Probably switching to flushing nutes this week. I'm on trichome watch.

Cogiendo raíz y rompiendo la pipa todas

Some deficiencies due to PH levels too high. Replaced with new PH pen.. Waiting on recovery, should notice difference by the end of the week.. Going to week 12.😓🎋

Progress: starting to harvest. Update 10/9, we’re in the amber zone and will cut it all by 10/11. Marathon OG; 1 plant. Started harvesting earlier in the week, gradually taking down mature or at risk colas. The plant is probably going to be my best this year. Yield so far; I harvested 75%: fresh froze 2gal and cured 9oz. Theres another 4 oz still on the plant. 75% good to high quality dense and resin packed buds. This yield is for a 20 gallon plant. Lava cake: 4 plants (3-15 gallon 1-5 gallon). The main colas were mature with some amber. The sex pods were rotting on some so I took them down first to prevent any bud rot. Colas were mature (mostly mains) with hard dense buds. I took 30% and left about 70% still growing. I froze 4 gallons and harvested about a pound or so, hard to say yet as it’s just starting to dry. PPP is still waiting to be harvested. Funky looking purple bud stacks. Still some clear trichomes, mostly milky. Cant wait to try it. I ran some bubble hash: I ran some fresh frozen marathon OG as well as a pound from last years harvest. Bubble Hash Yield; < 2 0z 3g rosin quality A+quality (use a rig!) 10g high quality (dark rosin hash) A- quality 38g hash C quality (smoke in joints, like OG hash, but cleaner.) 10g low grade d/e quality (edibles or press for rosin) The fresh frozen produced the high quality rosin, but at a lower yield. The dried and cured pound from last years harvest produced so much ( an ounce and a half) it clogged up my micron bags. It’s good hash, but nothing like the fresh frozen rosin like hash. It’s gonna be a busy week of feeding, scoping, harvesting, drying, curing and trimming. The lava and the OG smoke great. The marathon og is so far my favorite to smoke. I have not tasted the purple push pops yet…..

Hello, Hello! This week has been another pretty solid week. Kind of continuing where we left off from last week. Just continuing to monitor the grow room conditions and make adjustments as need, though its been super solid and not a lot has been needed. I did lower the power of my light back down to 50%, some of my leaves were starting to taco and I came to the conclusion it was due to some of the branches being closer to the lights, but other than that no real issues. I did up the EC by .1 this week so now we are running at 1.0 EC and 5.9-6.1ph. These ladies are really starting to pack on the weight and trichomes this week and looking forward to see the changes over the next week or so! Temps have been pretty stable around 77-78f and around 50-55RH. I did do another round of light defoliation on the day of water change, but nothing too crazy. Getting excited to see these girls finish! As always, any tips, comments, or recommendations are greatly welcomed and appreciated. Thanks everyone, you guys rock!

here we are Guys, 11th week, 6th into flower, the girl is recovering nicely. she started to put some size buds and pistils are started back to grow white. the Led is working perfectly and the buds are really frosty as fuck. I hope she will still give me some nice weight even with the past big mistake. UPDATE: she's definitely recovering fast. at day 82 the buds are swelling, I apologise for all the colors shades but i changed lights in order to get the best shots.

This week started out well. After topping both sides started growing pretty quickly. Later on in the week I decided to see how flexible the new branches were, they seemed pretty flexible so I wanted to start fixing them down, but not too low. Sadly one of the branches snapped off. I quickly tried to reattach it, but it got loose and died off. New plan, I left the second node intact to fill up some possibly empty spaces, but now they will have to serve as the right side of the manifold. Part of the timelapse is a bit weird as the camera kept sliding out of position because of the wire pulling it down, but that should be fixed now.

The 4. Week of Flowering begins... Watering: ca every 3. day 1.5l per plant : - - -> Feed - Feed - Water only (ph 6.3) - Feed - Feed - Water only (ph 6.3) - Feed - ...

