Likes
Comments
Share
Likes
70
Share
Ich warte 10 -12 Tag für netto gram.
Likes
5
Share
@RockDa420
Follow
Day 29 Wed 12/14/22-Watered today and FIMed plant 3, so now plant 1 has been topped and is getting LST and plant 3 has been FIMed. Plan2 has only been pruned, so now I'll be able to see the difference of these 3 methods. Day 30 Thurs 12/15/22-Just watered today. Day 31 Fri 12/16/22-Feeding day. Added .5 tsp recharge & 4 ml cal-mag to 1 gal water, reduced pH to 6.2, then divided equally, with one quart for each plant, watering-in 1.5 tsp Dr Earth fertilizer mixed with 1/3 c worm castings and 1 c coco coir. Day 32 Sat 12/17/22-Auto watered today with globes because we were out of town for Christmas with my family. Day 33 Sun 12/18/22-Just watered today and did some pruning close to the main stem on lower branches. Day 34 Mon 12/19/22-Just watered today Day 35 Tues 12/20/22-Just watered today
Likes
3
Share
@123Grow
Follow
114 Days left as of 11/6. Disclaimer: 56 days left to veg. Which ever plant is 3 ft or taller in 56 days will be flipped. In 1 week, I will be transplanting into 3 gallon containers that leaves 49 days. When there are 2 weeks left, I choose which ones go into the 5 gallon containers for flowering. After the transplant recovery, I do heavy defoliation and lollipopping. Wait 1 week to recover, and flip time…..Which just so happens to be: New Years!!! This week ( and past few days) has been on target. I am seeing growth everyday I open the tent. I don’t know why, but the first 2 weeks of my grows move super slow. Then in week 3-4, it’s like a rocket ship. 11-11 (51 days left) - kicking some ass now. 2 of the RuntZ might make it, the Hulk-Berry is def going to make it pretty close to 3 ft tall. Hulkberry has 21 days to be transplanted, RuntZ will be transplanted in 14 days.
Likes
2
Share
@MephodMan
Follow
Topped to 4th node. Started brewing ~5l of neem/kelp/aloe Trying out LST clips for the first time. Added a couple of small LST clips on the 4 largest fan leaves. One of the large lower fan leaves snapped off this morning when I was adjusting the LST clips. It looked like it had already snapped yesterday. Adjusted VPD to lower humidity
Likes
Comments
Share
I have had to bend over quite a few far reaching branches with this sativa girl. It's funny, I used to worry about bending and breaking a branch. 8/23 they just keep stacking Jesus chroist. 8/24 sensizym, budcandy, microbes feed. Kiyomi ecs are way high at 7 in the res. I diluted the res half way with tap and the chocs are still eating big time they're at 3.5ec or so. Think I'll just cut feed to the kiyomi at this point. 8/27 been feeding an ph perfect at .8 ec, got everyone down to around 3.0. I think I'll continue with this feed and observe runoff. Once I get around 2 I may give another salt feed depending on what week I'm at. I don't think the kiyomi is going to need another.
Likes
41
Share
🌸 Flowering Week 5 🌸 The transition into mid-flowering is well underway, and the plants are responding beautifully. Bud sites are stacking across the canopy, while resin production continues to increase day by day. Trichomes are now clearly covering the flowers and surrounding sugar leaves, giving the plants a frosty appearance much earlier than expected. White pistils remain dominant, showing that flower development is still actively progressing. The structure remains healthy and vigorous, with excellent color, strong branching, and consistent growth throughout the canopy. Environmental conditions have remained stable, allowing the plants to focus their energy on flower formation and resin production. Aroma intensity is increasing steadily, bringing more complexity and character to the garden each day. The next few weeks will be focused on bud swelling, terpene development, and maximizing flower density as we move closer to the final stages of bloom. Genetics: Hokuzan (World Breeders) 🌍 Breeder: Hidden Group
Likes
24
Share
@Spazmagi
Follow
12/1 - Moving right along! Today is December 1st, Day 1 of week 9, or D63. Buds are finally starting to swell. Looking forward to seeing how they ripen over the next few weeks. Not sure how long she will last, but she still has a ways to go. This is always the hardest, but most exciting part! There are dozens of buds that are already super sticky, and if my last grow is any indication, it's only going to get better. Not sure what yield will be as this is a shared space, but I'm hoping to hit 100g from this plant. That would give me roughly 1.5gpw when counting via square footage/canopy space (270w/4plants = 67.5w/plant. 100g/67.5w = 1.48gpw). 12/5 - Uploaded video from 12/4 Thanks for stopping by the garden, and, as always, Happy Growing!
