Check the winners The Grow Awards 2026 🏆
Likes
Comments
Share
@djsalin
Follow
Added one gallon of water with 1 tsp of MaxiGro mixed in. Topped/defoliated. Fixed grow light, and replaced 3 dead LED chips with full spectrum LED chips.
Processing
Likes
7
Share
@Yukagrls
Follow
She is growing healthy and strong. I turned her around a little bit, because they start moving around and I read that is good for them. I hope the pictures can show how fast she is growing. :)
Likes
7
Share
Third week of taking highcal+mg with the flu. plantProd MJ is great.
Likes
59
Share
@AHG2020
Follow
Forbidden runtz is on its flush for harvest, fading away nicely and showing a few ambers now, hopefully just a week left as she absolutely stinks! I must need a new carbon filter because I can smell her from the garden now 😬😂. Og kush is coming along nicely now, starting to pack on some size in the buds. I upped the last feed and a couple of days later her tips were burnt so I gave her 4 litres of ph 6.4 water to get rid of some of the excess before her next feed. The sooner the FR is finished the better because she really needs spread out the colas are too close together! 21/8/21- both ph 6.4 water only. 23/8/21- fr final watering. 25/8/21- og kush feed.
Likes
64
Share
Hey everyone 🤗 It's getting full of buds 😍. When you open the tent, an extreme smell of Blue Gelato wafts through the room 😍. They develop super fast, look beautiful and hardly stop :-). Next week I'll go down a bit with the Ec. I wish you a lot fun with the update, stay healthy and let it grow 🌱👌 You can buy this Strain at : https://www.barneysfarm.com Strain : Blue gelato 41 clone from mother (Barney's Farm) ☝️ Genetics: Blueberry x Thin Mint Girl Scout Cookies x Sunset Sherbert 👍 Vega lamp: 2 x Todogrow LED HLG Quantum Board 100 W ( 200 W ) 💡 Flower lamp: 2x Todogrow LED CXB3590 205 W = ( 410 W ) 💡 ☝️ Soil : Canna Terra Professional + ☝️ Fertilizer: Canna Terra Vega , Canna Terra Flores , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Ph - to 6.0 - 6.3 💦 💧
Likes
11
Share
Likes
20
Share
For the Herbies contest - https://growdiaries.com/diaries/157348-grow-journal-by-dabbertglobberfield#gallery=6777378 - Grandmommy Purple is guilty multiple noise violations for being too loud and for stanky funk. Harvest - 169 days / 66 days in flower Well, we did it. I made it to the end. All I can think is...WOW that was A LOT of work. But I think I had very good results for a first time grower. I For harvest, we took Plant B and D and prepared them for immediate freezing. Altogether, I ended up with 1212g wet on plant B and 1089g wet on plant D. I ended up freezing 1816g of this. There was some from each of these plants that was set aside from freezing because, for whatever reason, I thought they were not worthy of washing because of how progressed the leaf damage was from the root rot battle. So that was cut up and dried as nuggets instead of hanging like the rest. Sawtooth and Plant C were both harvested and hung in the tent to dry for 12-13 days. I think I overdried by 1-2 days because when I jarred them they struggled to raise up to 55%. So I am using rh% packs. After drying Sawtooth and plant C, I ended up at 459.8g for dried flower and 170.8g in dried trim. So just over 1lbs between the 2 plants and 4.15lbs wet between the other 2 plants that was washed for hash. So... are you for real with the effort involved with washing bud for bubble hash? I don't think I would do this in the warmth. I only pursued doing bubble hash cause it's cold right now and I figured that would really help. Even in the 30s(fahrenheit) stuff would stick. It's hilarious how sticky of a process this is. I hope you have a bunch of gloves, water, and ice to burn through. I went through over 60 gallons of distilled water and 80lbs of ice to wash the 4 lbs. I am envious of people in videos using a hose to collect, clean, and refill. Also, doing this as a 1 person show is the definition of insanity. I broke the washings up into 3 parts. The first part was was the tester wash. I broke off 420g of plant D's 848gs available. I used 7 bags to see where I would end up. I used 220, 160, 120, 90, 73, 45, 25. What I determined was that if I was hunting a specific micron with a lot of material this would help find what you can get. But for the next washing I reduced