Likes
Comments
Share
4/17/2023 - Day 50 Flower: Start to week 8. Everything is still progressing as expected with no problems. Plan to go an extra day or two between watering to cause some extra stress in hopes of resulting in better tricome and terpene production. Not sure if this actually makes a difference, but why not try. 4/19/2023 - Day 52 Flower: finally watered for the first time this week. This will likely be my last watering using the majority of the supplements I've been using. Will be water with a small amount of coconut powder from here on out. Also plan to start dropping the light intensity next week. Today I watered 4 gallons again and made another sprouted seed tea. Mixed in Jay Plantspeaker Quillaja, Rootwise Bio-Phos and Bio-Catalyst, BuildASoil Big 6 Micro Nutrients and BuildABloom. 4/20/2023 - Day 53: Happy 4/20!!!! 4/22/2023 - Day 55 Flower: watered today with about 3 gallons of water mixed with Coconut Powder and 2 gallons with molasses. Also, dropped the light intensity from full power down to level 8. The tallest colas are still only about 8 inches from the light, so my average DLI is still in the 40's. Want to bring this down a bit more in the next week or two.
Processing
Likes
6
Share
@Moss420
Follow
Added the first screen into the tent. Decided to kick Big Mumma out because she just wasn't growing any taller and the other plants were really over growing her. For the new setup I used kitty litter trays and mesh to sit the plants on - each plant gets its own tray so I can track runoff EC individually and I cut little flaps in the mesh so I can wet vac the runoff. With this setup I shouldn't need to move the plants out of the tent until harvest. For the scrog I just tied some builders rope around the poles of the tent and tied the trellis netting off with training wire. I've been manipulating the growth just to try and fill out the whole screen, I also gave them a good haircut because I plan on flipping them soon, don't want them to outgrow the tent.
Likes
5
Share
@zenderman
Follow
9/4/26-50 days from shedding the shell .first day of week 8.
Likes
2
Share
@Ninjabuds
Follow
The Bubble OG plants are looking really good. They're all pretty big and have a similar structure. It'll be fun to see how they develop their own personalities as they keep growing. Well, another year has come and gone. Yesterday was New Year's Eve, and I want to wish all of you a happy and healthy 2025. May this year bring you all the things you've been wishing for. Let's make this the best year yet!
Likes
18
Share
Likes
6
Share
Gave a nutrient boost and set to 12 hr. Still doing LST but I will probably unleash once it actually starts flowering. Been a bit lazy with defoliation but that can wait until flowering as well. I think it will be due for cal mag and some flower nutes in the near future.
Likes
4
Share
So I’m making my nurturers then diluting down to my desired ppm be careful using these nutrients at full strength with autos! Test and tried will burn and tox your plant! I transplanted into one gallon pots the last day of week two May 6th,2023. They seem to have taken very well to the transplant. 🤞🤞🤞
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Likes
11
Share
🌱 Week 3 – Gorilla Cookies Auto Pheno Hunt Another week down and the differences between the phenos are becoming more obvious every day 👀🔥 The environment stayed very stable this week with temperatures, humidity, and VPD remaining consistent. Because all plants are growing under the exact same conditions, it’s really interesting to see how differently each phenotype develops genetically. 📈 Current observations: Several phenos are already reaching close to 30 cm in height Meanwhile, some smaller phenos — especially Pheno #6 — are still around 13 cm Leaf structure and overall plant shape continue to vary a lot between phenos Growth vigor is clearly different from plant to plant now 💧 Feeding & maintenance: This week the plants received their first proper feeding with around 4 liters of nutrient water. Some phenos seem to react more sensitively to the nutrients, as a few plants are starting to show slight brown leaf tips, so I’ll keep a close eye on them over the next days 👀 I also removed more large fan leaves to improve light penetration and allow the lower branches to develop more evenly. 📊 Current environment: Temperature stable around 26°C Humidity staying between 63–65% VPD maintained around 1.3 kPa Light intensity remaining at 35% Now I’m really curious to see when the first flowering signs will appear 🌸🔥 💬 Which pheno would you pick so far?
Likes
11
Share
@RadDad
Follow
I originally had applied to Green House Seed Co.'s Taste of the USA Contest here on Grow Diaries. Turns out I was ineligible but the good folks at GHS still had the big hearts to send me seeds anyway. So big ups to them for hooking this grower up. Welcome to the Sea of Fire 🔥 For this grow were using the Dark Phoenix seeds that GHS sent to me to create a Sea of Green. I've got 8 plants in 8 1L pots. I've decided to use Black Swallow's living soil for this grow so we won't need to add anything but water for the first 3 weeks or so. Our goal for this grow is to have these girls ready for harvest in about 20 weeks which will bring us to the beginning of November 2021. If all goes according to plan these firey buds should be filling my friends stockings this Christmas.
