Likes
Comments
Share
I had a lot of fun with this strain and it was grown against 400 growers so let me say PHENO hunting is a true thing. Overall the Bud was a nice dense structure and the smoke on it was smooth and the high nice and even.
Likes
29
Share
( IVE SWAPPED OUT RHIZ FOR REGENAROOT ) Will flower when have room lol Feed Started With Tap Water Left Overnight For Chlorine/Chlorides To Evaporate. Next Day. Starting EC of our water is 0.15. I added 1ML of Regenaroot Per Litre. Then Used Canna Terra Vega Until EC measured 0.7. I then used the mighty growth enhancer drop by drop until my EC measured 1.1 Finally i PH'd the mix to 6.2. Made sure the feed was of adequate temp and continued to feed.
Likes
17
Share
@BB_US
Follow
These ladies are solid and filled with tons of orange hairs. The smell is like no other of citrus and fresh cut wood. One week then I am going to flush her.
Likes
6
Share
Likes
36
Share
@Salokin
Follow
She continues to develop nicely. Unfortunately I managed to break two more branches, from both she recovered instantly and the branches started to heal already. (Need to be a bit more careful going forwards). The quick healing I would either account to the genetics, but would also contribute it to the rizothonic from canna, as her root system is also a lot further than the plants I grew before. She already smells super strong, can bare keep the tent open for long.
Likes
5
Share
Still only feeding water, I put them into 4ltr pots so they won't want food for a few weeks, flipped to 12/12 on day 35
Likes
23
Share
Small update Everything is going pretty well, nothing has really changed accept size. Still feeding through the autopot system. Nutrients have been upped slightly to 3ml per litre I think they are ready to flip over now but not sure wether to put them into a scrog for another week. They are pretty low and bushy on there own but I’m not sure if they would benefit from a lot of defoliation and lollipopping as the plants aren’t very tall anyway.
Likes
14
Share
Enjoyed this run. Ready to harvest in about 1 and a half weeks, I actually have seeds in a couple of the plants. It happens, this is my first indoor grow so, need to get my hand on some new genetics
Likes
8
Share
@Oldwied
Follow
Day 58 The colours of autum are so beautiful. 1 week left to haverst.
Likes
66
Share
Well, it's finally time for an update, right? And for a newbie like me this week has been quite eventful! 😲 After last week's "Helmet Head" (which I suppose was my fault for not burying the seed deep enough 😱) her leaves started to look twisty, Honestly don't know why that happened but my three hypothesis are: because that's just the way she is, because I didn't properly bury the seed or I made a mistake somewhere else. However I also think she looks pretty and this makes her look quite "special" 👍. In her 6-7th day after sprouting I noticed her leaves started to look even more twisty and she was about to outgrow her cup. I worried and decided that it was the right moment to transplant her. At first I didn't know "how" to do it and all I knew is that I could shock her if I did it wrong (which worried me haha 😨). None of the sites I checked really specified any kind of information regarding how I should prepare the medium for the new plant (just some vague information here and there) so I came with the idea to just water it bit and then "massage" the soil to avoid making it "lumpy" and I feel it did work out well in the end! I feel I didn't shock her much and in her second day she was growing even more as well! Nice! 😍 Next week I'll start feeding Puff with some nutrients but the PPM of the tap water where I live is somewhat high (around 600) and it's electroconductivity is around 1200 us/cm but a lot of growers in here still use it (they just wait for chlorine to evaporate) so I'll try doing the same. I'll use half dose of Biobizz Bio Grow and half dose of another product called Gold Sunshine from Quemanta (which is Cal-Mag with some amino acids) and see how things develop! 😃 I'll try to see if I can make my DSLR take the photos for future timelapses, because my webcam sucks for that job! Thanks everyone for reading 😉
Likes
16
Share
@Mrg7667
Follow
Still see nitrogen toxicity so im going cut biogrow down to half dose and see how it goes! Besides that all looks well Smells are stepping it up in a couple pheno! On the Chocolate Marshmallow side we have a intense sour fruity pebbles on a pheno that is just unreal And on the double d side we have some rotten tooth chem smells coming through!
