Pistols, Pistols, Pistols, seen the flowers began to develop, she stretched lot last night, feb7-8 ir video uploaded. Took all the excess leaves off my girl

And we are done! Both plants have now been chopped after 48hours darkness. Now currently drying. I will post some close up harvest shots once bud is dry :)

Day 21: They did grow a bit. The weather continues to be bad. It's like 10 to 12 degrees at night and daytime it is like 15 to 20. It will stay like this for another 2 weeks. There is not much I can do for now like LST because they are not stretching, neighter the newer branches. Hopefully they will grow larger but I don't expect them to be maximum size at week 2 of flowering. I expect them to pre-flower in like 7 to 14 days. Until next week!

Overview of my grow: Tent: Secret Jardin DS120 4 x 4 (120 cm by 120 cm) Lights: 2 x 120 Watt CTlite c4 clusterled Climat: Trotec Dehumidifyer 240 watt- 10L/24h Filter: Prima Klima carbon filter PK2600 fan: 2 x Secret Jardin 20watt osc. fan Pots: Gronest 4 x 11 liter airpots Water : automated water system PH: bluelab Nutrients: Plagron cocos A + B Plagron PK 13/14 ATA cal/mag Epsom salt no rights to music in the videos Week 9. I did read it, but somehow i didn't expect her to be this fast, so instead of boosting her a final time, i decided to start to flush allready. Today is day 63 i think this is insain how fast this big sativa looking buds where developed. I'm going to harvest her next week ,She is smelling freaking delicious, the diesel smell is still there but now with some sweet smell and also the lemon as well. I hope she is as tasty as all the smells coming from this wunderfull plant. The buds are a bid foxtailing, like a sativa she is building flower on flower. Thanks for checking 😋

Patiently waiting...

G13 is doing really good under the Medic Grow Mini Sun-2, with the Athena blended line nutrition. I did a solution change a few days back. As I was concerned I was running too strong too soon then. I also added a little blackstrap molasses to solution today. Was about a tablespoon worth I added. The colas are starting to bulk, and I have been doing a selective defoliation when needed. She is drinking a lot, and eating good. I also added a little more pk to solution. So hopefully she takes it good, and bulks the best she can. Thank you Athena, Medic Grow, and Weed Seeds Express. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Girls are really full on flowering!!! They all seem super happy! Been trying to get on a better flushing regiment as it seems to really help around harvest with salt build up using general hydroponics nutrients. I can already see some buildup around the fabric pots. Gonna do a basic pesticide foliar spray with azomax. I don’t see any pests but I’d like to keep it that way esp since I’m flowering now. But everything is going as planned and keeping a watchful eye on them. Oh and also did a little defoliation again...the Maui seems to just keep bushing out while the dosi just wants to stretch!! Super impressed with the genetics and resilience of these 2 strains

I received her as a clone at 21 in. She is now 36 in. She is on week 1 of flower. I am feeding her Sensi Bloom part

D57/FD29 - So, at the last few days of week 4, the SCP had a good push to itself...put on about 6-9" so had to do some bending/leaning of some pretty stiff stems. Unfortunately the only way for them to go was towards the tent walls so drops the light but they're getting WAYYYY over the DLI they should be getting without supplementation of CO2 but its not doing them too much harm. They're drinking a ton but not taking on as much feed (as I've come to expect now in flower) so dropped the base and bloom by 10% (same recommended ratio of 1:1) and kept the PK9/18 booster in there at (what would be recommended) strength for this week...its the same as last week but week 1 (week 4 of flower) of PK9/18 should have been double...didn't want to overdo it as when I used recommended strength 1st time I got it, it created some serious root zone acidification (Which could have been all the K getting used up but was a mare getting the pH up from 4.something every day!!!). Did my usual root flush/wash before adding feed as the EC had crept up to 2.2 (and I know from experience, that starts messing with your numbers if you don't wash that out right) and took about 50L-60L to get the tank to 0.3EC (base is 0.2) was was a lot of salt sitting on/in the roots. Had a ton of underscreen dead leaf to pick up and just cut some wee straggly offshoots (I know, bad idea in flower but they were basically dead/no nutritional value left so basically a bug magnet). Still waiting on Bluelab to send me the RMA approved pH pen...been 2 weeks now since the RMA was approved and still no postage - using an "essentials" pH meter and just dipping in Calibration Fluids between each feed add to ensure some accuracy (As you can see from my recipe page, I like to know what the feed does to the pH - also gives an idea on what they're feeding on when you see pH swings in a different direction that expected). Geekbeast also got back to me. In all fairness, I've been dealing with them direct (Got the light fixture from Alibaba, direct from China - big gamble, right???) and they have been more than helpful. I have been telling them about the light randomly coming on at 5% (lowest brightness) and provided evidence; turns out someone else now noticed the same issue with the Remote App controlled variant and they believed it was a loose control board/wire. They said they did some stuff and that fixed it but I also thought mine was fixed by forcing the dimmer to 0% and it still randomly happened (even though it didn't do it for weeks) so the other person may still get a surprise!! 😋 So, I took out the driver today, pulled out the control board and all wires seemed good and no looseness in the control board (although it does look slightly bent as the Spade for the IR/UV switch isn't fully bedded in). But, like I say, in all fairness to Geeklight, they're posing me a new control board tomorrow from China AND giving me the longer driver cables so as I can put the driver outside of the tent! Give me a bit more room for my Flower Initiator and great to see them honouring the Warranty. Apart from that, wish the SCP would start to set flowers better, they're still looking a bit weak up top but stems appear to be stacking. Hopefully now that last push happened (and hopefully all pushed out!!!!), they will concentrate on buds only...this may be a 10+ week-er - which again, cant really afford as growing tent is drying tent!!! Its supposed to be a 75% indica so would expect bigger/quicker flowering but not showing too many symptoms of being mostly indica...maybe not quite a fully stable genetic line yet?? I dunno but its running slower like a sativa - even with the flower initiator and the late push would maybe imply that too??? Funnily, its tent mate, Red Hot Cookies is 60% sativa and has set flowers quite well so far - showing colour to the tips of the pistils...just wish it would start turning pink!!! Anyway, think that's enough s**te chatted by me!!! Happy growing all!!! 💪

