Plant was transplanted in to 5.5 L pot

TOP. COOKIES FF BY 420FASTBUDS ..

QUESTION TO EVERYONE READING THIS: My tap water is pH 8.3 (yes I know right ?!) Adding the BioBizz nutes brings it down to pH 6.2 - 6.4 depending on the amount which is great. Now, I dont really care about runoff pH that much, doesnt tell me a lot imo but I measured it twice, last time it was 6.8 this time it was 7.1. Is there anything to worry about or is that just irrelevant? Thank you guys :) Day 48: Watered the Liberty Haze with 750ml Water and 2.8ml / l BioGrow, 2.8ml / l BioBloom, 0.7ml / l TopMax which is the equivalent biobizz week 7 feeding schedule with 70% strength on BioGrow & TopMax and 90% strength on the Bloom. Therefore, dont mind the leaves hanging down, I just watered before taking pictures. Also tied down one or two branches a bit more to make the side branching even again. I dont really realize how much the plant actually stretches, the Liberty Haze seems to start budding already while the G13 Haze is still a bit behind. Day 45: I really wanted to try serious and "professional" training methods. Defoliation was obviously needed, I couldnt even see what was going on below the plant. Removed all leaves except on the top 2-3 nodes of each branch. Then I did some heavy LST to move the side branches to the outside for filling up space. I hope the center will grow some branches at some point. Unfortunately, I couldnt supercrop the main branch like I did with the G13 Haze because the stem is weakened due to the partial break. It looks a bit fouly (the break wound itself) but at the same time it looks like the plant just "abandoned" the damaged tissue and continued growing using the remaining part of the stem diameter. Sounds really weird, but it definitely makes sense considering that the plant didnt even stop growing at all. ~Watered 650ml today, too Day 44: Everything seems to go well. Apart from the snap though LOL. But seriously, it doesnt seem to have affected the plant at all :D I did some LST and was very careful ! The Liberty Haze seems to be a bit stiffer than the G13 Haze so I was extra careful which was a good choice. I decided not to train the main branch anymore at all, just the side branches to keep them even. Lets see :) Also the Liberty Haze is quite smelly for not having buds yet. If it was just the G13, it wouldnt smell AT ALL and I wouldnt even have to use my carbon filter !!!