Likes
92
Share
Week 7 Veg Report 🌿✨ Hey Grow Fam! 🌱 Week 7 of veg is here, and let me tell you, the grow room is buzzing with life! Each of the girls is showing off her unique personality, and I’m especially stoked about the Papaya Zoap—she’s really coming into her own! The scrog net is nearly filled out just how I wanted it, and I can feel we’re so close to flipping to flower. The anticipation is real! 😁 But before we get to flowering, let’s take a dive into something that makes this grow so smooth—ThinkGrow LED drivers and cables. ThinkGrow LED Drivers – Plugging Into Success 💡🔗 This week, I had a chance to work deeper with the ThinkGrow LED system, and honestly, it’s like a dream come true for efficiency. I’ve been using the TLD-4 Four Spectrum Control Channels Model One LED Driver, and let me break down how it works. The drivers attach directly to the bars—super sleek and no extra bulk. And, the connections? It’s a matter of matching the male and female connectors on the TDC-2 Daisy Chain Cord. It’s like a simple puzzle that snaps together perfectly. The TDC-4 cord takes it to the next level, connecting the top bars to the ICL-300 Inner-Canopy LED Bar, giving complete control and balance across every layer of my canopy. Why is this important? The driver-to-bar connection ensures that each LED bar is operating optimally, and the daisy-chain system makes it effortless to manage multiple bars without a ton of wires everywhere. It’s neat, efficient, and delivers even light distribution, which my plants are loving! 🌞 Are My Girls Ready for Flower? 🌸 When I look at the plants up close, it’s like they’re whispering, “Flip me to flower already!” 😆 Their growth has been so vigorous, each filling out the space with character, and that scrog net is almost fully covered. So, I’m thinking we’re super close to the big switch. Each plant has its own pace, but as a whole, the grow is looking fantastic! Room Stats – Tuning Into the Environment 🌡️ The TrolMaster system is still killing it with data and control, making it easier for me to keep everything balanced. Here’s a quick breakdown of the week’s environmental numbers, and a few jokes along the way! 😜 • Room Temps: Max 25.5°C | Min 24.4°C (Keeping it cool but not too chill!) • RH: Max 76.4% | Min 67.1% (Humidity stays right where it needs to be.) • CO2: Max 832 ppm | Min 420 ppm (Shout out to that magical 420! 🌬️😂) • VPD: Max 1.06 kPa | Min 0.64 kPa (All dialed in for peak veg mode.) Light Levels – All in the Details 💡 • Max PPFD: 506 | Min 0 (because, you know, when the lights are off, it’s dark! 🌚😆) Keeping the light intensity balanced, and using the ThinkGrow LED system to spread that goodness across the entire canopy, I’m seeing explosive growth. Those PPFD levels are perfect for this stage! Water & Nutrients – The Lifeline 💧 • Solution pH: Max 6.32 | Min 5.78 (Keeping it in the perfect range.) • TDS: 355 ppm steady (Every drop counts, right?) • Solution Temp: Max 23.5°C | Min 22.3°C (Keeping things cool, just like the grow!) And medium moisture? It’s a solid 100% thanks to my AutoPots and the genius of the AquaValve system. No electricity needed—just gravity doing its magic. It makes my life so much easier, and the girls are loving the consistent hydration! No more worrying about under- or over-watering. Why I’m Obsessed with TrolMaster 📱 I can’t talk about this grow without shouting out the TrolMaster system. Every bit of data—whether it’s temperature, RH, VPD, CO2, light intensity, or pH—gets tracked and displayed in real-time on my app. It’s like having a grow assistant in my pocket, making sure I can monitor and adjust at any moment. The level of control I get with TrolMaster is out of this world, and it’s helping me keep everything dialed in perfectly. Ready to Flip Soon 🌸 With the Papaya Zoap filling out so nicely and the rest of the plants following suit, I feel like we’re right on the edge of flipping to flower. It’s going to be a smooth transition, and I can’t wait to see these beauties bloom! Stay tuned for next week, where we might just make that flip! 😉 Environment Stats Recap 📊 • Room Temp: Max 25.5°C | Min 24.4°C • RH: Max 76.4% | Min 67.1% • CO2: Max 832 ppm | Min 420 ppm (Seriously, shoutout to 420 again! 😂) • VPD: Max 1.06 kPa | Min 0.64 kPa • Light PPFD: Max 506 | Min 0 (obviously, when the lights are off! 😜) • Solution pH: Max 6.32 | Min 5.78 • Solution Temp: Max 23.5°C | Min 22.3°C • Medium TDS: Max 430 | Min 420 (I can’t get enough of these 420 jokes! 😆) Final Thoughts 💚 This week has been a blast! Between the ThinkGrow LED system and the TrolMaster gear, I feel like I’m pushing the limits of what’s possible in indoor horticulture. Everything is dialed in, the plants are healthy, and the data just keeps showing that we’re right on track. Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
12
Share
She was the smallest of the 4 but weighed in at 2nd place. All in all I would grow again. Great weed. 9/10 from me
Likes
25
Share
Finally harvest day has finished 😍👌 After 5 days of drying and investing many hours for trimming, is everything ready for the curing process. It already got a very delicious smell 😍🤤 Can‘t believe that i got around 470g dry from 3 plants
