Check the winners The Grow Awards 2026 🏆
Likes
62
Share
@Roberts
Follow
Do-Si-dos auto is growing really good. She had some training done today. The strange spotting stopped on the leaves a week ago. I think she just wanted more feed. Everything is looking great now. Thank you Athena, Medic Grow, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
13
Share
It looks to me like GSC1 it right on schedule and will finish up in about 2 more weeks. I just hope the nutrient burn doesn't effect the yield too much
Likes
32
Share
14-10-2021: Actually I have to start a next week by tomorrow but I have changed so much today I decided to start a new week today.It is still not easy to maintain a VPD of 0.7..... Well it is only an indication in my case because unfortunately I still do not measure the leaf temperature. Temperature was a bit on the high side last night because the temperature sensor of the PK125 has now ended up under the foliage. Of course it is a lot cooler there so it kept running at 10% I have adjusted that, so tomorrow I expect a completely different temperature trend. Also completely emptied the system today and replaced the Hy-Pro with Ata Awa MAX. I have exchanged the Calmag with the Green Sensation, so this will also be dosed (1 ml/L) from now on. I will add Calmag from now on with a pipette. Let's see how the PH is going, as the packaging of the ATA states that it is self-regulating. If that is the case I will put CALMAG in the reservoir of the PH- and reprogram the system. I have chosen not to scrog today. I drilled a hole in the middle and the container to the right of it and killed quite a few roots (unfortunately the drill went through) and that seems, in combination with other nutrition, a suddenly somewhat lower temperature and the torture between the leaves to to get the sensor in place is enough stress for 1 day to me. So they can now go to sleep and tonight we'll see if there is damage. I'm guessing it's not that bad because previous experiences have told me that they can take quite a bit. 17-10-2021: Flowers are starting to form. 18-10-2021: 2 hours of bondage ;) 139 tie-wraps. Damn.. this is a lot of work on a daily basis 20-10-2021: Finally some white hairs on them.. Damn... never took this long. Will it be because of the high temperature?
Likes
26
Share
@Sickone
Follow
Ab geht es in die 2. Woche PPFD wert wird auf 225-250 hochgeschraubt Lux wird von 7k auf c.a 8.500 - 9.000 in 18H angepasst Lampenabstand bleibt vorerst gleich da die Blätter sich meiner Meinung nach hervorragend ausprägen. Temperatur wird Tagsüber zwischen 25 und 27 Grad maximal gehalten bei einer konstanten Luftfeuchtigkeit von 65%+ Heute am dritten Tag der Woche habe ich mich dazu entschlossen die Ladys in ihren finalen Topf zu Pflanzen, da mir dies öfters geraten wurde und ich leider diesen Fehler von Anfang an hätte vermeiden sollen. - Falls ich nochmal zu Automatik greife, werde ich diese direkt in den finalen Topf geben - Gute 48h nach dem Umtopfen ist ein deutlicher fortschritt am Blattwerk zu sehen, meiner Meinung nach haben sie das Umtopfen bisher gut überstanden
Likes
121
Share
No reservoir change this week in the end, just top ups and nutrient top ups - If I stop being lazy, I might do a complete change out tomorrow (D85). They're getting really frosty now. Can't wait to make some leafy THC snow in a few weeks time after I install my 24w UV-B tube above the canopy. Starting to pack on some lateral buds as well, pretty much mirroring last grow in terms of growth so far, without hacked off tops this time :) Can't really do anything about the wind burn, just got to accept it, otherwise the fan is on too low and doesn't move air properly. Solid argument against excessive leaf removal here: https://www.cocoforcannabis.com/community/photons_corner/to-defoliate-or-not-to-defoliate/ --UPDATE D89-- After the reservoir change on D85, I upped the pure blend tea to 10ml/US gallon, by god she's exploded. I think as a whole, the bud mass is almost on par with my last grow when it was chopped and there is still another 40-45 days left in her... Fingers crossed I don't fuck this one up 🤐 Thanks for stopping by!
Likes
17
Share
So far it seems to be fine even if the high humidity worries me even if the temperatures are still high then they have stopped growing and will finally focus on the flowers and slowly we recover these small deficiencies
Likes
55
Share
@BodyByVio
Follow
Had to put another layer of netting for support.