Likes
3
Share
I can’t believe how big it’s become !! 😍
Likes
2
Share
Week went smoothly cant complain....cutting are doing well also took 4 cutting of seed(think it's from applelicious) they already rooted n transplanted going to veg for a lil n send to flower to see if it's worth
Processing
Likes
4
Share
My o my, what can I say... These ladies are gorgeous! Along with adding in the 2000W along side my 600W, I cut out the grow solution in my nutes contrary to the instructions and my ladies are booming! We'll see how the rest of the week continues! I started a majority bloom with some added glucose for my feed to help with bud weight but they are really packing on. Hopefully next week will be my last week of feeding as trichrome production increases and I can start my 2 week flush!
Likes
7
Share
@vertex8
Follow
Start of week 4 and the washing machine looking great, got the scrogg net laid down and will be just tucking branches back under the net. After digging out the Jaffa plants which were not growing at all we realised that they came in soil not coco, after cleaning off the soil and treating with super thrive and great white, giving them a new mix of Coco and some food at 1.0ec they begin to show signs of life 🙌 Hopefully they catch-up with the washing machine. Not seeing any major signs of deficiency or toxicity atm
Processing
Likes
21
Share
Day 48 - 11/11/19 started this week early by accident. Plant smells like tropical cheese and i cant see the stalk anymore except from the leaves, very bushy and seems to be in a mid stage of flowering. buds are getting bigger by the looks of it. very sticky also! Ive been removing about 2 leaves per day from this one, started with a couple touching the soil and removed a few higher ones today to expose the buds to more light and fresh air. when looking at this plant side on the main cola looks huge and growing more every day. im assuming this is about 2 weeks away from harvest so il probs flush next week. roll on harvest time! other than that the humidity has went up to 50-55 the odd time when watering all the plants. it doesnt stay high long with the heat from the lights so it should be fine. Day 51 - 14/11/19 Still removing the odd couple of leaves every day to let the fresh air get near the main cola, i still cant see it very well but it looks like what a 6-7g bud looks like when its dried aha. the smell can be described as if someone took a cheese strain and added something powerful and herbal/tropical to it. cant wait to order my jewelers loupe in a few days to see where im really at :) and i added a video to show the plant looking all frosty. a few weeks to go now!
Processing
Likes
41
Share
Been wanting to try out this auto ghost og from original sensible seeds for a while and finally got the opportunity to get one wet. I originally started this setup to compete in the solo cup challenge, but I needed something that will be minimal maintainence and doesn't require hand watering. So this is what I ended up with. I will not be entering since I know it will bring controversy, but I am going to follow the rules and treat this grow as if I am competing. I didn't want to use regular solo cups because last time I had a lot of algae growing in the root zone when I harvested. I opted to use a black light proof cup. These cups were 27 oz originally so I filled them with 16 oz of water, marked the level, then cut them down to 16 oz. I set the drain pipes about an inch from the bottom so they have a little reserve if I have pump or power issues. I know people will see the drains as a way for roots to grow out of the cup but in reality I have to keep the entire pipe free of roots or it will clog and overflow. So I am actually losing a little volume due to this. I filled the bottom inch or so of the cups with river gravel to stop the perlite from washing into the reservoir. I am running a 5 gallon reservoir with a small air pump and the plants will be getting irritated 24 hours a day from an aquarium power head pump. I set the system up to be totally self contained and easily portable. It was all built from things I had laying around other than 97¢ for the cups. I will be keeping the feed simple as always feeding maxigro and maxibloom with a couple flower boosters.
Likes
10
Share
Week 1 Flower (2/28/22 - 3/06/22) Switched to flower on 3/01/22
Likes
27
Share
Day 49. Those buds are now really starting to swell up. They also produce a very lovely smell🤩 A few days ago I also changed the light colour from blue and red to only red. We'll see how the buds will react to that.
