Likes
22
Share
changed with spaceled light , good result , girls loved it
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
7
Share
@Moe_Mr_X
Follow
Tag 100 ist vollbracht und der 65.Blütetag ist erreicht. Die Lady ist bereit zur Ernte, denn alle Trichome sind milchig und etliche bernsteinfarbend, so wie ich es mag. Bin total zufrieden mit dem Ergebnis dieser Lady, so macht anbauen Spaß.
Likes
3
Share
La semana fué realmente bien 👍😌🙌 Esta semana sera la última con el ciclo 18/6 para empezar con un 12/12 y comenzar la floración la semana que viene 💪 Hemos estado aplicando durante todo el proceso 2ml de Terra Vega para la etapa vegetativa de la planta y comenzamos a darle Pure Zym de Plagron para que absorba odos los nutrientes posibles sin saturación 👌
Likes
22
Share
1/11/2024 Vegetation Week 1 Day 1- I have a root almost in the water.. Yay!! Top feeding is almost done. she is looking a little sad as I work the transition Top feeding but once the roots are fully in the water she will start to take off. Ensured my PPFD is set between 250-300 it is set to: 258 1/12/2024 Vegetation Week 1 Day 2- I have a root in the water.... NO TOP FEED TODAY SIR!!! now that a root is touching the water and she looks stable, I am not going to topfeed, I will see how she looks tomorrow and as long as everything looks good I am going to go ahead and do a change and week 1 fill on Nutes.. I know it is a couple of days in but the same Nutes go through Week 2 and get changed at Week 3 So I should be good to go.. I will just ensure I fill to root touching the water when I change tomorrow. 1/13/2024 Vegetation Week 1 Day 3- Water Change Day!! I added 36 Gallons of Water to the system: Silica= .5mil/gal= 18mil CalMag= .75mil/gal = 27mil FloraMicro=3.0mil/gal = 108mil FloraGro=2.0mil/gal = 72mil FloraBloom= 2.0mil/gal = 72mil PH DOWN= 30mil Very important thing with this system is to now wait the 24 hours for the system to adjust.. Do not make any further adjustments to your PH up or Down for 24 hours to allow time for the system to balance. 1/14/2024 Vegetation Week 1 Day 4- Today I just adjusted the PH to ensure that it was right at 6.0 1/15/2024 Vegetation Week 1 Day 5- Today I Cleaned up the lower damaged leaves from the transition from top feeding to roots in the water. She looks good today. 1/16/2024 Vegetation Week 1 Day 6- Today I just took a picture of the beautiful lady for Log. Other than that just normal day to day operations, check the pH, check the Humidifiers and fill as necessary, check level of water in the Res. Everything looks great. onto Tomorrow!! 1/17/2024 Vegetation Week 1 Day 7- Today I filled the humidifers, checked the PH and just let her grow.. Grow baby Grow.....
Likes
23
Share
The plant was harvested on the 73rd day. It was hung not as a whole plant but by separate bud sites. Bud sites had the larger fan leaves removed before the drying process. Temps for the drying were 62F 55%RH for 10 days. She then had a quick cleaning of sugar leaves and jarred for cure. Final report will be coming shortly.😍 Final report: (Smoke report not loading comments) After months cured in a jar I rolled up a joint and smoked it. It had a nice smooth smoke with the flavor of vanilla cake/cookie . She also had a hint of citrus. After the harvest was done I prepped the area for next year's outdoor grow. I will continue to prep the area for the next few months by adding goodies to the area to bring in the worms.😍
Likes
2
Share
Likes
7
Share
End of Week 6 of flower All seems ok Would have began flushing this week but not going to, she doesn't look ready for that
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D22/V18 - 07/05/24 ⚗️ EC: 0.7 pH: 5.3 🌡️ T: 22 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D23/V19 - 08/05/24 ⚗️ EC: 0.7 pH: 5.3 🌡️ T: 22 °C H: 50% 🌊 🍗 💧 💼 Topping and LST 🧠 🚀 🎬 1 TL video of grow and one of the topping ______________ 📅 D24/V20 - 09/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D25/V21 - 10/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 12 L 🍗 Calmag, Grow A-B, B52, Hydroguard, Rhino Skin, Bud Candy 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D26/V22 - 11/05/24 ⚗️ EC: 0.9 pH: 5.4 🌡️ T: 19 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬 1 TL video ______________ 📅 D27/V23 - 12/05/24 ⚗️ EC: 1.0 pH: 5.3 🌡️ T: 20°C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬 1 TL video ______________ 📅 D28/V24 - 13/05/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 20°C H: 50% 🌊 🍗 💧 💼 🧠 🚀 Out of Home 🎬
Likes
3
Share
@Bizbiz
Follow
I’m using the trolmaster controller and its working really well, you have an instant calculation of the Vpd and plants looks happier, for example with a perfect vpd during the night period plants will use more water and more nutrients so you can push the plants a little more than usual, next week I will start to use co2 for my first time.