Processing
Likes
8
Share
Well week 1 of flower first day 12.12 light schedule finally figured out how to make changes to heights and nutes on this sites diary, starts todayran into a slight problem with the jack herer seeds they had a rare over growth of inner follisge that developed after topping and within 4 days before going into today week 1 of flower to remove scrog net and re prune they seemed to react differently than other breeders same strain but no big deal cut netting off to avoid damaging during end of veg before plants Garrett to tall which I have the room for just not the extra time it would of taken so we are starting flower and will just grow wall to wall in this 48x48x80 tent
Likes
28
Share
Our issue #6 is the revelation of grow. It didn't look like much of her at the labori so much so that we put her in a 6.5 pot. Never underestimate a bomb never guys has unlined flowers and cm and she can be seen going to fill. In a bigger pot she would have been frightening. https://seedsmafia.com/en/ https://www.mars-hydro.com/
Processing
Likes
54
Share
@rhodes68
Follow
1/15 Begin week 3 I swear they look a full week older than 15 days... interesting. Obviously they like the protocol. 😉 Loving the CocoTek Not topping till I get them transplanted in a few days. Plan is to top twice, we going to see what we can get from these newbies 😇 Leaving feed as is until transplant into 5 gal of 75% coco 25% perlite *Fastbuds - They are taking nuets very well and I would increase but size is getting to be an issue at this point. Both the FFT-7 and 5 could take higher ppm. We plan on doing a clone grow with one of each strain to grow entirely for size and yield without size restrictions. See what they do when given lots of space. Zhaan is looking to be a bit different pheno but not stress induced. 1/17 Transplant day Finished preparing coco by thoroughly washing the pots in the bath tub till runoff clear-ish, 50ppm Soaked pots with one quart of 5.9 nuets and Kangaroots 10ml/gal and transplanted the garden bags, god the roots are incredible. In the Veg tent now Wife named the veg tent Moya and its stuck so now the danged tent has a name 😉 1/20 ITS WEASEL STOMPING DA... errp no... Topping day All topped at either forth or fifth node, pics up there 1/21 Noticing some mag def and random Ca spots on Jool in particular so getting a dose of Cal-Mag 3ml/gal as well as the foliar. See this as due to the low levels of CocoTek or perhaps the stress of topping but do not want to increase nuets at this time.
Likes
22
Share
12/25/2023-Germination Day 1 Merry X-mas 2023 I decided to start a run of SolFIre Gardens Hoodz Candyz S1. I am going to do a cup filled with RO water a touch of Hydrogen peroxide and let it sit for 24-48 hours until I see tap root then I am going to put it into a rapid rooter.. Tap root Down and put it about 1/4 of the say down the Rapid rooter. I made some modifications to my basket on this run.. I have taken a few Pods that I use for my cloning machine and decided that I am going to try and use them as sure plants, so that I can take my water right up to the bottom of the basket this time and see if these can make my planting more consistent.   12/26/2023-Germination Day 2 Tap root achieved Planting Commencing 12/27/2023-Germination Day 3 Misted the dome lightly misted the rapid rooter and added a little water to the bottom of the pan to encourage root growth to the pan. 12/28/2023-Germination Day 4 Ground Hogs day 12/29/2023- Germination Day 5 She is up, she has broken surface, I misted the root riot, and around the bottom of the tray to try and entice root growth down rapidly. 12/31/2023- Germination Day 6 Ground Hogs Day 1/1/2024-Germination Day 7 HAPPY NEW YEARS!!.. I did it I planned it out so my planting day would fall on New Years and it worked.. Yay!!! 1/2/2024- Germination Day 8 Since the roots are not to the water yet, I am pouring one cup of water lightly on the hydroton around the lady to try and encourage root growth down to the water.. 1/3/2024- Germination Day 9 Ground Hogs day, will continue until roots hit the water. 1/4/2024- Germination Day 10 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/5/2024- Germination Day 11 Ground Hogs day, will continue until roots hit the water. I am going to change the water Sunday and kick off Week 1, I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 12 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 13 Ground Hogs day, will continue until roots hit the water. 1/7/2024- Germination Day 14 Ground Hogs day, will continue until roots hit the water.
Likes
20
Share
@Gg_kush
Follow
I didn't do a lot on this one, but he goes on his own like a big boy!!
Likes
15
Share
Will update with dry weight in 2-3 days 👽 Update: 52 grams!!! Wow!000
Likes
24
Share
Well guys it's week 8.. I think lol. I'm 100% certain (Not really) that I took clones from 2 different mothers again... like a real cotton-headed ninny muggins. I'm at a loss when it comes to harvesting early what seems to be done, waiting, and how to do it all with flushing. So any help in that practical aspect would be dope. I'm really excited to be rolling out of this one, to be honest. with all the mothers big and clone ready I can finally just ease back into something more beginner level, shorter, whatever you wanna call it haha. The plants all look healthy though. I don't think I really made any big nutrient mistakes. I used LST to get those big colas away from the light and they seem to be fattening nicely making me wonder if I should just leave everything for 2 or 3 more weeks. I decided to throw a PK booster in there. I read online that most in hydro will use it throughout the flower cycle if needed and I was getting weary about the other plants not fattening up. I just keep hearing these things should yield crazy and I'm not seeing it. Then again it has been a bumpy ride. The nutrient change was done on the 14th and the photos are from today. Stay safe yall
Likes
5
Share
10 weeks from seed to harvest. The nutrient line I was using didn’t give me optimal growth, for this strain and my level of experience. Had some great growth and veg time, about 4 weeks, but when flower kicked in they got beastly. I would say I had two different phenos of this strain, and the one pheno that is unique, had slightly looser buds than the other two. This could be because of the LST/super cropping of the main cola. The other two had nice rock hard frosty buds and have similar smells and profile. The other one has more citrus, and was a bit lanky, more sativa in looks. Overall, easy enough to grow, no major surprises, and decent enough yield for 10 weeks. This is a strain that could have been better had I not had some issues with either lockout/deficiencies.