you think about all the phases of the process to get to this point! 10. So, in order to air dry properly, you must — it's not optional — lower the RH of your dry room to 35% or slightly below, never above and let it dry as long as needed until the material feels like dry sand. For myself, I found 10 to 15 days is ideal. The room must be very lightly ventilated (not directly on your resin!) and in complete darkness — the goal is to preserve all those delicious terpenes! Ideally, temps around 60°F or 16°C 11. Now that it's dry, collect your resin with a large thin spatula! Make a little mound between two layers of PaperHash, boil some water, and fill up a wine bottle with it! ⚠️ From this point on, to avoid exposing your carefully dried resin to a more humid environment — which could ruin all your hard work — everything must happen in the same drying room. Keep working at 35% RH until your temple ball is tightly and airtight wrapped in PaperHash. (And don't forget to drink water — it's dry in there! 💧) 12. Start to slowly press your resin. Magical moment. Finally.... 13. Press 3 times for 10 to 15 minutes in order to really decarb your hash — because that's what it's all about! Between each press, try as best you can to shape a patty... until the final press, when you'll be able to form that magical shiny temple ball (it only shines with gloves on, guys 😄) 14. You are now allowed to try it — for quality control purposes only, of course! 15. Because you want to age your hash for the sweetest 5-star smoking experience: wrap your temple ball in a large piece of PaperHash — if you can get that brand it's ideal, or another kind (check https://thepressclub.co) as long as it's organic! 16. Place the wrapped temple ball in a glass jar and store it in a dark, cool place. 17. Wait a minimum of 3 months before opening it. 18. Open, smell, touch — you'll be amazed. Roll it up with some weed or tobacco or both (I do both) / Or get a Hooka... you are smoking some true primo aged hash made by yourself! Taste the difference and realize all the path from choosing the seeds online until this first amazing puff ... 🙏 I want to credit my inspiration for making this kind of hash to the great Frenchy Cannoli, who has shared all his knowledge through amazingly rich tutorial content that you can find online with a bit of searching. 😉 Peace Frenchy 🕊️☮️

Hey Cannafam, Well we've come to end for my Gauva gal and today i've decided to harvest. We are expecting some bad weather starting tomorrow for the week, and i don't want her to get ruined. Trichomes are mostly cloudy with a few clears and its best to harvest slightly early rather than run the budrot gauntlet! The weather has been a good deal cooler over the past week and this had been a good turn as her her leaves have rapidly changed colour, shes rapidly turned into a dark purple, pink and red beauty 😊 Temps for Wednesday/Thursday were 22c day 14c night with rain on both days, but it has been dry since with nice sun. Friday to today 20c in the day and dropping down to 12c at night. Humidity has remained generally high for most of the week at an average of 75%, although this has now come down to 53% for today, and daylight is at 13 hours 59 minutes. Shes had one feed at the beginning of the week and plain waterings since. Her buds have filled out and are looking nice and chunky. Smell is a nice kinda fruity sugary candy waft which is very pleasant but not overpowering. For the harvest ive taken the bigger fan leaves and also a few of the larger sugar leaves, shes been hung up in the garage for drying, which i anticipate take a couple of weeks and il then do a dry trim. I don't have hanging scales for wet weight but i'l give the final result when dry. Throughout this gal has been absolutely solid and i would definitely grow again, but i may try another of the FastBuds/Mephisto crosses next year outside as from what i've seen they are a strong marriage 💪💪💪 Until the final update, thank you to anyone who has liked or commented. I hope you have enjoyed this diary and may you be happy and well 😊✌️💚

La fioritura sta procedendo molto bene e gli strains crescono ancora hanno risposto bene alla tecnica di lst e defogliazione. Run off 1.6 Ph 6.2

2nd week in the big tent, not overly happy with the progress , some plants are coping better than others, seem to be getting curling/yellowing leafs? hoping that by next week they will be in full swing, one night the heater cut out and the room went down to 13c, don’t suppose that will have helped

This lady hasn't stretched up so much during pre flower, she has a nice size anyways and I cannot smell any terpenes yet on day 23 of flower, I cannot wait to see how this lady develops some big and sticky flowers! Stay with me on this journey guys! Let's keep on growing!, 💛💚❤️👨‍🌾🔝

