Semana del 9 al 15 de septiembre 2024. Las Positronics auto aun no Entran a Floración, y ya van bastante avanzadas, mientras las otras, unas van muy flacas y otras si van bastante gordillas.

Very healthy plant. No signs of deficieny.

🌱Day 50.💚 🌱Day 52.💚 🌱Day 54.💚 🌱Day 56.💚 Keep watering with ph balanced, plain water.

First week of florwering is over. They all already show pistills so induction was successful. I did a little defoliation to uncover bud sites and LST-d Strawberry Cough since it was much higher than the rest of the ladies. Now I do have even-ish canopy. CA$H and Mimozz are going superb. Cough is okay, not great, not bad. Grandpa's Cookies is a runt but I'll try to have at least some weed from this one also 💪

The first 2 Blackberry’s are stretching and developing bud sites. These 2 are a bit small, but the purple in number 1 is coming in nicely. I think the 3rd will be the champion of the bunch and outgrow her big sisters. My fault for trying to get a head start by a few weeks on the first 2 in less than ideal conditions. Live and learn. I’m going to keep all plants growing so everyone can see the good, the bad and the ugly. (I bet the ugly still gets me high as fuck!) 😜 New tents coming soon too. Another 2x4 and a 4x8. 👍

So far so good till now,i Just spotted a leaf that Tells a Little potassium deficiency(solved,Just a temporary deficiency). Topped and FIMmed one,still keep going. I bit stressed plants by the lights and i decided to remove scrog net for Better inspecting and rotate plants,definitely not good for autoflower plants. This week i watered 1 litre Every 2 days.

The chiclé bubble is getting big! Trimmed her Back this evening. Think this will be a momma and will be pulling clones. What do you guys think? How many of you run tight cycles? Mothers clones 3 month rotation is whay I currently have set up.

TUESDAY 7/23: The FIM'ing seems to have only doubled her main, but that's okay. She's going from Hawaii conditions to Arizona conditions every day...8-10 hour of 72f/70+%RH to 12-14 hours of 96f/35%RH and taking it like a champ. I foliar fed her after taking her outside today and started training her a little bit. Gonna try to get those tiny lower branches to think they have a shot at "primary cola" status. I had no wire with me, so I just used a pliable length of dead-ish vine that was lying on the ground. I'll use some wire and binder clips when I can find it.. Evening...same day: She broke the vine I was using to hold her down, so I dug around and found some clips and wire. WEDNESDAY: She was just about 4 inches beneath 120w of LED last night with tons of blue spectra, 69f temperature and 80% RH. Those lower branches gained another half inch each and the top colas have turned to face the sun. I foliar fed her and gave her a little douche of Bactrex this morning when I took her outside. Had a cool front come through today, so the high will just be 87f and it's dropping to the mid to low 60's tonight..hooray! They're forecasting another day or two like this before the return to "oven-like" conditions.👍 I carried my pole saw down to the site at daybreak and removed a few smaller branches above them and to the West. I'll see if it is allowing some evening sun to reach her when I go down there to fetch her home to the LED's for the evening. THURSDAY: I was somewhat successful with getting a little bit more direct sunlight to her while outside during the day..about another 20-25 extra minutes. She got a sip of compost tea today with a little kelp me kelp you and big bloom. I tweaked her indoor domain a bit..she's now got 2 x 12w Miracle LED veg bulbs (cool white with 475nm peak), 1 x 75w cool white/460nm 225LED panel, 1 x 40w Sansi daylight grow bulb, 1 x 50w 460nm/cool white flood, and 1 x 18w 18" pinkish grow light bar. None of the lights are more than 5 inches from her, so she's incredibly well lit. I'm estimating that it's about 5,000 micromoles an hour, but I'm keeping the temp at her canopy under 80f with 90+% RH. It's not direct sunlight, but I think she's happy. I'm still undecided as to whether I'll keep her on a 24/0 schedule or if I'll cut it back to 20/4 when she starts flowering. Since I can provide her with a cool and humid environment for a third of the day, I'm leaning towards running 24/0 the whole grow. FRIDAY: I accidentally burnt her up a little bit today..one of the overhead LED's slipped and was about an inch from her top leaves...oops..I put her outside and misted her with some boom boom spray and kelp me kelp you.. SATURDAY: She's got a few crispy leaves, but she perked up and is growing again...whew...😓 SUNDAY: I tweaked her indoor environment today. She's now got a 120w quantum board (3500k) overhead, a 24w panel with 225 x 660nm red LEDs, the 40w Sansi light, one 9w 2' bar grow light, and one 12w Miracle LED blue.

As you can see both plants exploded over the last 7 days and they stretched a lot during their first week in Flower.😎 😎💪 Lemon Cherry (left) now finally starts growing well and looking very healthy now. Papaya (right) ist procucing all the small sidebrnaches with buds, that i hoped for. 😍👏

coming into 3rd week in the pots. Everything is working just fine, Had a few minor PH / PPM issues without the Res Change, that had 0 visual effects on the plants as far as I can see Added PH Down , And ppm is around 1180-1220. I May have added too much nutes on the first run. Will try to get a more accurate Mixture in a few days. TOPPING Topped the 2 Wifi Zombie , and left the 2 others for now untill they catch up. Removed bottom leaves and branches , to let the tops fill in. Video posted shows where topping was made and the progression of the plants!

