Likes
Comments
Share
This plant grew small and compact about 2 feet tall. The plant with the most trichomes was heavily cropped before flowering began. She’s very earthy with a hint of lemon, and probably the fastest maturing strain of grown yet.
Likes
20
Share
@Canadian
Follow
The plan seems to be in pre flowering has not gone into full flowering yet so far it is showing Great Signs creating lots of branches no real smell to it but she's pretty to look at it thank you for reading I will continue to update have a happy grow
Likes
14
Share
Enjoyed this run. Ready to harvest in about 1 and a half weeks, I actually have seeds in a couple of the plants. It happens, this is my first indoor grow so, need to get my hand on some new genetics
Likes
6
Share
This week is sunny 🌞 . Started giving Big bud. Watering 2-3 liters per plant.
Likes
12
Share
@Luke_Lee
Follow
Grow #1.1 -20.06.2024 Today the seeds were planted in the 11L pots directly in the soil. The lamp hangs 100cm above the pots and runs on 20% with a 20/4 light cycle. PPfd/DLi values determined with the Photone app are between: PPfd = 170-200 DLi = 12.3-14.4. The temperature is 21,5 degrees Celsius and the humidity is 60%. -21.06.24 I have decided to carefully transplant the seeds into fabric pots before they germinate. The Ppfd/DLi values as well as the temperature and humidity are unchanged. -25.06.24 The last few days I have only made sure that the soil is moist. So far, two of the three seeds have germinated and are forming their first leaves. The little plants were watered today with 60ml of water. The Ppfd/DLi values as well as the temperature and humidity are unchanged. -26.06.2024 Today is the last day of the first week, tomorrow marks the start of the second week and the first week of the vegetative phase. So far two of the three seeds have been successful. One Mango Smile has not germinated yet but I will keep it in the box and observe. Overall, things are going quite well so far. The soil was only sprayed with water as it still felt slightly damp under the surface.
Likes
17
Share
Ahora que ya tiene una buena estructura comenzamos a aplicar lst vamos a seguir esperando que la planta se siga desarrollando y cuando este mas grande pasaremos a floracion
Likes
5
Share
@AustinRon
Follow
TH 1Q2025 - Week 2 - Seedling 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ __ Fri Mar 14, 2025 TH 1Q25 15:V:2:1 __ Sat Mar 15, 2025 TH 1Q25 16:V:2:2 - Moderate Fertigation, Root Biased, Reducing Container Moisture Levels - LightIntensity: [ 414, µMol/m2/s] SIDE NOTE: We’re Still 14% Moisture Content on Orange Gasm #1 AM Watering with PCAL1660, Kelpak, CalMag Fuel, Lush Green - Starting with 1L PCAL1660 (@ 1g/gal) - Add 1 ml Kelpak/L - Cal Mag Fuel: 3.4 ml/L - Lush Green: 1.7 ml/L - EC: 0.9 (Delivered) Sex Tests Returned, Selected 8 for grow, w/ Priority to - Sex - Root Development - Seedling Size Final Selection: 3,4,7,6,8,9,11,12   __ Sun Mar 16, 2025 TH 1Q25 17:V:2:3 Pots Hefty - #4 looking, meh. (Reduce Light from 75 - 67%) Disassembled airpots for culled plants. Notes: - Overall - HIGHER Moisture than ideal - I’ll say it’s evidenced by sparse root development (Roots White, Top to Bottom - Roots throughout, but SPARSE - Action: Need to keep OVERALL moisture content at a lower level - Perhaps aided by REDUCED PEAT PARTICLES in coco - Fine Peat leads to Coco clumping. When it Clumps, it’s time to be washed,. Mix 1 Liter PCAL1660: [ 0.35, g] CalMag Fuel: [ 4, ml] Lush Green: [ 1, ml]  __ Mon Mar 17, 2025 TH 1Q25 18:V:2:4   Girls are displaying the funk of SMALL container = BUT - We just need some air . . . Evening Foliar, 1 Pt - [x] Solar Rain: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] Drowned Rats   __ Tue Mar 18, 2025 TH 1Q25 19:V:2:5 With Grow room doors closed last night, we hit max Temp and lost ability to hold RH, Resulting in VPD: 0.96 - 1.27. Opened doors ~0900, reduced max to 82, humidity back up, VPD back down. We’re at the “I NEED NEW SHOES” stage - SOP - Prep 1L Propagation Cells - Assemble PCells - Load with FRESHLY PREPARED Coco (Fresh, Unused) [NO FINE PEAT] - Assure Sides are Taughtly packed, not Tightly packed Evening: - Fertigate Balance of EC: 1.0 PCAL, KelPak, Cal Mag Fuel, Lush Green, PSP, Quillaja 60 Powder Fertigation Periphery, 1 pt PCAL 1660: [ 0.25, g] KelPak: [ 1, ml] CalMag Fuel: [ 3.4, ml] Lush Green: [ 1.7, ml] __ Wed Mar 19, 2025 TH 1Q25 20:V:2:6  Girls need to look happy, even colored, lifted leaves, BEFORE Transplant and Flip. Starting Standard Feed Regime at EC: 1.0 mS/cm __ Thu Mar 20, 2025 TH 1Q25 21:V:2:7 We’ll water to runoff this morning - 8:6:4:5:4
Bumping CaMg, Bumping N Watered entire Liter over 8 Plants, ~ 125 ml/plant With LOWER Light, Girls are MUCH HAPPIER. ALL PCells display ROOT MATS at bottom of airpot. We need to BALANCE THE GREEN across the plants, before Transplant. A day or two, or three of a more relaxed environment should better prepare us for transplant.  We’re gonna need more water than we’ve harvested. - [x] 8 Gallons of Distilled Water For Transplant Consider P/K ≥ 2.5 (Root BIAS)
Likes
16
Share
-Starting to sugar up and pistil structures getting vigor pretty fast! -Stretch was moderate, remained very active with the defoliation during -Planning to harvest the Blackcherry Sherb clone & move in a Unicorn Poop x Purple Gelato freebie I got from NASC. Check out my Blackcherry Sherb diary for pics and videos of the pheno I found (:
Likes
283
Share
D28 - The first day in the fourth week of veg for Nordle #2 and the start of the third week for #1. I gave both girls around 2.5-liters of the compost tea I started brewing yesterday, and for once, I remembered to check the pH and adjust it to 6.5. Yay, progress! D29 - Today, it was finally time to top the second girl. She was already seven nodes tall, around 30 cm. First, I got everything together as I prefer to have what I need before starting instead of running around looking for something mid-process: Snips, a couple of glasses with water to put cuttings in, bonsai wire and soil staples, clone-gel and a new razor blade, dwc cloner, peppermint oil and Q-tip. After cleaning the snips thoroughly with alcohol, I topped her just above her fourth node. I'm going to mainline her, so I removed everything below the fourth as well. She went from a lush lady to a stick figure! I secured her remaining two branches using staples and wire. The final touch in the tent was to put some peppermint oil on a Q-tip. Bugs and pests are attracted to the scent of injured plants. On the other hand, they hate the smell of peppermint oil, and it should deter the critters even though the girl smells like a buffet. I bought this tiny DWC system for a few bucks off Amazon a while back and want to try it as a cloner. (The primary purpose of this cloning project is to practice taking clones, plus see how well this hydro system works.) I trimmed each cutting before lightly scraping the stalk, making a fresh cut with the razor blade, and finally into a net-pot. I had planned to put some clone-gel into the water, but it turned out that the bottle had gone bad since last time. Oh well, pure water for this test run then. Finally, I cut up all the removed leaves and stalks into small pieces and distributed them on top of the soil in the pot. Have to keep that nutrition cycle going. Plus, like this, I don't have to worry about safely disposing those telltale leaves. Win-win in my book. D34 - The final day in the fourth week of veg for Nordle #2 and the end of the third week for #1. #2 has recovered great after her first topping, and I'm planning on doing her second topping tomorrow, six days after the first. #1 is a week behind so I'm planning on topping her in a couple of days as I want to make sure that her fourth node is at the same height as the fourth node on the second girl. The clones are looking really healthy but no roots yet but maybe that is to be expected considering that I'm using no rooting hormones.
