Hey everybody, hope all is well👊. It's been a good week, all plants are growing extremely well. Pulled Sour girl #2 out of the box and got 21 grams(dry) of small popcorn buds and 98 grams(dry) of nice sized nuggets, SUPER HAPPY😋. Harvested Sour Girl #1 yesterday, this plant turned into a monster, it was almost 40 inches tall and right around 36 inches wide💪. I never got real big buds from this plant,but I got lots of med. sized nuggets👍. I put 77 grams of popcorn buds and 460 grams of nuggets into the tent to dry.👍 Will report on smoke and taste as soon as #1 is dry, right around 7-9 days. As for the Amesia auto, I've had it growing in the gorilla tent under the new light(xs2000), just letting it do it's thing, no topping or lst, 0 defoe and 0 food for the first 3 weeks. For the flowering cycle I fed molasses and great white,humates and bloom from Dutch Sciences, that's it.. Super easy to grow and the buds are HUGE, harvested today and I got my biggest bud so far, Main Cola 100 grams wet, HOLY SMOKES😍, couldn't believe it when I put that on the scale😶. Remember, It's 420 Somewhere

6/27/21 - I’m just feeding and letting the plants flower. So far so good! For a first time grow I think I did pretty well but it’s not over yet ;) 6/28/21 - They look great! I bumped up Cha Ching to run until final flush. Hopefully that will help make it a little more frosty. They are sticky to the touch and smell great. 6/29/21 - Some branches fell over from the weight of the bud. I had to tie them up to the light. See the bottom of the plant in the pic above. :) 6/30/21 - Most of the plants keep falling over. I have to tie them up with string to the light. Buds look great! 7/1/21 - More of the plant fell over but I tied everything up so it’ll be supported. I shouldn’t have to tie anymore branches. 7/2/21 - They look good! Lots of buds. More than I initially thought. Oh well, looks good! 7/3/21 - Day 42 of flower. Getting very close to start a flush. I’ll use sledgehammer a couple times then water from there on out. They look on track! I haven’t had any deficiencies or any discoloration. No pests either.

Well, this is not an auto that is for sure... I have her on 12 on 12 off and that has sugar flower.. hopefully, everything works out considering how small the pot is.I don't think she was ever meant to get this big.. But i've also had pretty big plants in one gallon containers.. everybody on here uses five gallon seven gallon.Some even ten gallon... Dirt to weed ratio, if I use the ten gallon theoretically, I should be able to grow atleast at 4 pound plant 🤣 as I average a quarter pound per one gallon .. anyway, I don't know what's going on with this. I'm hoping it's purple haze.. i'm hoping it didn't get swapped around.Somehow with some bs strain . Time will tell .. hope all is well... God bless and happy growing everyone ✌️

Day 82 Getting to the end ,maybe 2 weeks 3 max to chop, fattening up nicely, drinking as normal now smells really nice (not sure if it's strong as I'm a bit to nose blind ) to her usual sent 🤣 , will swap nuits again for last week or 2 to a 1 part simple no N finisher , I don't think I'll bother to flush ,will see 😅

