Likes
Comments
Share
Hola! 22/03/23 - Llevamos 60 días desde que empezamos a germinar las semillas, estamos en la 3ª semana de floración. He tenido que subir la luminaria por que las plantas han pegado estirón y se han plantado a menos de 10cm del led. He instalado la malla scrog por la parte media de la planta para sujetar las ramas y en poco tiempo pondré una segunda malla para sujetar las partes altas. A partir de aquí mi prioridad es no tocarlas para no estresarlas de ninguna manera. Solo buenos riegos, buenas temperaturas y música.
Likes
8
Share
@Bari125
Follow
made a top kola today,during the week I will continue in LST.✌️
Likes
10
Share
They exploded in the 10 days I was gone! Bulk phase in full progress, they're blowing up every day now. Will need to do sth about the humidity at night, getting 80% spikes just before lights on. I will try to have a fully automated system next round with biotabs and blumats and see how far I can take a fully hands off approach here.
Likes
7
Share
@Shinobi
Follow
Nevidel som ich 2 týždne🤪🤪veľké búrky dažde vyzerali pripravené.trichomy mliečne90%hnedé blizny.pre mňa výborné.mier
Likes
2
Share
@Cysolja
Follow
She has really busted out this week! Especially since she was topped. The new budsites have reached the ScrOG net and they all on the same level so should flower nice and evenly! Loving the new grow sack! Super excited to see her starting to bud!
Likes
43
Share
~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/1- Well here we go again fam! This one's going to be super fun with one of my favorite autoflower strains from Seedsman Seeds, growing in a little 2qt. popcorn pot and entered in the 'Best Rarest & Smallest Pot by Seedsman' contest, this one's gonna be a champ! 🤩 Today I went ahead and planted a seed directly into the medium which was pre-moistened with tap water from my well. After I placed the seed about 4-5mm deep, I gently covered it with medium and poured approx. 1oz of water on it. I'll keep the pot in the tent with a Solo cup over it to retain the moisture until it sprouts... Fingers crossed! 🤞🤞 11/3- When I checked on the Zkittlez this evening I was elated to see that it had broken ground sticking up about 4-5mm from the medium! I removed the red Solo cup from her and replaced it with a clear cup that has ventilation holes in it and which I misted the inside of with water to ensure adequate humidity for the seedling. 11/4- This morning I checked on her and she's already up to about 18mm tall but has not shed her shell yet. I'll make sure that the medium stays just moist for now until she's a little older. By late in the evening she had shed her shell and her cotyledon's began opening. I noticed, after taking a close look at her, that her first tiny set of leaves were brownish looking with light colored tips. I immediately thought back to when I was pee-moistening her medium and had a 'high moment' using my other plants nutrient solution which was around 800ppm in her pot instead of the straight well water I usually use. I thought that she was getting nutrient burn causing the funky color of her first leaf set but fortunately by the end of the 20 hour light cycle, she had her first leaf set out and the were a healthy green! 11/7- Well gromies this girl has a week behind her now and I'm elated to say that she's healthy and doing marvelously! Up until now all I've done is make sure that her medium didn't dry out using straight well water ph'd to 6.1 @ 75℉. Today I went ahead and watered/fed her with 0.6L of well water with Dutch Pro Grow 'A' & 'B' added @ 10ml/g, Dutch Pro Multi Total @ 7.6ml/g, Dutch Pro Take Root @ 3.8ml/g, Dutch Pro Silica Von Liebig Special @ 1.2ml/g and Earth Juice Oily Can @ 5ml/g which was then ph'd to 6.0 @ 74℉. The Seedsman Zkittlez Auto is doing great and now is at 2 inches tall with good color. Here we go into her second week since breaking ground and the beginning of a beautiful Seedsman cultivar....follow me! 😎👍❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! May all your days and grows be Blessed! 😎🙏💚