This girl is so beautiful and the under canopy has these lower colas looking like the top colas last update on this beautiful girl gonna harvest her in 2 to 3 days give her a final flush and let dry up she has soapy citrus smell to her nice thick trichome coverage amber is coming in nicely can't wait to get tested after harvest nice thick bracts stacked really nicely not much foliage on this girl which is super nice was hoping to have this done by now but lower temps made her grow a little slower but brought out so pretty purple tips can't believe the first round froze in the veg stage when my heater went out but looks like she's gonna finish in time gonna give her a nice 10 day hang maybe less depends how she dries so here's to another harvest

(11/06/20)Dia 36.- Actualizacion correspondiente a la semana 6 de Cultivo. Hasta el momento se ha dedicado principal atencion al tejido en la red Scrog. El día 11/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [1,5mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C] PH 6.1 / EC= 1.29 Tº=2 X1 Semilla Auto Tutankhamon= 1L [1,5mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C] PH 6.1 / EC= 1.29 Tº=2 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 550 ml [1,5mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C] PH 6.1 / EC= 1.29 Tº=22 El día 14/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [1mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C+2mLAutoTop] PH 6.4 / EC= 1.49 Tº=22 X1 Semilla Auto Tutankhamon= 1L [1mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C+2mLAutoTop] PH 6.4 / EC= 1.49 Tº=22 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 550 ml [1mlKnactive+3ml/L ATAGrowth-C+5mL ATAFlower-C+2mLAutoTop] PH 6.4 / EC= 1.49 Tº=22 El día 17/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [0.5MlBLOMBASTIC+0,5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.56 Tº=23 X1 Semilla Auto Tutankhamon= 1L [0.5MlBLOMBASTIC+0,5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.56 Tº=23 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 700 ml [0.5MlBLOMBASTIC+0,5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.56 Tº=23

Alle schriftlichen und visuellen Materialien sind nur für Informations- und Bildungszwecke bestimmt !!! 13.3.23 verschüttetes sauberes Wasser 150 (ppm) hervorragende Entwicklung im Moment Red Hot Cookies Feminisiert - Sweet Seeds Red Hot Cookies von Sweet Seeds ist ein feminisierter Marihuanasamen, der aus ausgewählten Tropicana-Keksen und einem Tangie gewonnen wird. Das Ergebnis ist eine atemberaubende Cannabis-Sorte, die für ihre spektakulären roten Blüten mit hohem THC-Gehalt und köstlichen Aromen bekannt ist. Red Hot Cookies ist eine wirklich produktive und harzige Pflanze mit einem wunderschönen exotischen Aussehen. Sie blüht in 8 Wochen und in 60% der Fälle entwickelt sie wunderschöne rote Blüten, die mit Harz überzogen sind. Red Hot Cookies präsentieren tiefe Aromen und Geschmacksrichtungen mit überwiegend süßen, zitronigen und fruchtigen Tönen. Sie erzeugt aufgrund ihres hohen THC-Spiegels einen starken zerebralen Effekt, ohne jedoch völlig narkotisch zu sein. Das mentale Hoch nimmt langsam ab und wird körperlich entspannender. 10.3.23 this week I decided to install a large tent Mars Hydro 120•120, for one and a lamp with a large coverage FC E4800. I set up the climate control, now the temperature is around 24, I installed two fans to blow the Secret Jardin monkey fan 20w, I wanted to buy them for a long time. The heater also works! Hope it warms up soon 😅

Day 43 : I don't have more Bio-Heaven (get only a sample in the grow shop) so she will only get the 3 others for the moment.

My first time making alcohol tintcure Using the c1 , Hold on tight gonna be a trip

Finally harvest day has finished 😍👌 After 5 days of drying and investing many hours for trimming, is everything ready for the curing process. It already got a very delicious smell 😍🤤 Can‘t believe that i got around 470g dry from 3 plants

Cambio de foto periodo inicia la flora hay pistilos!!