Beginning of week.. Wow.. Just... Wow lol.. That's all I can say. Amazing scent.. Gorgeous colors.. Very happy and healthy girl. Besides very minor spotting on some lower leaves.. Which I am assuming was from Calcium def.. She is looking great! I'm not sure what this is all about, but damnnear all my plants have this clawing on leaves that are not exposed to the light.. Looks like wind burn.. Looks like nitrogen toxicity.. But I know for a fact that its neither.. Fans are not even really blowing on the plant itself.. And other leaves would also be clawing if it were nitrogen toxicity.. I'm assuming it's just from not enough light exposure.. But not an issue.. She is happy and loving life! At this point I am stopping silica.. Just too many conflicting articles about it not doing any good in flower.. And even causing the smoke to be harsh and the bud hard to break up.. Which does make alot of sense.. I only like to use silica in veg anyways.. And for the stretch.. It just makes more sense to me.. Mid week.. Adjustments need to be made.. The very top of each cola is getting a little bit of clawing.. I'm thinking it may be time to cut back on some Micro.. Maybe even the Floralicious Plus, since they both have so much Nitrogen in them.. She's getting plenty of CalMag, and the other trace elements in the Micro shouldn't be that much of an issue.. Still gonna use the Micro.. Just cut it down from 1mL/L to .5mL/L. Maybe the clawing is just how these plants tend to grow?? I'm not sure.. I see alot of the clawing on her small side branches.. Always have on other grows too.. But maybe I've always been giving them too much Nitrogen in bloom.. Just seems more like a 'not getting light' kinda thing.. But now that it's on the top of the colas.. I'm thinking its a Nitrogen thing.. Anyways.. Such a gorgeous plant! Gorgeous colors.. Amazing smell.. Just... WOW! Lol Next day.. Ok I'm thinking the clawing is getting a little worse.. That's after I fed her using .75mL/L of Micro and about 10 drops of Floralicious Plus.. Both containing a bit of nitrogen.. I'm going to have to completely cut out the Floralicious Plus and just .5mL/L of the Micro.. I hope that doesn't cause any different issues.. It shouldn't.. And I'm going to bump up the Kushie Kush bloom booster a little.. Still not full strength but getting closer.. I hope this doesn't affect my final yeild and/or taste! I will literally cry if the taste is fucked up at all... 😢 lol.. Nah.. As strong as it is now.. I think that would be impossible! I got my new tent in yesterday.. Haven't set it up yet tho.. Gotta get everything ready to switch over soon.. It's still a 2×2.. But instead of 48" tall it's 55" tall.. Which would be a little better for taller plants (not by much.. But still better lol).. Anyways.. No more Floralicious Plus and only about half of the Micro doses (lol) that I intended to use in the first place.. She really doesn't like Nitrogen in flower.. Which is understandable.. But I've never had a plant this sensitive to it before.. Good learning experience for sure! End of week.. So I bought a Brita filter because my tap water is pretty shitty.. 240 PPM - 260 PPM.. I've only ran about a gallon through it and its barely bring it down to 190 PPM - 200 PPM.. I mean.. I also didnt use the actual Brita filter yet.. Just the Wal-Mart brand.. It sucks obviously.. When I run the actual Brita filter in my drinking pitcher.. It can bring the tap water down to about 160 PPM!!! Compared to the Wal-Mart filter.. That is fucking incredible! I'm thinking when I run a couple more gallons thru, it will hopefully bring it down a bit more.. I don't need it to be 0 PPM.. just not 260 PPM.. That's fucking insane! Our water sucks out here.. The plants dont seem to mind very much, but after using the filtered water, instead of the nutrient water being 1150 PPM its barely 980 PPM - 1000 PPM.. NOTot a huge change.. But I think it will help. For harvest, I'll use the FloraKleen once along with distilled water.. Still got a few weeks before thinking about that.. But I always flush with my tap water and can't ever get the PPM below 400 PPM or so... Now about the plant lol... Yeah, it's gotta be nitrogen toxicity with the clawing leaves.. Again, I've went down on the Micro since it has so much nitrogen.. And also cut out the Floralicious Plus.. Sometimes I'll add a couple drops.. But it really makes me nervous lol.. I DO NOT want to hurt the yeild or taste of this girlie! But she is doing good.. Just as a test, I added a little bit of some feminized pollen to a very small nug on the bottom.. Its photoperiod pollen.. But this should create a "fast version" according to Sweet Seeds.. But she is doing good.. Smelling amazing.. Gorgeous colors!!.. Anyways... On to the next week!!!...

Harvested.

Poussé sous les mars hydro 45 jour ensuite changé les lumiere par une sun system rs1850 de 720 watt . Les foxtail on apparue lors de-là flush il y a 14 jour . 30% ambré

🍁 Mexikan Airlines Automatik (42 Fast Buds)

D71. I think I'll be putting her into darkness with a a few days to a week. She still getting fatter. Lovely smell. D63. Into darkened room 36 hours. D74. Chopped. Wet trimmed

Noch keine seed Ansätze zu sehen und wir hoffen mal das es so bleibt. Still no Bananas or seeds to see, still hoping that all turns out good

Gracias al equipo de Fast Buds, XpertNutrients y Marshydro, sin ellos esto no seria posible. 💐🍁 Gorilla Melon: La Gorilla Melon crece más hacia fuera que hacia arriba, lo que resulta en una planta tupida y manejable. Produce cogollos pequeños, sólidos como rocas y muy pegajosos, que envolverán sus ramas al final del ciclo de cultivo. Esta variedad desarrolla muchas colas, así que no te preocupes por el rendimiento: te cubrirá con un suministro de flores agridulces de primera calidad. Al fumarla, mostrará sus terpenos de melón, heredados de nuestra cepa keeper cut of Melon, con los toques de un sabor clásico heredado de GG#4 (Murdock GG Strains). Otra cosa que hereda de sus padres es su fuerza de gorila, que le permite resistir a cualquier tipo de estrés. Puedes hacer toda la defoliación que consideres necesaria, o coger todos los clones que quieras, y verás cómo se recupera casi instantáneamente y vuelve más fuerte que antes. 🚀 Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/gorilla-melon 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Esta semana toca trasplante a maceta definitiva de 6 litros, aplicación de tierra de diatomeas y rocio con arbol del te diluido en agua como tratamiento fungicida, repito este proceso a los 15 dias. Buena semana, ellas se sienten felices en su entorno con 5 min de luz extra cada hora. Luz UV Marshydro adlite 2 x 15w. Sigo con las dosis de nutrientes recomendadas por el fabricante. Potencia del foco: 50%

Getting the Veg game on, these are already flipped for about 3 days beautiful structure on all the unicorns.