Likes
22
Share
Hello everyone and welcome to week 9 and day 57 for these two Fast Buds Strawberry Bananana Autos. These two have gone mad! Beyonce is 81cm tall and well into flower as you can see. Solange on the other hand was 118cm tall and had passed the light so I super cropped her two tallest colas a few days ago. She is now 98cm Fertigated 10l 4 days ago and 7.5l today. Day 60: Fertigated 10l Day 62: The plants are now too big and/or heavy with bud to move out of the tent to photograph, and so with thanks to @growbigorgohome who suggested it, I have got a selfie stick to do in-tent photography. It's not great but it's better than nothing! Hopefully the videos will show plenty of details. Anyway I am starting to routine again now, the plants haven't gone more than 3 days without feeding, and I should be back to every other day again now. These two girls are really amazing. Beyonce is way ahead in terms of bud development, but Solange vegged longer and stretched more she was so massive I had to super-crop two colas! Anyway they are really motoring along now, I think Beyonce will be ready 2 weeks before Solange. Despite it is only day 62 we are rapidly approaching the end game here.
Likes
21
Share
@w33dhawk
Follow
Hi alle zusammen dies war die letzte vegi Woche puh! Wieder 10 Wochen ins Land gezogen die Zeit rennt auch 😰! Die Woche lief ganz gut bus auf Dienstag da wollte ich alles noch einmal nach justieren und da ist mir die lady die hinten rechts steht gerissen also das T von oben ein gerissen (gespalten) hat sie aber nicht sonderlich gestört hab sie so gut es geht fixiert (sollte auf den Bildern und dem video zu sehen sein werde es nächste woche nochmal genauer fotografieren) ist leider dadurch nicht alles unbedingt auf gleicher Höhe so 2 bis 3 cm höhen unterschied zu der kleinsten von den 4 octos aber naja habe Freitag abend nachdem das Licht aus ging den reflektor ausgebaut und einmal Grund gereinigt und wieder eingebaut danach das ganze von meiner Mh auf Ndl gewechselt. Die zeitschschalt Uhr habe ich auf 12/12 umgestellt ab jetzt geht es langsam Richtung heisse Phase 😁😂(ich freue mich schon auf den Duft und das geglitzer) euch allen ein schönes Wochenende mit viel Sonne 🌞🌞🌞🌞🌞🌞
Likes
26
Share
@THC123
Follow
Day 50 (August 5th): still just tucking branches. Hoping I get a good stretch here soon so I can fill this net up, defoliate and let her go! Day 52: the two plants look quite different in color. I think it’s the watering that’s causing this. I’m having trouble with a couple of the drippers on the right plant. We’ll get it sorted out. Day 53: when I switch the soil moisture meter back and forth, you can feel how dense this root system is! Definitely using 10 gallon pots next grow. Day 55: Did the last of the LST tonight. Time to let them be and get thick! Haha
Processing
Likes
20
Share
This girl is set on hold back on flowering This girl is going too be a beast
Likes
14
Share
EVERYTHING IS HARVESTED NOW AND TRIMMING LIKE A MANIAC. STAY TUNED FOR THE NEXT BIG GROW. THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
16
Share
@GrowerGaz
Follow
Just water till the end now , last feed was just water and Hesi boost .
Likes
30
Share
Can’t wait 🔥🌬️💨💨💨🍃🍃🍃🍃🍃🍃🍃🍃🍃