the amount of bags to 4; 220, 160, 45, 25. The time, with the 4 bags, I washed with 809g. I had a much more favorable experience and return this second time but I had green fast and probably used too much ice. The 3rd wash was the remaining 631g and I found an extra 137g I added of sugar leaves and trim, brining the 3rd wash to 768g. I used 5 bags this time; 220, 160, 73, 45, 25. By the 3rd wash I have become an expert in collection but also never want to do it again. lol. 2 of the 3 washes have dried and I have 43.4g of bubble and 2.8g of dry sift. 37.4g of that bubble is able to be pressed into rosin. I will probably press that dry sift as well. The other stuff is 25u or 160u that I will experiment with or cook with. The other stuff is drying so I can't add it all in. I pressed a bunch of trim and some flower. The trim presses nice and the dab is decent. I am working out a good temp for the flower. But the problem with all these tests to find the sweet spot is that I have all these testers to go through but want to keep pressing and trying that! I think I will need to work on a better storage solution. I can't wait for the fresh frozen bubble hash rosin pressing... I have over 20gs of bubble to put in one bag. I am really looking forward to this. But I will need to work up to that pressing since I have never pressed hash/kief/bubble before in my rosin press. So this should be really fun. I will 100% post an update of the hash pressing once I do that and also after the 3rd wash session is done drying. In closing, saying I learned a lot from this grow would be an understatement. I fully expect to start it back up in a few weeks after some R&R then some R&D. There's some things I will need to work on before I start again, such as: having a single external reservoir that feeds multiple plants, hard to clog and easy to use ebb and flow system, miscellaneous final run stuff like space for drying. So thanks everyone for hanging out and perusing the photos and or reading all my huge rambling updates and thanks to those for the help along the way.
Likes
7
Share
Hi ! It's a now a monster with a calcium deficiency but she's okay !
Likes
3
Share
So the very small plant that had a couple of bud I took it down, and was pretty surprised by the potantcy. Now the other 3 plants are doing pretty good and they look very nice, and now I know what not to do with my grow and why they ended up so small, and thanks to the comments. On plant #2 I believe that I'm about a week more and can be harvested and plant#3 looks about the same and plant #4 could be about another week or two
Likes
3
Share
Deep watering on Sundays (buildaflower compost tea) Moist watering on Wednesdays ( vitamin c water & jay plantspeaker ) Cut down 3 hermies from light leak 2 charmz 1 Apple fritter
Likes
6
Share
Buds starting now. Seem a bit slow. Keeping an eye on environment. Possibly bit cold when lights off
Likes
6
Share
Since I can no longer get the humidity below 58% and the rust spots on some of the sugar leaves are getting bigger, I decided to harvest . Unfortunately I couldn't wait for the perfect time, so luckily I don't have any clear trichomes , about 75% cloudy ones and the rest amber. 67 Day's from Seed to Harvest
Processing
Likes
10
Share
@DonPablo_
Follow
buds are very visible and getting some mass (still really small though) and really satisfied with the number of bud sites. REALLY REALLY can't wait to harvest these ladies. P.S. the plant at the end of the last video is an autoflower we planted a few weeks ago.
Likes
62
Share
Hey guys and welcome to start of Week 8! 🌻 Today is day 21 of flower so i went ahead and cut most of the plats Fanleaves off. It took a while but now the Airmovement is improved and the humidity should also be lower. I also hope I didn‘t stress them too much. From now on they will be reseaving less and less Nitrogen going forward. I hope the colours come through as well 🤞🏻 Thanks for following along and I will keep updating the progress. Happy growing 🍀
Likes
1
Share
100% germination rate, they popped really quick. Threw them in the tent 1st December - Light is currently on ~70% as they would be getting too cold if I get lower. 4.12 : 5/6 broke the surface one Zerberry is missing but will surely follow the next days. 7.12 : all on surface right on track. Stay tuned!