Likes
143
Share
@SwissKush
Follow
Day 64 - flowers are so nice! - 201 watts of light a. the buds are covered in frost, this week will begin the Ripen b. added 5L of fresh spring water, ppms 900ppm, she likes 800-1100 ppm c. PH in DWC has been yellow the entire grow with hints the slightest hints of green from time to time, 6.0-6.1. d. uploaded video of grow e. like Pineapple Express, this plant will harvest a bit earlier than most of mine. pistils are turning colors fast. f. trichomes are very milky, still some clear, no amber yet Day 65 a. replaced the 5L gone in the DWC with fresh spring water b. will gradually take PPMs down closer to the 700 range for the ripening phase, tamping down with spring water for a week c. DWC has plenty of nutrients in it. d. the buds are incredibly sticky. Day 66 a. doing very well, the smell is very inenst, my carbon filter is not powerful enough to filter the smell... good thing I like the smell b. 4L gone from the DWC overnight, added more spring water, ppms down to 840 to get ready for Ripen tomorrow at 800ppm, probably 10 days or so. c. the trichomes are very milky, but there are plenty of clears still present. The pistils are turning nice colors, and no new pistils are forming! Day 67 - Ripening Day 1 - only TA Final Part (GHE Ripen) 5ml/L a. Started TA Final Part (GHE Ripen) at PH 6.0, 800ppm, she is loving it, consumed 4L overnight of Ripen solution b. I will keep the Ripen between 700 and 900ppm for the next week or more. c. The trichomes are filling fast, no ambers yet.. The buds are noticeably swelling Day 68 - Ripening Day 2 a. she is consuming 5L a day of ripening solution b. the buds are becoming noticeably larger, thanks Ripen you always work well! c. adding spring water to the DWC to top up and keep ppms between 600-800. Day 69 - Ripening Day 3 a. 4.5L gone overnight from the DWC, will top up with Ripen solution to keep ppms 600-800 b. the resin is very sticky and smells amazing, rubbing a sugar leaf and the fingers stick together Day 70 - Ripening Day 4 a. 5L gone from the DWC, topped it up with 1/2 strength ripen, ppms 800 b. the smell has overtaken the internal carbon filter and is coming out into the grow room c. she will be finishing up next week
Likes
18
Share
Hey fellow green thumbs! 🌿💚 It’s harvest time for our Auto Fat Pete’s Cookies from Super Sativa Seed Club! After an exciting journey, we’re thrilled to share the details of this unique plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our Auto Fat Pete’s Cookies was harvested yesterday. While the flowers turned out less dense than expected, the amazing smell has us super curious about the final product. 🌿🌸 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Fat Pete’s Cookies: • Bud Structure: The buds are not as dense as we’d hoped, but they are still sticky and resinous, showcasing a beautiful array of green hues with hints of purple and orange pistils. • Aroma: The aroma is incredibly strong and delightful, filling the grow room with a sweet, cookie-like scent that hints at the strain’s name. 🌿🍪 • Trichomes: A generous layer of trichomes covers the buds, promising a flavorful and aromatic final product. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Fat Pete’s Cookies: • Characteristics: Known for its sweet and cookie-like aroma, this strain has shown remarkable aromatic qualities throughout the grow. Despite the less dense flowers, the strong scent and generous trichome coverage promise a high-quality final product. • Harvest Expectations: Sweet, aromatic buds with a rich flavor profile. The slower drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ The aroma of a cannabis plant can be a strong indicator of its final flavor profile. Strains like Auto Fat Pete’s Cookies, with their unique and strong scents, often translate these aromas into delicious, flavorful buds. For a detailed grow guide and to see this strain in action, head over to my YouTube channel! 🎥✨ I share tips, tricks, and in-depth reviews to help you get the best results from your grow. This week’s harvest has been particularly intriguing, and I’ll be explaining the reasons behind the less dense flowers in detail. 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Fat Pete’s Cookies at Day 75 has been an interesting and rewarding experience. While the buds are not as dense as we hoped, the strong aroma and generous trichome coverage give us high hopes for the final product. With the plant now drying, we’re eagerly awaiting the final outcome. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a sweet and aromatic harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #FatPetesCookies #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT7-DOGDOCTROSO 17% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off
Likes
6
Share
Start of week 7! Week 6 went really well. The Blue Dream has show the most signs of nute deficiency, but it hasn't gotten any worse. She's also very sticky, with dense buds that are starting to fatten up. This lady is on an 8 week schedule, removed big bud and added overdrive to the nute lineup.
Likes
21
Share
She's stretching like crazy..... starting to drink water like they do about this time.. experiment trying a little of everything come with this one .....Scrog Defoliation HST LST Top Fim
Likes
29
Share
@Lazuli
Follow
Nice smell already The frost is insane this earlyyyy Mid week: the frost and smell is going crazy never seen this before
Likes
10
Share
The growth is amazing this week i killed some aphids and fed her some fish fertilizer and bat guano…flowers should be coming in this week. This would be a smokable plant for sure not seeds producing.
Likes
4
Share
Starting to come on nicely apart from air pressure issues in the tent since installing a cooltube
Likes
6
Share
Processing
Likes
8
Share
Que pasa familia, ya estamos de nuevo y actualizamos la segunda semana 😘 La verdad que están creciendo bien pronto tendremos que trasplantar para corregir la altura. El Ph Lo tenemos controlado en 6.2 y poco a poco van tirando. Todavía no echamos nada de productos Pronto bajaremos la altura del foco también. Esta variedad de @zambezaseeds no pinta mal familia 🙈