Final week of veg. Seems like a lot went on. As you can see, the canopy is virtual all even. The branches that were tied down 3 weeks ago were allowed to let go and reach for the light. In contrast, the taller and much stronger branches now became tied down. This took some work - these branches are thick and sturdy - pulling on them too much I am afraid will detach them from the trunk. That happened to the Gelato. It took a little bit of repositioning the wire garden ties everyday to achieve this. I'm happy to send them into flower like this. Speaking of Gelato. Her soil has been hot from the beginning. She has shown signs of high nitrogen levels and the run off from the pot is never clear. I purposely held off from feeding her nutrients bc of this, until this week. A day after feeding veg nutrients at 50% strength, there was yellow-browning and burning new growth leaf tips. This occurred for about 24 hrs on a few leaves then did not get worse. Next watering cycle will get only cal mag. Of note, the pH of any liquid going into Gelato has been consistently at 6.5. A few notes about the environmental conditions. According to VPD charts, the temperature / relative humidity ratio has not been ideal for vegetation. What would have improved the environment would have been the addition of a humidifier to reach about 60% RH at temps around 65 degrees F. Now, we are on to flower...

Hello 👋 👋 👋 As a 29th day arrived inside the tent there are many changes 😇 💪 🙏 Purple and Cinderella start flowering a week before Bruce Banner but all girls have got similar high 😇 💪 🙏 63 cm was taken from B.B 😁 All of my beauties expanding in size, flowers sites start to taking a mass and density. Some brown spots shows on humidity effected leafs so I removed them to control a healthy conditions 💪 💪 💪 Update: Day 30 Ladies definitely goes in flowering stage, every day I can observe a massive size and high changes. It's look like the tent will be full of buds soon. I'm very happy to see a purple colour on my Purple Lemonade. I'm excited because this is my first purple strain 😇 🙏 😇 Day 32 I have to move a girls a little to adjust them for better space use. I love to look on them 😍 Spec. Mars-Hydro TSW2000 100% power RAM mix flow 199m3/h Humidity 58% - 65% Have a fantastic day, You Lovely Girls Growers 😇 😇 😇

Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Elementz: Presentamos Elementz: Unleash The Elemental Fusion, una oferta trascendente de Anesia Seeds que te atrae al corazón mismo del reino elemental. Esta maravilla feminizada surge de un linaje de genética formidable, que combina la potencia incomparable de GM-UhOh con la energía vibrante de Epic Buzz. Prepárate para ser catapultado a la estratosfera, ya que Elementz cuenta con un extraordinario contenido de THC que oscila entre el 33 y el 38%. Cada inhalación es una odisea, con un perfil de sabor que entrelaza intrincadamente notas de uva madura, frutas exóticas y un toque especiado, creando una experiencia sensorial tan compleja como deliciosa. 🌻🚀 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%

Hey everyone, I meant to post this update yesterday, but I was really busy. Anyway, here she is! She's doing great, although still a bit darker than I'd like, which might just be her genetics. Overall, I'm really happy with how things are going for my first grow. There are definitely some things I could have done to improve this run. The top buds aren't as fat as I hoped, probably because there are so many tops and bud sites under the canopy that aren't getting enough PPFD. This seems to be causing the plant to direct quite a lot of energy to the lower buds, leaving the top colas not getting 100% of the energy they need. But hey, we learn as we go, and this first run has taught me a lot. I'm aiming for at least 4 ounces, but honestly, she doesn't look like she's producing that much weight at the moment. Fingers crossed these buds juice up and double in size within these last two weeks! Thanks for following along and for all the support! 🌱✨

🌱✨ Here are our girls in their seventh week! 🎉🍀🌿 These beauties are thriving, and their growth has been incredible! 🌟 I defoliate them every three days ✂️✨ because they grow leaves super fast 🍃⚡, often covering the stems.As we’ve mentioned before, we’re growing them horizontally 🌿🔄 to prepare for the scrog , ensuring we cover the entire perimeter perfectly. This method helps maximize light exposure ☀️🌟 and promotes even growth. They’re absolutely loving it! 💚 As I’ve said, this is the power of soil 🌍💎 and the right fertilizer 🍴🌿—the perfect combo for happy, healthy plants. 🌟✨ Follow our diaries 📔👀 and be part of this journey—you’re going to see some really cool changes in the cannabis culture! 🚀🌸🔥 Stay tuned, friends! 👊💚✨

Things are looking great! Gearing up for flowering soon! Getting pumped! 😃☀️