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 56 Took some glamor pics with black background - not really for vanity (although there's a little) but for contrast. I see more of the lockout issue better in the pics this way. - on that note, the ph seems to be working as it's been two days since defoliation and knitting needle ph correction, and the progression is way slower than it was on the last leaves at 3rd day of identifying. So with that, room VPD of 1.07kpa seems stable enough with temps about 76F/65%RH/33%ILV I released the binds today to let her grow without them until they crowd each other too much and I need to restrain - so in a couple of days at max. Day 62 Transfer day. Although at first I didnt think I would be able to until Saturday, I got pots and plant saucers today, so I ended up going ahead and doing it. Started by calibrating/testing both meters. Double checked the soil mix from yesterday as the last time I used wood ash the ph rose the day after... however this time it was fully mixed to I wanted to know if there would be a higher ph - it was the same as yesterady - 5 reading avg of about 6.35 - the slurry of 1:1 soil and 7.7 ph water was tested at 6.3 also. Made about .75 gallon of 75/25 veg/bloom juice water at 500ppm feed water. Tried to ph read the soil in the pot and seen it go from 6.6 down to 6.35 (took video) in the dry soil, so I decided to use the 6.35 new soil reading and ph balanced the feed to that. Used the needles since it was 7 days since the last feed and I am using such a small amount. Poured over needles in 8 places and pulled each out to let water down. the vacuum pulls the water down when I lift the needles. Then I mixed 5tsp of Dynomyco to the 5 gallons of new soil and mixed really good. I placed a layer of perlite on the bottom of the 10 gallon pot and then layered in some soil. Then with the help of my wife we pulled the plant out of the pot and placed it in the 10 gallon. I place back in the tent and added about a quart of plain de-chlorinated water evenly over the new and older soil to help bind them. I reduced lights by 100ppfd to have about 505 and 500 at center colas and 430 lowest on outer ring with most at 450 and 470 highest. Soil to light is 35 inches and the plant is about 14 inches so about 21 inches from leaves to lights. I left the ring off today and will rebind as needed tomorrow after she rests. Today the leaves look wilted and limp. Also reduced humidity to 60% so 58 to 65% should be the range and the temps are 73F with the lights lower. PPFD was higher with the new growth - unbound and tucked in for better cola/light position, it reads 570 to 580 on outer colas and 590 at both center branches Day 57 Getting 1 more day out of free range growth before I tie her back against a ring. So in that time I decided to take a few vanity pics. Overall the ph block seems to have slowed or stopped and she's back to growing again. Will be thinking about flip at the end of this week or so. VPD same stats 76F/65%RH/33%ILV - ppfd right at max so I'll likely tie her off tomorrow. 605 600 in center and 580 to 590 at the outer ring. Day 58 VPD stats mostly steady again today - 76F/65%RH/33%ILV - ppfd was checked after LST, measured 600 at each center cola and the outer ring measured between 550 and 590 most at 580 So as I said, I did LST today to bind her more out while the 4 center 4 colas fill the middle. I had to bind to the pot base instead of the ring as the colas are still a little short to reach for binds at the ring just yet. There's a lot of space to fill and a few (about half) of the out colas are sideways for now. Had a break at the center cola when I tried to pull it back for bind. I knew to hold the branch at the node but forgot to do it here and heard a "snap" ... taped the crack and moved on - will monitor obviously Day 59 Did more light LST to ensure the branches are growing where I want. PPFD was mostly the same as yesterday only now there are more colas around 560 than 580 on the outer ring with the center colas at 610 and 590 (front cola was tied down to spread more away from the ring and fill center better. vpd same as past week or so 76F/65%RH/33%ILV Last feed was on day 54 and the soil still seems damp so I will check again tomorrow for the next day. (Day 61) The broken branch doesnt seem to have affected either side of the split as both sides seem to have grown a little with little to no wilt or drooping leaves. Im hoping it heals okay and doesnt delay flip to recover more; still monitoring. Day 60 Did some light LST today by releasing the lower binds to the pot and attached as couple to the outer ring now. So far I only have to bind a few as most are already holding where i want them to. Took the tape off the split and seen I didnt seel the gap closed when I taped it so now Im considering a drop of super glue to bind the branch back in hopes it grows onto the other side again. If not at least it would be more secure than it is now. And since it's a main split for 4 colas, I dont want too restrict it by binding at the split and potentially cutting off the nutrient pathways. ppfd after LST was 610 and 600 after more LST and the outer ring is still ranging 550 to 580 with more at 560 now. VPD same as I havent messing with any of the variables. 