Likes
Comments
Share
Likes
9
Share
@Kindbot
Follow
The second plant did not respond nearly as well to some drought stress tests. We use it for comparison. Consider this an experiment in stunted growth due to damage in early veg.
Likes
39
Share
Installed UVA, set it to 7h a day Defoiled a little...plants are not in a perfect condition so i didn't remove much.. Buds are still forming greatly! Found some herms on 1 plant...removed them and will keep a closer look every 2 days now...
Likes
265
Share
Grow Report Week 11: The Continuation of the Flowering Phase Hello dear grow community, We are now in the second week of the flowering phase, and the developments are exciting. All the ladies have stretched further and received their final lollipopping today. A little defoliation was also carried out to direct more light onto the tops. The Frosty Nightmare Challenge At the beginning of the week, there was a small problem with the Frosty Nightmare, but it seems not to be spreading further and was removed. I am relieved that we have it under control. Space Filling, Temperature Control, and Fertilization Scheme The area to be illuminated is now completely filled. The temperatures remain constant at 25°C during the day and 22°C at night. Relative humidity below 50 percent. The Biobizz fertilization scheme is still being followed 100%, although I have raised the pH value a bit to support the Cal/Mag uptake. Bud Development and Anticipation I am satisfied with all the plants; their bud development is promising. The next 2-3 weeks will surely be very interesting. Banana, Do-Si-Dos, Gorilla Zkittlez, Frosty Nightmare, Pink Rozay, and Girl Scout Cookies can now show what they are made of. I look forward to sharing the progress with you. Thank you for stopping by, and see you next time! 😊
Processing
Likes
2
Share
I have been using eggshells and coffee grounds as fertilizer / it is indoors but i am growing out of a pot. I am trying to not use lamps (as I’m poor) or store bought fertilizer. Any suggestions or comments would be very helpful. The internode stems that are currently growing have odd shaped fingers / are not symmetrical. You can kind of see what I mean by the video. The leaves are wilting a little and are a little yellow ish. I have topped it and repotted in the last 11 days and it has looked healthy (no pests, no other abnormalities except for one leaf that came out a little screwed) since germination. Currently know it is a GG4 seedling/plant.
Likes
11
Share
The main issue with Gorilla Glue #4 is that the strain grows so fast, you need to prune your plants regularly. I had a light-stress issue in week 9, it stunted the growth of this one plant and it is taking approximately 1 more week to reach harvest stage. Great grow. will do again!
Processing
Likes
16
Share
@UK_Grows
Follow
Glass of water till they cracked after 24 hours then boop into soil.
Likes
8
Share
Hello Diary, The first week of flowering of the Milky Way is over. As you can see in the photos, the plant looks beautiful, the flowers have started to form, the branches are full of them and the shape of the plant is like a Christmas tree. Due to the large number of leaves, I remove a couple of extra leaves every week. Watering is a little more frequent, this week I added bio flowering booster with one watering. I don't always add supplements when watering, about once a week. The temperature at the Farm has risen slightly, around 28 degrees, which corresponds to the conditions outside, while the humidity is around 50%. Here is a quick overview of the week. 23/05/2023 - Day 24. Watering. I prepared 8 liters of water, lowered the pH. to 6.0 and added the first two components of the bio flowering booster. I watered all three plants on the farm with that amount. 27/05/2023 - Day 28. Watering and photography. This time I watered with clean water, I just lowered the p.H. 6.0. Milky Way F1 - 43 cm That's all for now, see you soon. And thank you all for your support.
Likes
2
Share
Week 4’s in the box and these plants are lightning quick outta veg. We’ve confirmed the presence of at least 3 males and 1 guaranteed female so far. They’ve all started to hit vegetative maturity in full stride so it won’t be long until we look to flip. A couple have been topped once more for the sake of additional colas and if we get lucky, the remaining females may be suitable for a scrog. Either way, can’t be much happier about how well they’re growing at this stage. Here’s hoping it remains so through flower🤞. ***Notes: strongest plant to this week is first confirmed female. Prob a prime candidate for cuts and back pollination with the F1 pollen dump.***
Likes
41
Share
They were very similar looking plants in early growth, but one of them stretched about 10 inches more than the other. It only weighed a few more grams despite the extra height. They require no special attention at all and produced fairly well, though I'd have liked a bigger yield. The buds are dense and smell amazing. Plant A: 87g Plant B: 94g Final thoughts: Potency: 8/10 Yield: 7/10 Aroma: 9/10 Flavor: 8/10 Bag-appeal: 8/10 Bud density: 8/10 Special thanks to Spliff Seeds for sponsoring this grow! These are some truly impressive genetics. Fat, frosty delicious buds that keep you high for hours! What more could you ask for!👈😁👍
Likes
1
Share
Das erste und letzte mal getoppt, angestrebt ind 6 Haupttriebe pro Pflanze. Gelato Kush macht mit Abstand den besten Eindruck.