Likes
1
Share
Woche 3 (4seit Keimung) – Vegetationsphase startet richtig durch Die Mädels sind jetzt offiziell in Woche 4 angekommen und man merkt deutlich, dass sie langsam in die nächste Phase gehen. Das Wachstum hat in den letzten Tagen nochmal spürbar angezogen und die Struktur wird von Tag zu Tag stabiler. Alle Pflanzen stehen aktuell in 15L Töpfen und entwickeln sich insgesamt sehr gleichmäßig, auch wenn man langsam erste Unterschiede zwischen den Strains erkennt. ⸻ Pflanzenentwicklung Die meisten Pflanzen zeigen jetzt eine schöne, kompakte Struktur mit kurzen Internodien und kräftigen Stämmen. Besonders die GMO bleibt schön gedrungen, während z. B. Blueberry und teilweise Runtz etwas mehr nach oben wollen. Die Blätter sind satt grün und vital, das neue Wachstum ist teilweise etwas heller, was aber bei dem Tempo absolut normal ist. Insgesamt wirken alle Pflanzen gesund und stressfrei. ⸻ Licht & Setup Die Lampe wird weiterhin schrittweise erhöht (aktuell moderat gefahren), was sich positiv auf den Wuchs auswirkt. Kein Stretch, keine Anzeichen von Lichtstress – genau so soll’s sein. Momentan steht die SF3000 bei 50% Leistung mit einem Abstand von 45-50cm. Der Abstand passt aktuell gut, ich werde die Intensität weiterhin in kleinen Schritten steigern. ⸻ Klima Die Bedingungen sind aktuell ziemlich stabil: • Temperatur: ~20–23°C • Luftfeuchtigkeit: ~60–65% • VPD: ~0.9 kPa Damit liege ich ziemlich genau im optimalen Bereich für die Vegi. ⸻ Gießen Gegossen wird weiterhin kontrolliert im äußeren Ring, um die Wurzeln nach außen zu ziehen. Die Bodenfeuchte liegt aktuell bei ~34%, was sich als sehr guter Wert herausgestellt hat. Man merkt jetzt schon, dass der Wasserverbrauch langsam anzieht. Liege jetzt bei 500ml jeden 3. Tag. ⸻ Nährstoffe Aktuell läuft noch alles über die vorgedüngte Erde. Da jetzt Woche 4 gestartet ist, werde ich in den nächsten Tagen anfangen, den Green House Bio Bloom vorsichtig einzuarbeiten, damit die Nährstoffe rechtzeitig verfügbar sind, wenn die Vorblüte einsetzt. ⸻ Ausblick In den nächsten Tagen wird sich entscheiden, wie stark ich eingreife. Leichtes LST ist geplant – vor allem bei den etwas streckfreudigeren Pflanzen, um ein gleichmäßiges Canopy zu bekommen. Ansonsten gilt weiterhin: beobachten, reagieren, nicht übertreiben. ⸻ Fazit Ich bin aktuell echt zufrieden mit dem Stand. Die Pflanzen sehen gesund aus, das Setup läuft stabil und alles entwickelt sich genau in die Richtung, die ich mir vorgestellt habe. Vielen Dank fürs reinschauen meine growmis, Updates folgen 🏻
Likes
31
Share
@BudVision
Follow
Hi growers, Another week of flowering is behind us. Trichome production is very strong, the aroma is intense and pungent, and the buds are noticeably sticky. The plant is still gaining weight, but rather slowly. I think this plant won’t be a yield champion, but the flavor and aroma could easily make up for it. Peace and happy growing ✌️
Likes
4
Share
@Trinidad
Follow
23.04.2025 Day 51. God Dang these ladies are beginning to pack a punch. In the past week the chemdawg has strected. No smell yet on chemdawg. As for the others, the flower are terping up. The struggling one has begun showing some nice purple flowers and smells like bubblegum. Another one smells sour like a green or unriped mango and the next one just smells sweet like candy. Flowers are swelling and begun to put on weight. During the past week I topped up reservoirs with nutrient solution but today i changed out reservoir with fresh nutrient solution. No training was done This week.
