Likes
Comments
Share
@Ryno1990
Follow
Purple Goat Cheese fast flowering photo from Goat Genetics comming in nice on her first week of veg from seedling stage Comming up on the end of week 1 of veg they are now planted into 1 gallon pots were they will stay for a little wile
Likes
1
Share
Subimos la temperatura de la sala y vaya si se noto, las plantas crecieron más en 2 semanas que en un mes, una pena no haber podido aclimatar antes la sala
Processing
Likes
112
Share
@Dunk_Junk
Follow
She's growing well lately. Buds are getting dense, not many trichomes yet. Pistils are changing though so another few weeks to go I think, maybe 3 weeks..... The other two got harvested during the week so she has a much more room to spread out now 😍 👍
Likes
8
Share
All in all this was an amazing harvest I usually have around 8-10 plants and harvest anywhere from 24-36 ozs per harvest with the 8 plants I had this harvest including the biscotti mintz and cookies USA I ended up with 898g total dry weight with all top quality flower. I’ve learned some things with all my previous runs when it comes to dialing in my quality and yield and definitely watching for those herms because I like to push my plants to the max when it comes to training ! GMO PUnch -Greenpoint I’m giving this a total score of 7-10! Biscotti Mintz- Barney’s farm Total score 10-10 Cookies USA score 7-10
Likes
28
Share
Youtube video coming soon Check the other diairies! Along with harvest and bud pictures in the next couple of days! I love this strain no doubt
Likes
27
Share
Start of week 7 for Kalini Asia Shes really starting to stink up this tent. Going to slow down on the watering these next 2 weeks as she slows down her own drinking rate. Should start to see some fattening up these last 2 weeks shes got.
Likes
27
Share
Performed the "back building" technique this week to help bulk up the top cola. Watering the soil when dry, and defoliating the dry-dying fan leaves.
Likes
11
Share
Sunday, January 17 Fed 1/2ga to one plant and 3/4ga to the other two. 7tsp of Grow Big and 2.5tsp of Bud Candy mixed in 2ga of water @6.4pH. Plants continuing to stretch, fed Grow Big to try and add some nitrogen. Thursday, January 21 Fed about 3/4ga to each plant. At a ratio of 2 teaspoon per gallon of Bud Candyat 6.4 pH. Saturday, January 22 Fed plants 3/4 ga @6.3pH 2tsp/ga of Bud Candy. I did a defoliation of all 3 plants and decided to flip to a 12/12 light schedule to see if I can trigger blooming. I began last night and I will continue to do so and hopefully see results sometime soon. I’ve looked up the issues of auto flowers not flowering and being “stuck” in the process. I did these two techniques(defoliation and light schedule)to try and trigger flowering. Hopefully we’ll see some results🙏 As always, stay safe and happy growing💚✌️🌱
Likes
29
Share
30/08 They both on the surface So, lil amount of water + low DLI about 10 to 15 to start with. That´s about the advice I have gotten the last month... cause we need to do somethin about our succes rate!!!!!!! Hi ladies 👐👐👐😊 all good... 2 identical seedlings... they are both against the side of the wall, out of the sun, into the shade. The outdoor sunscreen is very reflective, so enough light! Not too much water... 🤞🤞🙏 31/08 flower mix is jump startin 👍 Feelso right man!! ❤️❤️ in the tent 👍 gonna keep an eye on the DLI !!!! Not too much water 🤭 spray the surface daily Moved into the tent, lookin to create some shade, 10 tot 15 DLI... 🤞🤞🤞 first 2 days doin excellent!! 😍😍😍 3th day and still goin, sprayin them with water, stretchin a bit... Looks good, Fastbuds doing it again!! 🤞🤞🤞 😍😍😍😍😍😍 One has stopped growing, falling down... Dying...
Likes
8
Share
Welcome to Flower week 7 of Zamnesia Kalini Asia I'm excited to share my grow journey with you from my Zamnesia Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Kalini Asia : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Zamnesia • 💧 Humidity Range: 35 • ⏳ Flowering Time: 7-8weeks • Strain Info: 22%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 16 • Nutrient Brand: Narcos • ⚡ Lights : 600W x 2 I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!