Before starting this harvest chapter, I want to apologize once again for not uploading everything directly into the official harvest and smoke review tabs. GrowDiaries has been struggling a little with very large uploads lately, and with the amount of photos, videos and information involved in this Ghost Train Haze harvest, I decided to split everything into multiple parts to make sure nothing gets lost or broken during upload. And honestly… this plant deserves the full story. So welcome to Part 1 of the Ghost Train Haze harvest. 🌱✨ Before talking about harvest itself, let’s do a quick recap of how we even arrived here. This was another 12/12-from-seed run. No traditional vegging. Very little manipulation. Minimal training. Mostly just letting the plants naturally express themselves while guiding environment, airflow, watering and light intensity carefully around them. Instead of forcing the plants into a shape, the goal here was to let them grow naturally into the PPFD and into the environment themselves. And wow… Ghost Train Haze really showed personality during this run. Most of the attention naturally went toward the massive main plant everybody keeps seeing in the photos — the giant colorful spear covered in fading reds, dark purples and swollen flowers — but there were multiple plants in this room, and in this harvest report we’ll finally start talking about all of them and the different directions they took after harvest. By Week 14, the room looked absolutely incredible. The fading on these plants became something special. Deep reds. Dark purples. Almost black tones in some areas. Golden fading leaves. Heavy trichome coverage. Color spreading through the sugar leaves and surrounding flower tissue. One of those harvests where the plants almost stop looking real. And underneath all those colors: extremely heavy flowers. Dense. Massive. Sharp aromas. Long spears everywhere. The branches became so heavy during late flower that support was absolutely necessary. Yo-yos were holding branches constantly, helping prevent collapse under the weight of the flowers. And the moment the supports came out during harvest… everything opened and leaned downward immediately under its own weight. That alone says a lot about the size and density of these flowers. There are photos in this report where I’m holding entire plants, and honestly, seeing them outside the tent really puts scale into perspective. It’s one of those plants that instantly makes you imagine how unbelievably huge she could become outdoors in native soil with unrestricted root space. Harvest day finally arrived, and from there the project split into two different paths. Some plants were harvested whole and hung for traditional drying. Others were fully broken down, every single flower removed from the branches, vacuum sealed into bags and immediately frozen for ice-water extraction work. And this is where things start becoming really interesting. Because this report is not only about harvesting flower. It’s also about exploring different post-harvest directions and understanding why growers process material differently depending on their goals. The flowers selected for traditional drying will continue their journey in Part 2, where we’ll focus much more deeply on drying conditions, moisture management, branch snapping, trimming and curing. But for now… let’s talk about the frozen material and ice-water extraction. ❄️ After harvesting, the flowers destined for washing were separated carefully and placed into vacuum bags before going into the freezer. Freezing fresh material helps preserve volatile compounds, terpene expression and trichome integrity while preparing the flowers for ice-water extraction. And no — this is not simply “throwing weed into ice.” There’s actual science and technique behind this process. Before washing, the frozen material is combined with ice and extremely cold water, ideally close to 0°C. The goal is to make the trichome heads brittle enough to detach cleanly while keeping unwanted plant contamination as low as possible. At the same time, the flowers need time to fully soak and rehydrate slightly before agitation starts. This helps reduce excessive breakage of plant material during washing. And then comes the wash itself. The bubble washer machine agitates the mixture gently, allowing trichome heads to separate naturally from the plant material and suspend inside the cold water. From there, the water passes through a series of filtration bags with different micron sizes. 25 micron. 45 micron. 73 micron. 90 micron. 120 micron. 160 micron. 220 micron. Each size captures different grades and sizes of resin heads and contaminants. We are not using every single bag configuration during this run, and we’ll go much deeper into grading, collection quality, drying and final results later in the series. But since this report already includes videos and photos of the process itself, I thought this was the perfect moment to explain what ice-water extraction actually is — and what it is not. This process is not about adding anything. It’s about separating what the plant already naturally created. Water. Ice. Agitation. Filtration. Patience. That’s it. And honestly… watching these resin-covered flowers moving inside ice water almost feels hypnotic. The harvest itself may be finished… but the real post-harvest journey is only beginning now. This report will continue in the next update very soon because there is simply too much material, too many photos and too much information to fit properly into a single upload without risking GrowDiaries crashing or losing content again. Part 2 will continue deeper into: the drying process, environmental control, trimming, flower handling, and the continuation of both post-harvest paths. And eventually, Part 3 will close the circle with curing, smoke review, flavors, extraction reflections, effects and final thoughts. As always, thank you to everybody following this journey. To Zamnesia for the genetics. To Plagron for the nutrition. To all the gear keeping this room alive day after day. To GrowDiaries itself. To the community. To the longtime followers and OGs. To the new people arriving every day. To the curious ones. To the silent supporters. To the lovers. To the skeptics. To the haters. To everyone who stopped by, even for a moment. Thank you for being here. 🌱 Part 2 coming very soon. ✨ 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

That's how I know the crop was harvested too early:( ..... but only because someone started visiting my place of cultivation and took my two girls, and left two, so that he wouldn't come back a second time and take them, I decided to cut her down earlier:( that's it such news awaited me when I returned from vacation, but overall the girl looked very beautiful, although she got a lot of stress when the snails ate her, but she endured it and recovered very well:) I will dry the bigger flowers and make bubble hash from the rest, good luck to everyone be careful in nature :).

Skipped uploading last week, due to I kept getting errors. Other than that WWXXL is staring to show its beauty. Buds are looking fab. switching to PH'd tap water now. RO water is kinda a pain stripping all the metals. Recharge .5tsp/2.5gal

Welcome to Flower Week 1 of Fast Buds Blackberry Auto I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Auto strain Blackberry : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 9-10 Weeks • Strain Info: 23%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 12 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Week 6 successful 🌱 one panty punch is done harvested this beauty on day 40 . Pictures coming with the harvest of panty punch. Beanz 4 Locoz looks crazy .