23.02.22 4 день цветения. Опрыскиваю раствором Fulvic 24.02.22 5 день цветения. Вытащил проволоку, опрыскиваю раствором Fulvic. Делаем раствор на 4 литра воды: MGB=7,92/5,28/7,92 + Fulvic 8мл + Pro Bloom 0,8 мл. 25.02.22 6 день цветения. Опрыскиваю раствором Fulvic 26.02.22 7 день цветения. Опрыскиваю раствором Fulvic. Снял скрог и пообрывал нижние листья и ветки, немного перераспределил колы, заново повтыкав фиксирующую проволоку. Убрал немного верхних листьев, чтобы свет поступал к нижним веткам. 27.02.22 8 день цветения. Опрыскиваю раствором Fulvic. 28.02.22 9 день цветения. Опрыскиваю раствором Fulvic. Сегодня температура в дневное время была ~20 градусов, скачет напряжение в сети + забыл закрыть окно, а на улице - 5градусов. Полив талой водой 3 литра + 6 мл Fulvic + 0.6 мл ProBloom 1.03.22 10 день цветения. Опрыскиваю раствором Fulvic. Пообрывал немного листьев, освободив нижние ветки для доступа света. 6я неделя завершена - растем и развиваемся=)

Leider spielt das Wetter nicht so mit daher langsame Fortschritte. Update : 21.06 Das Wetter wird besser und die Ladys geben langsam richtig gas 🥦🔥

Well as always I'm super happy with what the team over at @fastbuds are doing ! To be honest they were my first auto flowering brand I tried and they sponsors that grow because they like helping growers. Easy to approach and great customer service I have not been disappointed yet and this strain here is a keeper . I wish I could bottle the scent up and keep it forced 🙂. In the beginning I wanted to grow her out in a Christmas themed container do she was put into a snowman ⛄ deal placed into a 2 gallon pot . The soil and all additives are organic , living soil a Canadian company blend . She honestly was knocked out twice from her container and her size is tall but not many buds I stressed her out a lot . If she wouldn't have fallen out and been in a 4-5 gallon container then I would be even happier . The scent alone makes up for the size I could smell it all day . Never have I smelt an auto flowering strain like this before . Over fruity like ripened strawberries and lots of gas to be had as well . Today I decided to chop her down and make room for the next generation a head . The fact is that I enjoy all strains and don't care whether it's an auto or a photoperiod this company makes some fine plants and have been in my garden for almost two years now they are my go to auto flowering company ..cheers We got a smoke report going now and it's a bomb smoke I can't believe this was what I got . So much fruity and earthy undertones with such sticky buds I'm in love .. wish I had this whole plant in my garden it's fire smoke a great indica buzz

After germinating the seeds are transplanted into small pots with soil (see tutorial in VIDEO above). The soil is prepared with water mixed with a little bit of BIO NOVA Roots (0,5 ml/l), which aids the development of the seedling. Transplanting is very easy now, because they have grown a STRAIGHT tap-root while hanging during the SERIOUS' WAY of germination. This straight root allows for easy potting of the seeds. Simply make a little hole in the center of the soil with your pinky finger and carefully place the germinated seed with the white root pointing DOWNWARDS into the hole. Best is to lay it onto one side-wall of the hole with the seed shell right at the surface. Then I push the other side inwards and enclose the whole root with soil. At the end only the top of the seed-shell peeks out of the soil. IT IS VERY IMPORTANT to plant the seeds NOT TO DEEP into the soil. The seedling only needs extra strength to work itself upwards thru the soil and you run the risk of the soil drying out and the seed dying off. When you PLANT THE SEED VERY SHALLOW into the soil (=with the top of the seed-shell still peeking out) your seedling can grow out right away and you have a small plant already 24 hours after putting the seed into the soil. The small seedling sometimes still has the seed-shell on its 'head', it normally falls off by itself, but sometimes you have to carefully help and take it off with your finger nails. Be careful to NOT clip of the seedling accidentally when you do this! The seed-shall has an inner lining, which feeds the small seedling when it germinates. This inner lining sometimes gets tangled around the stem of the small seedling after the shell has fallen off. This little skin MUST be taken off the stem right away! Once it dries up, it gets hard and can strangulate the seedling around the stem. In order to avoid this, the skin must be taken off as soon as possible! I show it in the pics above and also made a video about taking off the inner lining of the seed.