76F/65%RH/33%ILV Soil is a bit dry and it's been 5 days since the last feed flush, so I have about 3 gallons of tap burning of chlorine now for a feed tomorrow morning. Might still update again later if I find superglue... found some superglue - tried to take pictures but I cant hold, squeeze the applicator, and film with just two hands. So the idea gets through, I did both sides. On a side note I discovered a root popping out of the soil from the top. Covered it up but wasn't sure if I should be concerned. Day 61 VPD same as it's been for most of the last week - 74F/65%RH/33%ILV PPFD was recorded after I turn the plant a quarter turn for the smaller colas struggling to get over he ring's edge to have more light. Most colas at 580 with a couple at 600 and a couple more at 550 - center colas are hitting 615 and 620, but I have plancs to reduce in the next couple of days now On that note, the root growing out of the top tells me that she's hungry and needs more root space, even if that means growing through the top of the soil. So I plan to transplant to a 10 gallon and flip after the recovery. After reviewing more of NugBucket's journal I realized this is why he moves them when growing 16 colas. New pots should be here Friday so I should be able do it on Saturday. So I prepped soil (using more Happy frog with mycorrhizal fungi already growing in it for a few weeks) with de-chlorinated tap water Started by ph testing the soil and the water (4 readings on soil at 5.03 avg) - added about 1/2 cup total of wood ash to bring up the ph , mixed and tested again - added water at (about 7.7 ph) and tested again... last 5 readings in soil was 6.24,6.3,6.35,6.37,6.38 avg of 6.328 - covered and let rest until needed. Since I plan to transplant in a few days I felt it would be best to 'lightly' feed tomorrow, again on transplant day, and again 2 to 3 days later. Since my wife was taking pics at this time, I could only find this one to show the roots growing into the perlite then we planted it in the bigger pot. -------- (Day 62 root base picture from above) I have a hypothesis that says these are so short because I intentionally tried not to move the plant without the base stand to keep it from grinding these up and allowed them to grow in the last 2 weeks. This is that test picture/results. I like the idea of better/more drainage, but thinking I am doing more harm each time I hear those gravel pieces crunch as it cuts those and forces the plant to look somewhere else for root space. Notice how the small root lines have no finer pieces or laterals grow out from these - I believe that is because they are so new in growth and that the perlite chewed up the smaller laterals even with little to no movement over the last two weeks I would like to see a root ball experiment that exposed the roots throughout the grow but for now I can see these roots do grow into the base perlite and need to be handled carefully if you want them to grow more freely or with a standard pot size. As you can see Im not root bound but my plant thinks it is and is growing roots out the top.
Likes
26
Share
Day 8 08/07/24 Monday Light water with De-chlorinated tap pH 6.2 with half t spoon of DyNoMyCo. They seem to be loving it!! Germination week complete, Let's start the VEG 🤩 Updated short videos of strains ,✌️💚
Likes
101
Share
@FoTwenny
Follow
Fo' Twenny Back with another update on our "GelatO.G" from Seedsman Seeds! 8/24: I did some selective defoliation to help increase light penetration. Next watering will be a flush with 2 tsp/gal of Fox Farm's flush agent SledgeHammer. A flush is recommended after week 3 in the Fox Farm Feeding chart. I figure the recommended flush will do some good considering I have a lot of coco in the mix and there are small amounts of salt fertilizer in my schedule. Everything is growing strong with this lady and she has an abundance of growing shoots. She is stretching nicely with good internodal spacing. She responded well to training and is growing perfectly without too much crowding. The leaves all look very healthy and are a nice shade of green. Based on her look and color now, I am guessing she should get some really nice colors as she fades towards the end of flower. 8/28: Flushed the medium with tap H2O run through 2 KDF filters with 2 tsp/gal of Fox Farm Sledgehammer flushing agent and pH adjusted to 6.2. I started by giving 5 gallons. After checking the PPM of the runoff I ended up adding 5 more gallons mixed to same specifications. 10 gallons total was shared by 3 large flowering photoperiod cultivars and 1 smaller autoflower. She probably ended up with about 3 gallons give or take. I didn't measure how much each plant received. I just kept flushing each and checking runoff until it was under 1600 ppm. Thanks for checking out my diary. If you liked this diary, check out my other diaries and give me a follow! Until next time... Peace ☮️, Love 💚, And Frosty Nugs ❄️🌲! -Fo'Twenny