Likes
5
Share
Here our Gush Mintz are starting to give their best. In this diary you will find the plant worked with the techniques in this case the first topping was done, we cleaned everything else creating the Mainfold and we are going to work everything with the main lining. We are at the first topping and we have two mini branches growing. The other one you will find in the diary next worked without the application of techniques that involve cuts to preserve its speed. Comparison is the salt of experience. We have started the Plagron fertilization program, we are in 100% organic configuration, the soil is recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhiza Mix (4gr in the mix, 1 gr under the small fiber pot). We are administering // 1 ml/l of Power Roots - 1 ml/l of Pure Zym - 1 ml/l of Sugar Royal - 3 ml/l of Alga Grow I have doubts about the compatibility of Pure Zym with mycorrhizae. If in doubt, ask the experts, do not mix too much at random. https://plagron.com/en The doubts about the compatibility Pure Zym / Mycorrhizae have been dispelled, they can go well together according to Plagron experts. If someone tells you that enzymes eat mycorrhizae, which in principle may seem possible, explain to them that it is not true. https://www.royalqueenseeds.it/growing/452-easy-roots-mix-di-micorrhize.html Try this strain, it's a top strain of the last few years very high thc level ---- https://www.zamnesia.io/it/11234-zamnesia-seeds-gush-mintz-automatic.html Brief description of Zamnesia // Gush Mintz Auto is a relaxing hybrid strain that derives from the original Gush Mintz and a high-performance ruderalis specimen. This cross produced a plant with 70% indica and 30% sativa genetics. Her parents have given her a range of interesting traits, including mint and candy flavors and a high THC content of 20%. Smoking these buds provides creative vibes, a sense of euphoria and a pleasant sensation from head to toe. In addition to its enticing flavors and powerful effects, Gush Mintz Auto produces large yields of compact buds in just 9–10 weeks from germination. Gush Mintz Auto is extremely easy to grow, with plants reaching an average height of 70cm indoors and 120cm outdoors, making her ideal for discreet grows or limited spaces both indoors and outdoors. This strain is well suited to LST (Low Stress Training) and performs best in a ScrOG setup (a technique that optimizes light exposure to maximize yields). Punching aromas and deeply relaxing effects As she grows, Gush Mintz Auto's aroma intensifies, releasing sweet and minty notes. This refreshing flavor profile really comes into its own when smoked, offering an inviting combination of minty freshness and sweetness. The effects are deeply relaxing, enveloping the body in a pleasant well-being without being too sedative. Gush Mintz Auto is perfect for those seeking creative inspiration, making writing, painting or music-making sessions smoother and more inspiring. You can find the whole world of growing on Zamnesia and more, just check out the site and you will find "all the best that nature has to offer" in various shapes and colours. The new strains are fantastic and the old ones are no exception... p.s. no hermaphrodites so far, can you growers say the same? ---- // www.zamnesia.com
Likes
2
Share
Semaine 6 – Transition Floraison : Pistils et Défis Nutritionnels Jour 35–41 (17 avril – 23 mai) La semaine 6 marque officiellement l’entrée en floraison. Gorilla Cookies a ouvert le bal avec ses premiers pistils la semaine passée, suivie par Toof Decay. Les autres génétiques (Mephisto’s Wedding, Hubbabubbasmelloscope) montrent des signes avant-coureurs de floraison. L’environnement reste stable : 24–25°C, RH 62–64%, VPD 1.17–1.21 kPa, conditions proches de l’idéal. Nutrition et PPM Transition vers Bud Ignitor (1 ml/L) et maintien du GMB 1:1:1 à 1.5 ml/L. Cal/Mag augmenté à 2 ml/L. = ~570–610 ppm réels. Problèmes identifiés Carence en Cal/Mag sur Hubbabubbasmelloscope et Gorilla Cookies (chlorose interveinal, feuillage jaune). Traitement direct : 2–3 ml/L Cal/Mag appliqué par pot. Réaction positive après 3–4 jours. Observation critique : les 4 plants en AutoPot (AQUAValve 5.0) montrent 2x moins de vigueur que les 3 plants en bases AC Infinity avec les pots en tissus. Hypothèse : le système AQUAValve maintient le substrat trop humide en