Constructive interference is the phenomenon where two waves combine to form a new wave with a larger amplitude. This occurs when the peaks of one wave align with the peaks of another, and troughs align with troughs, causing their amplitudes to add together. For example, if two identical waves meet, their amplitudes will combine to produce a resultant wave with double the original amplitude. Constructive interference is a fundamental phenomenon based on the universal laws of nature, specifically the principle of superposition. 👋Top is a clean cut, no confusion for the plant, road ahead is clear, by completely removing the main growth tip, the auxin source is eliminated. The plant permanently halts vertical growth from that main stem and immediately sends its energy and hormones to the two new, evenly spaced branches just below the cut. Fimming slightly different because a small tuft of the top growth is left behind, the auxin disruption is temporary and less severe. The plant recovers more quickly and sends its energy to multiple surrounding growth points, often creating four or more new shoots from the same spot. It will eventually regain some vertical dominance after a few weeks if left to its own devices, but with a little more LST, bending the apex to the same height as the rest of the internodes, this shatters dominance, hopefully creating around 8-9 main shoots growing at equal height once recovered and grown out. Reduced environmental intensity for now and let her focus on dealing with this new stress for a week or two. When H+ ions are added to soil, the first nutrient displaced from exchange sites is typically aluminum (Al3+), if it's present, followed by calcium (Ca2+), magnesium (Mg2+), and potassium (K+), because aluminum and these base cations have different binding strengths. The order of displacement depends on the lyotropic series, where ions with a higher positive charge and those with weaker binding strengths are displaced first. The specific order of nutrient displacement is determined by the lyotropic series, which ranks the strength with which cations are adsorbed by soil particles: Al3+: Most strongly adsorbed, so if present, it will be displaced by H+ ions, leading to increased solubility of aluminum and potential plant toxicity. Ca2+: Displaced next, as it is more strongly bound than Mg2+ or K+ but less than Al3+. Mg2+ and K+: Displaced after Ca2+. The displaced nutrients can be lost from the root zone through leaching, becoming unavailable to plants. As H+ ions increase, the proportion of acid cations (H+ and Al3+) on the exchange sites increases, while base cations (Ca2+, Mg2+, K+) decrease, resulting in a lower soil pH. The amount of photosynthesis (water splitting) directly determines the availability of H+ ions (protons) in a plant. 90% of water is for cooling of photosynthetic apparatus the other 10% is split for its H+ among others things. Carbon sugars, like glucose, do oxidize in soil through a process primarily driven by microorganisms, which break down these sugars for energy. This oxidation converts the sugars into carbon dioxide (CO2) through cellular respiration, a key part of the soil carbon cycle, though some carbon may also be incorporated into soil organic matter. The rate and extent of sugar oxidation depend on factors like oxygen availability, the presence of Fe oxides, and soil redox conditions, which can all influence the process. My understanding of why we flush. Just plain water, what does it do? Strips the medium of salts and nutrients making it empty. What does that do? Triggers nutrient recycling within the plant. What's nutrient recycling? It is a natural part of plant senescence, which can be triggered once you know the switches. A 24:1 carbon-to-nitrogen ratio will also trigger. Why won't it trigger autophagy for me? Nitrogen needs to be gone, gone, gone almost. Ammoniacal (organic) nitrogen takes 4-5 times more water to separate it from soil particles than nitrates so what happens is most people jist flush the nitrates, leave all the ammoniacal in there and this prevents autophagy initiating. Nitrogen decays differently depending on its form during the dry. Ammoniacal nitrogen will oxidize in the air, leaving no trace. But nitrates do no decay and turn volatile and smelly and remain trapped until smoked, no matter how long you cure it does not oxidize. This is why you need to trigger it and begin the denitrification process prior to harvest to get rid of all the nitrates. Otherwise, you will smoke it. Flush till autophagy begins, just make sure you add no nitrogen afterwards. Micronutrients for trichomes. Don't leave the medium empty for 2 weeks, that does nothing but reduce yield 10%ish. Trichomes are another thing. Trichomes themselves are not directly affected by flushing; rather, flushing affects the plant's nutrient uptake, which influences the development and final state of the trichomes. Trichomes are filled with antioxidants in the last weeks, which is what makes them cloudy. A lot of the processing of antioxidants requires energy and nutrients (mostly micronutrients ), so you don't want that soil empty for 2 weeks, you just want the carbon nitrogen ratio 24:1and no higher. She still wants what she needs to ripen. Processing antioxidants is energy-intensive; heat and light accelerate the rate at which THC converts to CBN. This is why you lower DLI, lower temps. By doing so, you reduce the oxidative workload caused by photosynthesis, which opens up the oxidative capacity for the production of antioxidants. THC is mostly processed at night when the plant's oxidative capacity is generally moreso "free and available" for work. Oxygen is the alchemist's "fire"

Hello my friends 😇 Purple Lemonade had been flush today !! She looks beautiful that purpul-dark buds are amazing. In next 3 or 4 days I will cut her 😇 Cinderella and Bruce Banner drinking less from a avg. 1.7l/day to 1.25l/day, so end of flowering for this two will be in around 2 weeks. Cinderella looks really good, she should give a good harvest. Update: Day 67 Happy time !! Harvest time !! Finally Purple Lemonade get to the final point. At this moment there is 0% of lemon scents, BUT !! There is a beautiful smell of berries, chocolate and leather in the air. I can't wait to try it All the best, You Lovely Girls Growers 😇 💪 🙏

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls still beautiful, the end is arrived 🏁🏁, Keep flushing Neighbors said stop to the party, Trichromes should be ready, smeel is so so strong 😱😱😱😱 💧 Give water each 2/3 day 2 l Water + Flash Cleaner (3 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 28 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/

This week has gone fine nothing much to report really flower sites are stacking up nice. Trichomes are making an appearance and some nice grapefruit peel smell only subtle but it’s starting to develop. 👍🏼

easy transplant gonna top next week