I think she is all set now But I could have waited one more week But I ran out of soil foxfarm ocean forest And some other stuff which makes me Recycle this pot and transplant red poison auto who is right now flowering very fast and good so it is the end for sweet Gelato our first sweet Gelato from sweet seeds Thanks a lot guys for helping me out. Thanks a lot grow diaries for all your support blessings and lets get this girl harvest alright my dudes will be uploading more content soon at the mean time we will be showing you the bud quality against Quantity and hopefully you will see how STRESS this girl was for an auto we know now that they are good for LST and HST better than any other techniques and just some auto like the ones you mix with thai Legendary genetics will grow very fast and recover very good reason why its better to apply fimming to autos that can run fast over recovery because without that gap you Cant use those techniques since the plant wont allow you its genetics are going to get STRESS and wont yield as much as it is supposed to But other than that is the real fact that this lady was under phlizon lights 600W And sadly we found out those are not Full spectrum lights so we are Very eager to join contest and try to win With the support of the whole community So we can continue to grow and show The world ah educational and real Pot smokers team all active in all social networking to point out this is love For all the world back and forth Thanks a lot please join me Please like share Comment Leave your thoughts I do appreciate every single one Hope you guys have a happy growing and happy harvest as well Enjoy SuMMer will come soon Are you ready?

Ending the first week and entering the 2nd week leaving my plants as I'm off to Mary Jane Berlin. I'll be absent for 9 days so I'm facing the challenges how to make sure they'll be okay when I'm back. As you can see I'm saying goodbye from perfect canopy with 9 plants as I've found 3 males that needed to be removed in order to prevent any polination during my absence. I'm eager to see what will happen when I'm back but for now I need to be in Berlin meeting some of you amazing people from the community. Hopefully the remaining 6 are females and they will wait for me in a good state. I'm leaving them in the worst possible moment as they are stretching, showing sex, and weather forecast is extremely hot. This makes my runs unique with all the challenges we are facing each time. Who said growing is stress free? 😂💚

I would like to thank the organizers of the Eternity Grow Cup 2026, Zamnesia and Plagron, for the opportunity to take part in this project. Big thanks as well to everyone who followed my grow diary I really appreciate all the support and interest. It was a great experience to be part of this competition, and I wish all participants the best of luck in the final results. Let’s see who grows the best broccoli! 🥦😄

20/12: Made the 2nd apical cut to the 4 arms to get the 8 colas and a full defolation of low part(i think the defolation was unnecesary but i was very excited hahaha)

Froze one entire plant immedietly upon harvest to turn into live rosin later. Dried other plant for 8 days in grow tent and began curing on 5/19/22.

Another new ac infinity t3 cloud forge came in!! Loving down humidity levels. Added with the rest of the ACI system in running.

They are growing strong and nugs are large enough to need support. They are ganna be getting plan water then next few weeks till they finish up.

😈

As week 5 came to a close and we move into week 6 of flowering, I am having really high hopes for the end result. The buds started to get some light orange hairs which is really nice and they are really starting to thicken up! Towards the end of week 5 the plants started to show early signs of burn on their leaf tips, so I started the week 6 feeding a little early. In week 6 we bring the EC down quite a bit as we get into the late stages of flower. I also recently switch to measuring with EC vs PPM for ease and accuracy. Also at the end of week 5 I did a calibration on my coco for each plant as week 6 nutrients are much lighter. Coco Calibration Method 1. Mix up nutrients. 2. Water plants as normal and measure runoff. 3. If runoff EC is not at or close to the inflow EC a. Water more and keep measuring runoff until the runoff is at or close to the inflow EC 4. Do steps 1-3 for all plants (One at a time) Tips: - I use a shop vacuum that I stick the end in the bottom of the pot saucers and leave it on while I water so it sucks the runoff as soon as it drains out the pots. Then I measure, empty and water again until I hit my targets) For this calibration, I ended up using around 6 gallons of nutrient solution. Watering technique used is to measure runoff at every watering and make sure we are staying as close as possible to the inflow EC. It does not matter how much water you need to put through the pots to get to the desired EC on runoff as that is a benefit of Coco. My main goal is to keep my runoff in check and the plants seem to do better than I have ever grown before! The smell off these ladies are amazing and strong. I don't have a carbon filter and enjoy her smells and aromas all day long as my desk is right next to my tent. There were no issues in Week 5. Plants continue to look amazing and the buds are continuing to bud up and structure very nice! I'm excited to see the end result after the ripening and flush stages. Also the colors that are soon to come! Stay tuned! ______________ We are 5 days into week 6 and the buds continue to grow fatter and fatter on a daily basis. I'm really dialing in my EC and making sure to mix it at 1.1 EC and making sure my runoff is from 1.1-1.4. I started playing with the mix as I am getting used to the grow schedule and how the base nutrients effect the EC. I have found that doing 50% of the low strength calendar hits me right at my target EC and I don't have to dilute my mixture after. The smells continue to be strong and fill my house up. The weight is starting to make the colas lean over which is nice because it's opening up the canopy to get more light in. I'm very excited to see what the buds look like in week 7 and then we are on to ripening stage, flush, and then finally harvest!!

,🍇