continu, tandis que les bases AC Infinity crée une meilleure oxygénation. Aussi, c'est seulement sur les auto pots que j'ai observé des carences, peut-être dû à un blocage nutritionnel. À évaluer pour les futures canopées. Lumière et PPFD IF500 (500w) + Mars Hydro 500w maintiennent 660–700 µmol. Pas de stress lumineux, feuillage bien coloré (sauf carence identifiée). Statut réservoir 47L, 15L pots coco 100%. Consommation d’eau stable. Changement complet prévu mi-floraison. Prochaine semaine : suivi de la carence corrigée, ajustement graduel du calendrier nutritionnel Advanced Nutrients pour la phase de développement floral. Tent: 4x8 Gorilla | AC Infinity 69 Pro + Pulse One | 20/4 | 7 plants autoflower | Jour 35 COMPTE RENDU TECHNIQUE — RUN INTÉRIEURE #1 2026 Problème AutoPot et Solution Date du diagnostic :24 mai 2026 (Jour 37) Système : AutoPot 4-pot, AQUAValve 5.0, réservoir 47L Génétiques affectées : Hubbabubbasmelloscope (1), Gorilla Cookies (1) PROBLÈME IDENTIFIÉ Symptômes observés - Décoloration inter-nervures (jaunissement) sur feuilles supérieures - Diagnostic initial : carence en calcium/magnésium (Cal/Mag) - Plantes : Hubbabubbasmelloscope #1 & #2, Gorilla Cookies Prélèvement d’eau au fond des pots AutoPot(jour 37) a révélé : - pH : 6.8(hors cible 5.8–6.2 pour coco) - Eau stagnante depuis activation AutoPot (jour 17 = 20 jours) Analyse de la stagnation 1. Timing AutoPot précoce→ Plantes jeunes, consommation faible 2. Eau restante dans les pots → Contact prolongé avec air dômes 3. Air dômes + coco neuve → Oxydation progressive, dérive pH vers alcalin 5. pH 6.8 en coco→ Blocage d’absorption de Cal/Mg (disponibilité réduite de 40–50%) Résultat : Symptômes de carence alors que les nutriments étaient présents = blocage nutritionnel, pas déficience réelle SOLUTION APPLIQUÉE Étape 1 : Correction immédiate (24 mai) - Prélèvement eau au fond des 4 pots AutoPot - Pompage progressif jusqu’à pH 5.8 - Volume pompé : ~1-2 L par pot (estimation) - Nouveau pH : 5.8 stabilisé Étape 2 : Traitement localisé (jours 20–24) - Application directe Cal/Mag : 2–3 ml/Lpar pot (non-réservoir) Top wathering - Appliqué sur : Hubbabubbasmelloscope Mephisto, Gorilla Cookies Fast Bud - Méthode : versement manuel aux racines - Fréquence : 2 applications espacées de 3–4 jours Étape 3 : Maintenance réservoir - PPM réservoir principal : maintenu 400–420 ppm (Hanna HI98301, scale 500) - Note calibration : Vrai PPM = lecture × 1.4 = ~560–588 ppm - Cal/Mag réservoir : maintenu à 2 ml/L - pH réservoir : vérification quotidienne post-correction Étape 4 : Surveillance continue - Routine hebdomadaire établie : Prélèvement fond pots, vérif pH - Objectif : Détecter remontée pH avant accumulation - Seuil intervention : pH 6.2 = pompage correctif RÉSULTATS & OBSERVATIONS Court terme (5–7 jours post-correction) - Pistillage accéléré visible sur Gorilla Cookies (confirmé jour 37) - Décoloration n’a pas progressé → blocage levé - Plants Mephisto’s Wedding : vigueur stable (10% affectés) - Toof Decay : vigueur stable (10% affectés) Comparaison système Observation importante : Plants en bases tissu AC Infinity (manual feed via bleed valve) montraient plus de vigueur que plants AutoPot - Raison probable : Cycle humide/sec régulier vs eau stationnaire - Implication : AutoPot inadapté pour timing de croissance lente initiale LEÇONS APPRISES Sur le système AutoPot 1. Activation tardive recommandée→ Jour 25–30, pas jour 17 1. Monitoring pH hebdo obligatoire → Coco + air dômes = dérive pH naturelle 1. Eau stagnante = problème→ Même avec nutriments corrects, pH alcalin = blocage Sur la coco neuve - Nécessite ajustement pH plus fréquent en début - Se stabilise après 3–4 semaines d’utilisation - Minéraux s’accumulent lentement → nettoyage hebdo bénéfique Choix système pour Run #3 AutoPot déclassé pour prochaines runs - Passage à : 8× bases AC Infinity + 8× flottes automatiques individuelles - Avantage : drainage régulier, pas de stagnation, PPM/pH plus stables - Setup réel : coco/Bio-Urbain, 5 gallons, 75L réservoir centralisé DONNÉES COMPLÈTES CONCLUSION Problème :Eau stagnante + pH alcalin = blocage nutritionnel (pas déficience) Solution : Correction pH + Cal/Mag localisé + routine hebdo de monitoring Statut : Résolu, plants en rétablissement, early flower progression normale Impact rendement : Minimal — correction avant dégâts sévères