Likes
10
Share
@Kmikaz420
Follow
La recolte été pas mal du tt pour le peut de place disponible^^ j ai eu 160 g d herbe seche et curred Et après le curring le goût est tt simplement sublime !!! Ressemble beaucoup à la mère de chez soma seed 😀 bon vous aurez compris je ne peut juste rien dire de négatif sur cette strain hors mis *qu on la fume beaucoup beaucoup trop vite ^^
Likes
12
Share
The harvest of my dear Stella was supposed to happen on August 4th, but didn’t begin actually until August 9th. I decided to allow her to dry out a bit before beginning the harvest, but I had some other difficulties which made her dry out a whole lot before I ever even got started. You can tell how dry by looking at the pics and video. Luckily, the dryness was limited to her larger leaves. She was already quite dry on the 9th when I started, and was more so by the 12th when I finished. Even after the advanced drying, her wet trimmed weight was still quite a bit. I’ll list the weights all together in a bit. It took 4 days to get the whole plant trimmed, weighed, and hung up for final drying. She was hung up from August 12th till Friday, August 19th. I got busy harvesting another plant while she was hanging up, and just let her be. On August 19th I took all of her branches down and removed the buds to get the true harvest weight of her buds alone. Let’s get to the weight of the whole thing. The overall wet-trimmed weight of the plant was 18.329 ounces with the buds and branches combined. I was a forgetful idiot and forgot to get the weight of the dry buds on the branches before removing the buds. So all we’re left with is the actual harvest weight of the dry buds alone. The overall dry bud weight, or actual “true” harvest weight of the smokable bud is: 7.317 ounces. That’s a wonderful amount of freshly harvested bud to cure. All of the buds were put into 8 quart sized jars filled roughly 3/4 full, and 1 pint sized jar, also 3/4 full. Each jar has a hygrometer as well as 58% bóveda packs to help aid the curing process. This is the 2nd DarkStar plant I’ve harvested, and both were very large plants. I used a scrog method the first time with a net that spread the whole plant out taking up the entire 4x4 area of the tent. This time I wanted to let her grow more naturally. She got so large that I had to bend almost all of her taller branches over using HST methods. I had to bend 3-5 branches over more than once. By doing that, once her buds began to fatten up she got too heavy and needed to be supported just to stand upright. Toward the end she had to literally be tied up to the side of the tent. Stella (DarkStar) was a wonder to grow, and she gave me a good amount of clones that will soon be harvested themselves. It has been a journey with Stella, and I’m happy that the journey is now complete. Happy growing everyone!
Processing
Likes
12
Share
@NorCal311
Follow
This grow I am going to do it differently. I am going to do day tracking instead of date tracking. I am using using pre-grown ( two grows ago) Coco mix with nature suppers soil to experiment with reusing grow medium. The pots are 5 gallon air pots. I have never used these before so we will see. The 1st take on them that they are very messy compared to fabric pots. Once established, I will be using half strength Advanced Nutrients for Coco since these are autos. Day 1 - 3 Seeds soaked overnight and were put directly into the 5 gallon pots. I pre-soaked the Coco with 5ml/gallon Clonex and covered the seeds with a mason jar. Day 2 - Temp stayed around 78 all day with me going in and out of the tent looking for a sprout. Nothing yet. 😀 Kept the Coco moist under the jar. Day 3 - Nothing popping Day 4 - Two have popped. Day 5 - One did not pop so I put another seed in Day 6 - The little ones are growing up. It brings a tear to my eye. 😥 Day 7 - The replaced seed looks to be comming up.
Likes
14
Share
Great strain...will grow again for sure! This plant was easy to grow and produced some great buds. Great strain for a low headroom grow area. I would love to grow some more Sweet Seed Auto strains 😊
Likes
7
Share
Likes
4
Share
Week 3 all is fine growing as they should be and responding good tonthe 24 hours of light
Likes
59
Share
Danke @SlowpokeFuegobud für den Hinweis, dass ein Video für jede Woche benötigt wird. Ich werde nach und nach Videos für die einzelnen Wochen nachreichen. Ich hab mir überlegt mit den Videos einen genaueren Einblick über meine Erde, Keimung, Wie bekämpfe ich Trauermücken etc zu geben. Die Sherbet reift aus. die masstphase ist zu ende. sie klebt an allen ecken. die bildung der trichome ist atemberaubend. Lange hat sie nicht mehr!
Likes
19
Share
Likes
10
Share
The pistols are turning a brown colour this is the end of week 2 going into week 3. Does anyone know if this is normal with LED lighting? I have put a close up on the video.