**Encontrarás la traducción a español al final de la descripción** From/Desde: 09/09/19 || To/Hasta: 15/09/19 From day/Desde día: 08 || To day/Hasta día: 14 Blueberry Cookies Diary / Diario de las BlueBerry Cookies: https://growdiaries.com/diaries/38769-dinafem-039-s-blueberry-cookies-at-the-ocean -----IMAGES & VIDEOS----- V1 - Transplanting day. I'm using 10 l Aeropots as final recipient. I've used: - Small layer of ATAMI HydroRokz (perlite) at the bottom of the pot, just for cover bottom holes and to retain a bit of humidity - Over the perlite i placed 1l of mixture with BioBizz "All Mix" and Volcanic Soil - Again over, 1l of mixture with BioBizz "Light Mix" + Volcanic Soil & Guano - And filled the rest with BioBizz "Light Mix" + Volcanic Soil It's the second time that i broke half of the roots of a plant doing a transplant, It happened to me just for not being careful enough to hold the soil by the lower part. While this is no good, no further signs of that mistake other than the recorded video ;). V2 - Quick show up on how to correct the color of photos taken under red/ping/purple light. First I merge the HDR image from 3 bracketed shots, then I apply my custom color adjustment in the HDR resulting image. As i show in the video, to correct the red light, you have to enhance the blue and green curves, just play with a point in the curves until you find the best adjustment for each of both curves. Then you should go to tones, and play a bit with reds, pinks & purples... and.... Voilá, you can see the results, easy and effective..... but no more easy than using the right white spectrum. P1 - Cookies Showdown before transplant P7 - Volcanic soil and Guano -----WEEK SUMMARY----- This week was very easy, i didn't do anything to these babies apart from the transplant. This is the first time im mixing something with the soil, I hope not to overfeed the Cookies with the nutes, as i'm going to use the same nutrients i was using. The first 10 days they were growing in my 60x60x40 tent (DP60), with a terrible chinese light that i always use the first week wen I plant. PandaGrow 100W (50W draw) - http://www.pdgrow.com/index.php?m=Show&a=index&cid=12&id=53 So after transplanting when i place the plans under the Quantum Board or the Platinum LED, i've notice it on them immediately, they really don't like this kind of chinese lights. Thus after the transplant the plants has started to grow and wide much more and much quickly. -----WATERING CALENDAR----- 12/09/19 DAY 11 - 1,5 l after transplant with all week nutrients @ 0.8 EC & PH5.8 *****ESPAÑOL***** -----IMÁGENES & VÍDEOS----- V1 - Día de transplante. Transplantaré a AeroPots de 10 l. Para el transplante he usado: - Una capa pequeña de ATAMI HydroRokz (perlita) en el fondo de los tiestos, sólo para cubrir los agujeros y retener un pelín de humedad. - Encima de la perlita he puesto 1 l de mezcla de BioBizz "All-Mix" con tierra volcánica - De nuevo encima he puesto otro litro de mezcla de BioBizz "Light-Mix" con guano y tierra volcánica - El resto está relleno con una mezcla de BioBizz "Light-Mix" con tierra volcánica Es la segunda vez que se me parter unas raíces por la mitad en un transplante, eso me pasa por no ser lo suficientemente cuidadoso como para agarrar el sustrato por su parte baja. Esto no es algo bueno, pero he de admitir que aparte del mal rato de que se te partan las raíces, a la planta no le sucede nada de nada, sigue creciendo al mismo ritmo que su hermana. V2 - Un ejemplo rápido de como corregir la iluminación de una foto tomada bajo un espectro rosado o rojizo En el vídeo primero compilo el HDR compuesto de 3 fotografías horquilladas y una vez compilado le aplico mi ajuste de color. Como muestro en el vídeo, para corregir este tipo de luces hay que realzar las curvas de color azul y verde, simplemente con un punto por encima de la mitad de la línea media hasta encontrar los puntos más adecuados para tu luz. una vez encontrados, sólo hay que ir a los tonos y ajustar un poquito el rojo, rosa y morado. P1 - Muestra de las Cookies antes del transplante P7 - Tierra volcánica y Guano -----SUMARIO SEMANAL----- Esta semana ha sido muy sencilla, no les he hecho absolutamente nada a las pequeñas a parte del transplante. Esta es la primera vez que mezclo algo con el sustrato y espero no sobrealimentar las cookies ya que voy a seguir usando los mismos nutrientes que he usado con anterioridad y de la misma manera. Los primeros 10 días han crecido en mi tienda de 60x60x40 (DP60), con una luz china terrible: PandaGrow 100W (50W draw) - http://www.pdgrow.com/index.php?m=Show&a=index&cid=12&id=53 Siempre uso esa luz los primeros días de cada cultivo, por lo que al cambiarlas a la Quantum o al Platinum LED lo noto al toque, realmente no les gusta nada la luz china esa, inmediatamente se ponen a crecer y ensanchar mucho mas. -----CALENDARIO DE RIEGO----- 12/09/19 DÍA 11 - 1,5 l después del transplante con todos los nutrientes semanales @ 0.8 EC & PH5.8