Likes
422
Share
Hi all 😁 Hope everyone keeping well and having a wonderful week! Thank you all for such amazing support on this bananas journey 💚💚💚 Will be updating this week journal daily so please remember to revisit to see full week content. So far this grow it's going great. Girls are stretching by hour. Great health, nice green colours, more and more squares taken on the netting, flowering nicely progressing, I'm very happy 😁 Planning to apply more selective defoliation, especially to Xena. No changes to nutes except few extra drops of calmag just in case and will try to fill the net entirely. Week 7 Nov 27- Dec 3 Nov 27 Selective defoliation applied on Xena. 8-10 mainly small fan leaves. She is still a bit shy to open as much as her sister. No rush my girl. You still doing great! Nov 28 First watering for this week. 7ltr beetwen them both with 4h spread. Runoffs. Xena 300ml PH 6.1 Athena 250ml PH 6.4 😁. So far the largest amount of my magic mixture consumed by my 🍌💜👊 girls. Well done👏 Nov 29-30 Leaves tucking and joyful observation🤓 Dec 1 Selective defoliation and first stage of lolipopping on both girls. Decided to go a bit heavier as tomorrow heading for trip and wont see my girls until Tuesday! They will be all alone without any supervision so hopefully they will behave and I will be nicely surprised of their development on my return. Watered with 2tr mixture and sprayed with water and fish mix solution right after defoliation. Planning to feed them tomorrow as much possible 6-7ltr before heading off to our voyage to Amsterdam 😎 do anyone know ls if any of coffeeshops have Fastbuds strains available? Would love to try 🍌💜👊🤤😋 Dec 2 Girls watered as above and both PH 6.4 on runoffs. Dec 3 Girls are unsupervised until December 5th. Thank you all for such amazing support on this journey 😊 love you all!!, 💚💚💚 Stay tuned for upcoming week update right after my return. Peace and love brothers and sisters ✌️💚
Likes
5
Share
🏆 Harvest Report – Cherry MAC Muffin Final dry yield: 161.71 g The highest-yielding plant of the entire grow – dense, heavy flowers with excellent structure and minimal stem weight. The buds cured into a standout mix of: 🍒 Cherry sweetness 🍦 Soft creamy undertones 🌈 Deep purple highlights on the tips and sugar leaves The resin concentration was extremely high, giving the buds a frosted, almost glassy look. Drying went smoothly thanks to the tight flower formation and healthy fade-out during flush. No oversaturation, no nutrient residue – everything finished clean and aromatic. Cherry MAC Muffin ended the run as the visual and aromatic highlight of the tent. Outstanding vigor, strong late-flower development, and one of the densest structures of the grow.
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
7
Share
Flushing her out this week- Only drawback this entire grow was she was super nitrogen sensitive. Barely fed in veg and followed the advance nutrients and green gro protocols cut in half— and she got a bit of a nitrogen claw. Other than that, fading nicely. Great structure, decent frost, terps are more earthy/piney now versus runtz (we know that can change) These ladies have massive fan leaves and are shorter in stature- making it an easy grow. Will be harvesting soon. 🏻💚
Likes
42
Share
@Lukush
Follow
Thank you Zamnesia for the wunderfol strain ! I'm really excited and happy of the results 😎 hope you all enjoy growmies! Thank you for ho has been following me in this journey ❤️
Likes
10
Share
Very golden in colour, has a beautiful structure and a spicy smell. I really liked how even the bottom buds became chunky (: Def happy I tried this one
Likes
16
Share
LST went good the plant is growing ervery day for 1-2 cm I am very happy with the products used.Until now i didnt run in any issue :) Starting to give a little more Water.
Likes
4
Share
Thank you thank you Dinafem... My favorite Haze is back in my vault... This pheno was incredible and fast for a Haze sative... Cutting her down in a few more days 😍😍😍😉