Got the filter that could be used to clean the tap water, so we changed the water in the system to be filtered water and make some upgrade on the system.

17.05. I don't have anything special to say, of course the weather is terrible... it's 6-7 at night, 15-16 during the day, so they're inside... the temperature inside is 20-21 during the day, at night from 15 to 17 when it's this cold... the plants were exactly 3 weeks old yesterday, today they entered the fourth week and most likely they will wait inside for the fifth week as well because the weather is terrible and there is no point in transplanting yet. Stay High!

Que pasa familia, perdonar por la tardanza pero aquí estamos de nuevo y es que traemos la 6 semana de floración de nuestras gorillas. No veas que aroma que empiezan a desprender , es increíble. Son plantas con forma indica y follaje sativa, floración rápida unas semanas más y ya están listas para cortar. Ph controlado, 7 semana prepárate lavado raíces y solo agua, que lo agradecerán.

I plan to harvest #2 and #6 soon. I hope to document with pictures and videos.

Just water with PH 6.0 untill harvest day.

19th Trichomes still clear / 10% half milky 22nd Imo 50 clear 40 milky-ish 10 Amber

1/17 Week 10 and wow Ok girls are doing well not a worrisome issue to be found unless its space. Brought Dink to the Flowering tent put Bambi in the Auto tent Dink is a very WIDE plant and thats a problem in the 4x5. Dropping Koolbloom for a while in favor of Peak, its better its expensive but Pussy has gotten to the point of fast building so bringing it in. Octo, Solitaire, Chew Mee and Plenty will benefit well. Pretty much everything else as it was last week no serious changes to nuets. We decided to go with 6 clones instead of the 9, we need a break and this keeps us under the plant limit. 1/19 Dropped Bloom 10% for Flowering plants Reset the auto tent for easier access Clones now in the 3x3

Day 7, they didnt all pop but most of them did I think 2 didnt break the surface. Theyll get another week or so in the cup while some space opens up then go into 3 gal bags for a quick veg

All details will be added every day/week if u have any questions feel free to ask. December 4th:starting in the winter, veg and bloom will happen under 400watt hps to keep the grow room warm. the seeds have been germinating for 2 days with the wet paper towel technique, they got root and are now in soil and the rockwool cube. for now im just waiting for the seeds to show root coming out of the rockwool, then i transplant to the netpot with clay pellets straight in the dwc, untill then they get fluorescent light (max 7 days) these are autoflowers so they get 18 or 20 hours light. nutrients General hydroponics three part :micro gro bloom and calmag water: rainwater (25ppm) i hope the room wont cool of too much when the lights go out. Day 1 (December 5) seeds start to come above the rockwool and the soil Day 2 (december 6) stems start to stretch i give them both pure rain water with 100ppm calmag when they feel dry. Day 4 (december 8) still no root visible out of the rockwool Day 5 (december 9) root visible outside of rockwool cube and transplant to the 55Liter rdwc air pumps 10l/minute Day 7 (december 11) root comes trough netpot, i lowered the water by removing 3Liters

These girls didn’t give me any issues at all. They just screw themselves. I planted one seed and when I did the mainline, I cloned the top, which is how I ended up with two plants. I can’t believe how big the buds got all this girl trimming it was a nightmare. There was so many leaves, some of the buds are so big that I did a small amount rot in one of them It’s so happened to be the biggest bud. I was running the humidity kinda high about 60% the whole time. About this plant doesn’t have much of a nose on it but she looks great and Got over these two.

Day 106, Flower Day 50. Looked at Trichomes this morning. GSC still showing some glassy/milky look. Bubba is pretty milky colored. Still needs at least a week. Went on vacation last week. Had somebody else water. They closed the door, so not as good air circulation. Bubba showed powdery mildew. Not yet severe, so I took the plant outside, trimmed off some fan leaves that showed mildew. Then I sprayed the entire plant with a 25% milk solution (whole milk) and let it dry. Back in the tent. Cranked up the inline fans and added a small fan to the Bubba tent. Just need a couple more weeks.

I use catalyst once a week haven't run into any issues White Widow has a extra month of veg time