Tag 29: Die 5te Woche ist gestartet, ich habe neue Triebe runter gebunden und vorhandene Drähte neu gesetzt. Beim nächsten gießen werde ich Green House Feeding Bio Bloom in die Erde geben um die Blüte vorzubereiten. Sollte ich die Blätter die entweder einen CalMag Mangel oder einen Düngebrand hatten entfernen? Tag 30: LST wieder einige Triebe runter gebunden und die alten Drähte neu gesetzt. Tag 31: Heute habe ich allen Pflanzen ca. 5g/L Topfvolumen Green House Feeding Bio Bloom als Topdressing gegeben und anschließend mit PH 6.5 Wasser gegossen, erst 700ml pro Pflanze mit einem Pumpsprüher und Nebeldüse, ca. 30 Minuten später 1L Wasser langsam mit einer kleinen Gießkanne und als letztes 2 Std später nochmal 1L Wasser mit einer kleinen Gießkanne. Mit dem Dünger habe ich schonmal Vorbereitungen für die Blütephase, welche ich Ende dieser Woche einleite getroffen. Ich denke ich werde diese Woche noch einmal gießen müssen wo ich wieder CalMag in das Wasser mische. Tag 32: Heute über eine Stunde LST betrieben und versucht alle Pflanzen ungefähr auf eine Höhe zu bekommen. Tag 33: Wieder fast alles Drähte und Clips neu gesetzt die Pflanzen geben gut Gas, Zelt sauber gemacht, Flexitray reingelegt und alle Töpfe auf Gitter Untersetzer gestellt. 2 Tage noch dann Wechsel ich in die Blütephase. Tag 34: Alle Pflanzen nach meinem Gießschema 15% vom Topfvolumen also mit 2,7 L NL gegossen, Wasser PH 6,5, 1g/L Green House Feeding Bio Enhancer, 0,8ml/L BioBizz CalMag. 700 ml NL mit Drucksprüher und Nebeldüse die Erde angefeuchtet, 30 min. Wartezeit dann 1 L NL mit Gießkanne in kleinen abständen gegossen und zuletzt nach ca. 1:30 Stunden nochmal 1L NL langsam mit einer Gießkanne gegossen. Tag 35: Der letzte Tag der Vegetativen Wachstumsphase, alle Pflanzen kontrolliert und durch LST für mehr Licht gesorgt, ab morgen stelle ich auf Blütephase um, mein Fazit für diese Woche, eigentlich lief alles ganz gut obwohl einige Pflanzen leichte Mängel aufgewiesen haben. Ich hoffe durch die Zugabe von CalMag und Green House Feeding Bio Bloom reguliert sich alles. Trotzdem bin ich ganz froh wie mein erster Grow bisher verlaufen ist.

Heavy buds 😁 love this strain. Verry nice buds comming 🤩✌️🏼